Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
File Operations
136
Displaying Clip Information
1 Select the desired clip in the clip index screen.
2 On the file menu, select [Display Clip Info].
• The [Clip Info] screen will appear.
• Push the joystick left/right to move to the previous/next clip. Press the CANCEL button to return to the index
screen.
1
INT REC, FRM REC or S&F REC will be displayed depending on the special recording mode.
2
For clips recorded using slow & fast motion recording, the shooting frame rate and playback frame rate will both be displayed.
3
XF-AVC clips only.
Displaying User Memo/News Metadata
From the [Clip Info] screen, you can push the joystick up or down, or touch [ ]/[ ] on the screen to display user
memo or News Metadata details. To return to the [Clip Info] screen, push the joystick in the direction displayed to
the left of [Clip Info] at the bottom of the screen ([ ]/[ ]) or touch [Clip Info] at the top of the screen.
Displaying Custom Picture Settings
If a custom picture file was embedded with the clip, you can push the joystick up or down, or touch [ ]/[ ] on
the screen to display the custom picture settings used. To return to the [Clip Info] screen, push the joystick in the
direction displayed to the left of [Clip Info] at the bottom of the screen ([ ]/[ ]) or touch [Clip Info] at the top of
the screen.
7
1
3
2
6
8
13
12
11
14
15
16
9
10
4
5
1 Thumbnail of the selected clip
2 Clip geotagged with GPS information
3 Thumbnail of the previous clip
4 Thumbnail of the next clip
5 Special recording mode
1
(A 105)
6 Recording date and time
7 Clip file name (A 37)
8 Compression, bit rate and resolution (A 52)
9 Frame rate
2
(A 53)
10 Shot mark (A 137) and $ mark / % mark
3
(A 137)
11 Custom picture file embedded
3
(A 122)
12 Proxy clip (A 54)
13 Color sampling
3
and color bit depth (A 53)
14 Clip’s start time code
15 Clip’s end time code
16 Clip duration