Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Applying a LUT/the View Assistance Function to the LCD Screen
148
Applying a LUT/the View Assistance Function to the LCD Screen
While recording using special gamma curves, you can apply a LUT to the image output from the SDI OUT
terminal or the View Assistance function to the image displayed on the screen and video output from the HDMI
OUT terminal. These functions change the color space (and in some settings, the gamma curve) used, making it
easier to check the image on the display device used.
Whether or not a LUT/the View Assistance function can be used, and the available LUTs, depend on the
[Gamma/Color Space] and [Look File] settings in the custom picture file (A 121).
LUTs
List of LUTs
Available LUTs
Applied LUT
Output settings
with LUT applied
Description
Gamma curve Color space
[BT.709]
BT.709
Wide DR
BT.709
LUT for viewing on external monitors compatible with BT.709 specifications.
[BT.2020]
BT.709
Wide DR
BT.2020
LUT for viewing on external monitors compatible with ITU-R BT.2020 standards,
which define parameters for ultra-high-definition television (4K/8K).
[DCI] DCI DCI-P3
LUT for viewing on external monitors that support color spaces and gamma
curves that follow the guidelines established by DCI (Digital Cinema Initiatives).
[PQ] PQ BT.2020
LUT for viewing HDR (high dynamic range) images on external monitors
compatible with the PQ standard defined by ITU-R BT.2100. The signal output will
use narrow range (video range) coding.
[HLG] HLG BT.2020
LUT for viewing HDR (high dynamic range) images on external monitors
compatible with the HLG standard defined by ITU-R BT.2100. The signal output
will use narrow range (video range) coding.
[User LUT1] to
[User LUT4]
Registered
gamma curve
BT.709,
BT.2020,
unchanged
LUT for viewing on the LCD screen. Used to check the registered gamma curve,
as well as the color space and range settings.
Custom picture file Available LUT
[Look File]
[Gamma/Color Space]
after the Look File is applied
[BT.709] [BT.2020] [DCI] [PQ] [HLG]
[User LUT1] to
[User LUT4]
[Off] –
See the following table.
[On]
[Conform to Custom Picture]
[SDR BT.709] – – – – – –
[SDR BT.2020] Ü – – – – –
[HDR PQ(BT.2100)] Ü – – – – –
[HDR HLG(BT.2100)] Ü – – – – –