Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Applying a LUT/the View Assistance Function to the LCD Screen
150
Available View Assistances (when not using a Look File)
Applying a LUT
1 Select > [¢ Monitoring Setup] > [LUT: SDI] > [On].
• The LUT is applied and the gamma curve and color space of the displayed image will change.
2 Select > [¢ Monitoring Setup] > [LUT Selection: SDI] > Desired LUT.
• When only one option is available, it will be grayed out.
NOTES
• If you set an assignable button to [LUT: SDI] (A 115), you can press the button to turn the selected LUT on
and off.
• The LUT will be temporarily disabled when you select > [
A
Assistance Functions] > [False Color:
LCD] > [On].
Adjusting the Color Quality for HLG Output
You can change the quality of the color reproduction when the [HLG] LUT is used.
Select > [¢ Monitoring Setup] > [HLG Color] > Desired option.
Options
[BT.2100]: Color reproduction according to ITU-R BT.2100 specifications.
[Vivid]: More saturated color reproduction according to the 'Traditional Colour' approach in ITU-R
BT.2390.
User LUTs
You can register in the camera up to four Look Files and apply them to video output from the SDI OUT terminal.
You can adjust the output color space and range of user LUTs.
Use an SD card to copy LUT files to the camera.
Registering a User LUT
1 Insert the SD card with the desired LUT file (.cube format) into the camera’s SD card slot.
2 Select > [¢ Monitoring Setup] > [User LUT 1] to [User LUT 4] > [Register].
[Gamma/Color Space]
Available View Assistances
[BT.709] [HDR Assist. (800%)] [HDR Assist. (400%)]
[Canon Log 3 / C.Gamut] Ü Ü Ü
[Canon Log 3 / BT.2020] Ü Ü Ü
[Canon Log 3 / BT.709] Ü – –
[PQ / BT.2020] Ü – Ü
[HLG / BT.2020] Ü – Ü
[BT.709 Wide DR / BT.2020] Ü – –
[BT.709 Wide DR / BT.709], [BT.709 Normal / BT.2020],
[BT.709 Normal / BT.709], [BT.709 Standard / BT.709]
– – –