Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Names of Parts
16
IMPORTANT
• Do not use tripods and other accessories with mounting screws exceeding the depth of the screw holes on
the camera as this may damage the camera.
• Mounting the camera on a tripod using only one of the 1/4"-20 screw holes for tripod reinforcement may
damage the camera.
2
1
34 5
1 Built-in speaker (A 134)
Located below the space where the LCD monitor
is stored.
2 Socket for tripod's anti-rotation pin (5 mm
(0.20 in.) deep, x2)
For tripods with 1/4"-20 mounting screws.
3 Screw hole for 1/4"-20 mounting screws
(7.5 mm (0.30 in.) deep)
4 Socket for tripod's anti-rotation pin (5.5 mm
(0.22 in.) deep)
For tripods with 3/8"-16 mounting screws.
5 Screw hole for 3/8"-16 mounting screws
(10 mm (0.39 in.) deep)