Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Configuring Connection Settings
164
* A decoder compatible with FEC error correction is required.
Browser Remote
This section continues the connection settings wizard (A 161). A user name and password are required to log
in to the Browser Remote application. In the function settings you will configure up to three different users for
single-user or two-user operation.
1 Select [Create New Func. Setting].
• Once you have added multiple function settings, you can select [Select Existing Setting] to reuse Browser
Remote settings that you saved previously.
2 Enter the user names and passwords as necessary.
3 Select [OK] twice.
• The function settings are saved to a [MODE] file.
4 Select the connection setting (SET1 to SET20) where to save the settings.
5 Select [OK].
• The camera will connect to the network and will be ready to accept commands from the Browser Remote
application (A 177).
Canon App (Connecting to a Smartphone)
This section details the necessary settings to connect the camera to a smartphone through a network. Be sure
to connect both the smartphone and the camera to the same network in advance.
A smartphone application is necessary to connect the camera to a smartphone. For details on downloading the
necessary smartphone application, refer to
Transferring Recordings to a Smartphone
(A 184). For more details,
refer to the smartphone's instruction manual.
1 Select [Create New Func. Setting].
• Once you have added multiple function settings, you can select [Select Existing Setting] to reuse Canon App
settings that you saved previously.
2 Select [OK].
3 As indicated on the screen, open the application on the smartphone.
4 Select the camera using the smartphone application.
• If the camera and the smartphone are connected to the same network, the camera will be detected
automatically.
5 Select [OK].
• The connection will be completed.
• The function settings are saved to a [MODE] file.
6 Select the connection setting (SET1 to SET20) where to save the settings.
7 Select [OK].
• The connection will be completed and the camera will be ready to operate with the connected smartphone
(A 184).
Other Connection Methods
This section explains how to configure communication settings using methods other than the WPS push button.
Ethernet Settings
1 In the [Network Type] screen, select [Ethernet ].