Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
171
Configuring Connection Settings
Individual settings available for manual change (communication settings)
Individual settings available for manual change (function settings)
Menu item Setting options and additional information
[Wi-Fi]
[SSID] –
[Advanced Settings] [Authentication Method], [Password]
[TCP/IPv4]
[IP Address Settings]* [Automatic Setting], [Manual Setting]
[DNS Server] [Disable], [Auto Assign], [Manual Setting]
[DNS Address]*, [IP Address]*,
[Subnet Mask]*, [Gateway]*
[TCP/IPv6]
[TCP/IPv6 Settings]* [Disable], [Enable]
[Manual Setting] [Disable], [Enable]
[DNS Server] [Disable], [Auto Assign], [Manual Setting]
[DNS Address],
[Manual Address],
[Prefix Length], [Gateway]
Enter the desired address using the data entry screen (A 27).
Menu item Setting options and additional information
[FTP Transfer]
[Destination Server]
[Server]*, [Port No.]*
[User Name/Password]
[User Name]*,
[Password]*
[Destination Folder]*
[Dest. Folder Structure] [Default], [Camera]
[Overwrite Files] [Skip], [Save As (New Name)], [Overwrite]
Determines how to deal with files to be transferred when files with the same name already exists in the
destination folder.
[Skip]: The file will not be transferred.
[Save As (New Name)]: The file will be transferred and “_1” will be added to the end of the file name.
[Overwrite]: The file will be transferred, overwriting any file with the same name on the FTP server.
[Passive Mode]* [Disable], [Enable]
[New Folder by Date] [Enable], [Disable]
[Enable]: A new subfolder under the transfer destination folder “YYYYMMDD\HHMMSS” will be created for every
transfer operation.
[Disable]: All the files will be transferred to the folder specified for the [Destination Folder] setting.
[IP Streaming]
[Protocol]* [UDP], [RTP], [RTP+FEC], [RTSP+RTP]
[Destination Server]*,
[Dest. Port No.]*,
[FEC Port No.]*
[FEC Interval] 10 to 100 (intervals of 5)
[RTSP: User Name]*,
[RTSP: Password]*