Owner's Manual

Table Of Contents
Configuring Connection Settings
172
* Change these settings as explained in the wizard (A 161).
Changing Browser Remote Settings
1 Select > [ Network Settings] > [Advanced Settings] > [Browser Remote Settings].
2 Change the various settings as necessary.
You can select [Port No. (HTTP)] or [Port No. (HTTPS)] to change the port numbers used for each
connection. Using the default port numbers (HTTP: 80, HTTPS: 443) is recommended.
To use an HTTPS connection, select [HTTPS] > [Enable].
To use a secure HTTPS connection, use a Camera Access Point connection setting and connect the
network device to the camera using a normal HTTP connection (A 177) and download the necessary
certificate from the Browser Remote’s settings tab (A 183). After you import the certificate you
downloaded to your Web browser, you will be able to use a secure HTTPS connection.
[Video Output Conf.]* [9Mbps/1920x1080 59.94P], [4Mbps/1920x1080 59.94P], [9Mbps/1920x1080 50.00P],
[4Mbps/1920x1080 50.00P], [9Mbps/1920x1080 59.94i], [4Mbps/1920x1080 59.94i],
[9Mbps/1920x1080 50.00i], [4Mbps/1920x1080 50.00i],
[Audio Out Channels]* [CH1/CH2], [CH3/CH4]
Menu item Setting options and additional information