Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
179
Browser Remote: Controlling the Camera from a Network Device
Using Browser Remote
NOTES
• Browser Remote does not support multi-touch gestures.
The Main Remote Operation Screen
8910
1
2
5
4
3
6
7
11 12 13 1814 16 1715
1Network connection indicator
While Browser Remote is correctly connected to
the camera, the dots will keep turning on and off
in a loop.
2 Live view screen
Shows the camera’s live view image.
3 Recording operation (A 45) and recording
command (A 189) (same as on the camera)
4 Time code (same as on the camera)
5 Add a shot mark
6 Add a % mark
7 Add an $ mark
8 Camera’s nickname (A 168)
9 [LIVE VIEW] button
Touch the button to display the camera’s live view
image on the Browser Remote screen.
10 [Touch Focus] button
Touch the button to unlock (enable) the touch
focus mode.
11 IP streaming
Available only when using a connection setting
with both the [Browser Remote] and [IP
Streaming] function settings.
12 [REC] button
Touch the button to start recording. The recording
operation indicator changes to [ÜREC] and the
center of the button turns red.
The time code will advance while recording.
Touch the button again to stop recording. The
recording operation indicator changes back to
[STBY].
13 Card selection and approximate remaining
recording time