Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Names of Parts
18
Removing and attaching the terminal covers
You can remove the covers of the camera’s terminals to access them more easily. To remove a terminal’s
cover, open the cover and gently pull it straight out. To attach back the terminal cover, insert the connecting
strip into the opening. If the connecting strip is difficult to grasp, use a pair of tweezers or similar tool.
1
2
3
4
20 21 22 23 24
56 7 8 9
10
11
12
13
14
15
16
17
18
19
25
1 LCD monitor with touch screen (A 23)
2 SLOT SELECT (SD card selection) button (A 33)
3 SD card access indicators (SD2/SD3) (A 32)
4 SD card slots (A 32): SD CARD2 (top) and
SD CARD3 (bottom)
In this manual, SD cards in each slot are referred
to as “SD card A” and “SD card B”, respectively.
5Eye cup (A 30)
6Eye sensor (A 29)
7 Viewfinder (A 29)
8 Dioptric adjustment lever (A 29)
9 INPUT 1/INPUT 2 (audio input selection) switch
(A 94)
10 REC (start/stop recording) button (A 41)
11 Joystick (A 25)
Can be pushed in 4 directions. You can also push
the joystick itself to confirm a selection.
12 CANCEL button (A 25)
13 USB (Type-C) terminal (A 113, 155)
14 (Ethernet) indicator (A 159)
15 REMOTE B terminal
For connecting the optional RC-V100 Remote
Controller (A 111).
16 TIME CODE terminal (A 88)
17 (Ethernet) terminal (A 159)
18 G-LOCK/SYNC terminal (A 89)
19 SDI OUT terminal (A 139, 144)
20 Card compartment covers (A 32)
21 BATTERY RELEASE button (A 20)
22 Battery compartment (A 20)
23 DC IN terminal (A 22)
24 HDMI OUT terminal (A 139, 145)
25 DC cable clamp (A 22)