Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
8
185
Additional Information
Menu Options
For details about how to select an item, refer to
Using the Menus
(A 25). For details about each function, see
the reference page or the explanation accompanying the menu entry. Setting options in boldface indicate default
values.
Depending on the camera’s operating mode and the settings, some menu items may not be available. Such
menu items do not appear or appear grayed out in menu screens.
To skip directly to the page of a specific menu:
[
v
Camera Setup] menu (CAMERA mode only)
[
v
Camera Setup] menu A 185
[
/
Custom Picture] menu A 187
[Æ Recording/Media Setup] menu A 187
[
¡
Audio Setup] menu A 189
[
¢
Monitoring Setup] menu A 190
[
A
Assistance Functions] menu A 193
[ Network Settings] menu A 194
[ Assignable Buttons] menu A 195
[
B
System Setup] menu A 195
[
¥
My Menu] customized menu A 196
Menu item Setting options and additional information
[Light Metering] [Backlight], [Standard], [Spotlight] (A 64)
[AE Shift] –2.0 to +2.0 in 0.25 point intervals (±0) (A 64)
[AE Response] [High], [Normal], [Low] (A 62)
[Iris Increment] [1/3 stop], [1/4 stop] (A 63)
[Fine Increment] [On], [Off]
[Iris Limit] [On], [Off] (A 62)
[Iris Ring Direction] [Reverse], [Normal] (A 63)
[Shutter Increment] [1/3 stop], [1/4 stop] (A 57)
[ISO/Gain] [ISO], [Gain] (A 59)
[Limit for Auto Mode] When [ISO/Gain] is set to [ISO]:
ISO 200 to [Off/ISO 12800] in 1/3 stop intervals
When [ISO/Gain] is set to [Gain]:
–6 dB to [Off/21.0 dB] in 1 dB intervals
(A 59)
Available values may differ depending on the gamma settings.
[ISO/Gain Increment] [ISO]: [1 stop], [1/3 stop]
[Gain]: [Normal], [Fine]
(A 59)
[ISO/Gain L] When [ISO/Gain] is set to [ISO]:
[1 stop] ISO200 to ISO12800 in 1 stop intervals
[1/3 stop] ISO200 to ISO12800 in 1/3 stop intervals
When [ISO/Gain] is set to [Gain]:
[Normal] –6.0 dB to 21.0 dB in 3 dB intervals ([0.0 dB])
[Fine] –6.0 dB to 21.0 dB in 0.5 dB intervals ([0.0 dB])
(A 59)
The initial values may differ depending on the gamma settings:
[BT.709 Normal], [BT.709 Standard]: ISO200 ([1 stop] / [1/3 stop])
[PQ], [HLG]: ISO400 ([1 stop]), ISO320 ([1/3 stop])
[BT.709 Wide DR], [Canon Log 3]: ISO800 ([1 stop]), ISO500 ([1/3 stop])