Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Menu Options
186
[ISO/Gain M] When [ISO/Gain] is set to [ISO]:
[1 stop] ISO200 to ISO12800 in 1 stop
[1/3 stop] ISO200 to ISO12800 in 1/3 stop intervals
When [ISO/Gain] is set to [Gain]:
[Normal] –6.0 dB to 21.0 dB in 3 dB intervals ([6.0 dB])
[Fine] –6.0 dB to 21.0 dB in 0.5 dB intervals ([6.0 dB])
(A 59)
The initial values may differ depending on the gamma settings:
[BT.709 Normal], [BT.709 Standard]: ISO400 ([1 stop] / [1/3 stop])
[PQ], [HLG]: ISO800 ([1 stop]), ISO640 ([1/3 stop])
[BT.709 Wide DR], [Canon Log 3]: ISO1600 ([1 stop]), ISO1000 ([1/3 stop])
[ISO/Gain H] When [ISO/Gain] is set to [ISO]:
[1 stop] ISO200 to ISO12800 in 1 stop
[1/3 stop] ISO200 to ISO12800 in 1/3 stop intervals
When [ISO/Gain] is set to [Gain]:
[Normal] –6.0 dB to 21.0 dB in 3 dB intervals ([12.0 dB])
[Fine] –6.0 dB to 21.0 dB in 0.5 dB intervals ([12.0 dB])
(A 59)
The initial values may differ depending on the gamma settings:
[BT.709 Normal], [BT.709 Standard]: ISO800 ([1 stop] / [1/3 stop])
[PQ], [HLG]: ISO1600 ([1 stop]), ISO1250 ([1/3 stop])
[BT.709 Wide DR], [Canon Log 3]: ISO3200 ([1 stop]), ISO2000 ([1/3 stop])
[Shockless Gain] [High], [Normal], [Low], [Off]
[High Sensitivity Mode] [On], [Off] (A 60)
[White Balance: PRESET] [¼ Daylight], [É Tungsten], [
È
Kelvin] (A 65)
[Shockless WB] [On], [Off] (A 65)
[AWB Response] [High], [Normal], [Low] (A 66)
[C. Temp. Increment] [Mired], [Kelvin] (A 65)
[AF Mode] [AF-Boosted MF], [Continuous] (A 73)
[AF Frame] [Whole Area], [Large], [Small] (A 78)
[AF Frame Position] [Selectable], [Center Frame]
[AF Speed] [High], [Normal], [Low] (A 77)
[AF Response] [High], [Normal], [Low]
[Face Det. & Tracking] [On], [Off] (A 78)
[Face Detection AE] [On], [Off]
[Face AF] [Face Priority], [Face Only]
[Eye Detection] [On], [Off]
[Focus Limit] [On], [Off] (A 80)
[Focus Ring Direction] [Reverse], [Normal] (A 73)
[Focus Ring Response] [High], [Normal], [Low]
[Zoom Speed Level] [High], [Normal], [Low]
[High-Speed Zoom] [On], [Off] (A 70)
[Digital Zoom] [Tele-converter 6.0x], [Tele-converter 3.0x], [Tele-converter 1.5x], [Digital 300x],
[Advanced 30x], [Off]
(A 68)
[Handle Zoom Speed] [Off], [1] to [16] (A 71)
[Grip Zoom Speed] [Constant], [Variable], [User Setting] (A 69)
[Constant Speed] [1] to [16] ([8])
[User Setting] [User 1] to [User 3]
[Color Bars] [On], [Off] (A 98)
[Color Bar Type] [SMPTE], [EBU]
1
, [ARIB]
[Flicker Reduction] [Automatic], [Off] (A 58)
Menu item Setting options and additional information