Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Menu Options
190
[
¢
Monitoring Setup] menu
[INPUT 1 Mic Att.], [INPUT 2 Mic Att.] [On], [Off] (A 96)
[INPUT 1 Mic Low Cut],
[INPUT 2 Mic Low Cut]
[Off], [LC1], [LC2] (A 97)
[INPUT Reference Level] [–18 dB], [–20 dB] (A 97)
[INPUT Limiter] [On], [Off] (A 96)
[MIC Att.] [On], [Off] (A 97)
[MIC Low Cut] [Off], [LC1], [LC2] (A 97)
[MIC Input] [MIC (with Power Supply)], [MIC], [LINE] (A 94)
[Built-in Mic Sensitivity] [Normal], [High] (A 97)
[Built-in Mic Att.] [On], [Off] (A 97)
[Built-in Mic Low Cut] [Off], [LC1], [LC2] (A 97)
[1 kHz Tone] [–12 dB], [–18 dB], [–20 dB], [Off] (A 98)
[Headphone Volume] [Off], 1 to 15 (8) (A 134)
[Speaker Volume] [Off], 1 to 15 (8)
In MEDIA mode only, this setting is an alternative way to adjust the built-in speaker's volume.
[Monitor Channels] [CH1/CH2], [CH1/CH1], [CH2/CH2], [CH1+2/CH1+2], [CH3/CH4], [CH3/CH3], [CH4/CH4],
[CH3+4/CH3+4], [CH1/CH3], [CH2/CH4], [CH1+3/CH2+4]
(A 153)
[HDMI OUT Channels] [CH1/CH2], [CH3/CH4]
[Assign CH2 Switch & Dial] [CH2], [CH3] (A 91)
Adjust the audio levels for channel CH2 or CH3 using the CH2 audio level switch and dial.
Menu item Setting options and additional information
[LCD Brightness],
[LCD Contrast]
–50 to +50 (±0) (A 23)
[LCD Color] –20 to +20 (±0)
[LCD Sharpness] 1 to 4 (2)
[LCD Luminance] [Normal], [+1], [+2]
[LCD Mirror Image] [On], [Off]
[VF Brightness],
[VF Contrast]
–50 to +50 (±0) (A 29)
[VF Color] –20 to +20 (±0)
[VF Sharpness] 1 to 4 (2)
[VF Luminance] [Normal], [High]
[VF Eye Sensor] [On], [Off] (A 29)
[Run VF at x2 speed] [On], [Off] (A 29)
[B&W Image: LCD],
[B&W Image: VF],
[B&W Image: SDI],
[B&W Image: HDMI]
[On], [Off] (A 23,
29)
[OSD Output: SDI],
[OSD Output: HDMI]
[On], [Off] (A 145)
[DISP Level 1] [All Displays], [All Displays (Periph. Border)] (A 46)
[DISP Level 2] [Main Recording Displays], [Only FUNC/MENU]
[DISP Level 3] [Only REC/STBY], [No Displays]
Menu item Setting options and additional information