Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
193
Menu Options
[
A
Assistance Functions] menu
Menu item Setting options and additional information
[Focus Guide] [On], [Off] (A 74)
[Peaking: LCD], [Peaking: VF],
[Peaking: SDI], [Peaking: HDMI]
[On], [Off] (A 75)
[Peaking] [Peaking 1], [Peaking 2]
[Peaking 1]
[Color] [White], [Red], [Yellow], [Blue]
[Gain] [Off], 1 to 15 (8)
[Frequency] 1 to 4 (2)
[Peaking 2]
[Color] [White], [Red], [Yellow], [Blue]
[Gain] [Off], 1 to 15 (15)
[Frequency] 1 to 4 (1)
[Magnification] [On], [Off] (A 75)
[Magn. Output] [LCD], [VF], [SDI], [HDMI]
[B&W during Magn.] [On], [Off]
[False Color: LCD], [False Color: VF],
[False Color: SDI],
[False Color: HDMI]
[On], [Off] (A 84)
[False Color Index] –
[Zebra: LCD], [Zebra: VF],
[Zebra: SDI], [Zebra: HDMI]
[On], [Off] (A 84)
[Zebra] [Zebra 1], [Zebra 2], [Zebra 1+2]
[Zebra 1 Level] [5 ±5%] to [95 ±5%] in 5 percentage point intervals ([70 ±5%])
[Zebra 2 Level] 0% to 100% in 5 percentage point intervals (100%)
[WFM: LCD], [WFM: VF], [WFM: SDI],
[WFM: HDMI]
[On], [Off] (A 99)
[WFM Function] [Waveform Monitor], [Vectorscope]
[Waveform Settings] (A 99)
[Position] [Right], [Left]
[Type] [Line], [Line+Spot], [Select Line], [RGB], [YPbPr]
[Gain] [1x], [2x]
[Vertical Scale for HDR] [IRE], [PQ/HLG]
[Y Position] [0%], [15%], [30%], [45%], [50%]
[Select Line] 0 to 719 in 1-line increments (360), 0 to 1079 in 1-line increments (540),
0 to 2158 in 2-line increments (1080)
Available options depend on the resolution and operating mode (CAMERA/MEDIA mode).
[Vectorscope Settings] (A 100)
[Position] [Right], [Left]
[Type] [Normal], [Spot]
[Gain] [1x], [2x]
[Markers: LCD], [Markers: VF],
[Markers: SDI], [Markers: HDMI]
[On], [Off] (A 82)
[Center Marker] [Yellow], [Blue], [Green], [Red], [Black], [Gray], [White], [Off] (A 82)
[Center Marker Type] [Cross 1], [Cross 2], [Dot 1], [Dot 2]
[Horizontal Marker],
[Vertical Marker], [Grid Marker]
[Yellow], [Blue], [Green], [Red], [Black], [Gray], [White], [Off]