Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
195
Menu Options
[ Assignable Buttons] menu
Following are the default settings for each assignable button. For a complete list of the functions that can be
assigned, refer to the detailed table (A 116).
[
B
System Setup] menu
Menu item Setting options and additional information
[Camera] 1: [Powered IS], 2: [Peaking: All], 3: [Zebra: All], 4: [WFM: All], 5: [Review Recording],
6: [Magnification], 7: [Magnification] (MEDIA mode: [INDEX]), 8: [FUNC], 9: [Status],
10: [DISP], 11: [(NONE)]
[Browser Remote] 1: [Magnification], 2: [Peaking: All], 3: [Zebra: All], 4: [WFM: All]
[REMOTE A/B] 1: [Magnification], 2: [Peaking: All], 3: [Zebra: All], 4: [WFM: All]
Menu item Setting options and additional information
[Reset] [All Settings], [Assignable Buttons]
These settings reset the following camera settings to default values/settings.
[All Settings]: All the camera’s settings except for the hour meter.
[Assignable Buttons]: Only the assignable buttons.
[Transfer Menu/
/
] (A 128)
[Save] [To Camera], [To SD Card B]
[Load] [From Camera], [From SD Card B]
[Time Zone] List of world time zones.
[UTC-05:00 New York] or [UTC+01:00 Central Europe]
1
(A 24)
[Date/Time] –
[Date Format] [YMD], [YMD/24H], [MDY], [MDY/24H], [DMY], [DMY/24H]
1
[Language
H
] [Deutsch], [English], [Español], [Français], [Italiano], [Polski], [Português],
[Русский], [Українська], [], [ ], [ ]
(A 24)
[REMOTE Term.] [NU Protocol (REMOTE B)], [Standard + RC-V100], [RC-V100 (REMOTE B)],
[RC-V100 (REMOTE A)], [Standard]
(A 111)
NU Protocol refers to a Canon proprietary communication protocol that makes connecting to certain
accessories possible.
[HDMI Output Signal] [3840x2160P], [1920x1080P], [1920x1080i], [1280x720P] (A 145)
[Linked to HDMI Monitor] [On], [Off]
[SDI Output] [On], [Off] (A 144)
[SDI Output Signal] [3840x2160P], [1920x1080P], [1920x1080i(PsF)], [1280x720P],
[720x480i]* or [720x576i]*
* Depends on the system frequency.
[3G-SDI Mapping] [Level A], [Level B] (A 144)
[SD Resize on Output] [Letterbox], [Side Crop], [Squeeze] (A 144)
[Time Code Mode] [Preset], [Regen.] (A 85)
[Time Code Run] [Rec Run], [Free Run]
[Time Code DF/NDF] [DF], [NDF] (A 86)
[Set Time Code] [00:00:00:00] to 59.94 Hz: [23:59:59:29]
50.00 Hz: [23:59:59:24]
(A 85)
[TC In/Out] [In], [Out] (A 88, 89)
[User Bit Recording Mode] [Internal], [External] (A 88)
[User Bit Type] [Setting], [Time], [Date] (A 87)
[G-LOCK/SYNC Term.]
2
[HD Sync Output], [Genlock Input] (A 89, 90)