Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
21
Preparing the Power Supply
Checking the Remaining Battery Charge
When the camera is turned on, you can check the approximate remaining battery usage time (in minutes) by
looking at any recording/playback screen or the [B System Setup] status screen (A 202). You can also check
the approximate charge level on the battery itself.
Press the CHECK button on the battery. An indicator will
light for approximately 3 seconds and show the
approximate remaining battery charge.
0-25%
26-50%
51-75%
76-100%
NOTES
• The remaining battery charge level displayed in minutes on the screen may not match the [B System Setup]
status screen or the indicators on the battery pack.
• The effective usage time of the battery pack may decrease when using a bright screen setting, when recording
in cold surroundings, etc.
• The camera's power consumption may vary depending on the usage conditions. When recording, it is
recommended to prepare a battery charge level that allows for a longer recording time than planned (2 to 3
times).
CHECK buttonBattery charge
indicator