Owner's Manual

225
Specifications
• White Balance
Custom white balance (two sets, A and B); two preset settings (daylight, 5,600 K
1
and tungsten lamp,
3,200 K
1
); color temperature setting (2,000 K to 15,000 K); automatic white balance (AWB)
Color temperature and color compensation (CC) adjustment available for all settings except custom white
balance and AWB.
1
Color temperatures are approximate and given only as a reference.
• Focus
Manual focus, autofocus (AF-boosted MF, continuous AF, Face AF); face detection and subject tracking
available
AF type: Dual Pixel CMOS AF, contrast-detection AF
•Image Stabilization
Optical-shift image stabilizer + digital compensation (Standard IS, Dynamic IS, Powered IS)
• Sensor Sensitivity (2000 lux, 89.9% reflection, [High Sensitivity Mode] set to [On])
59.94 Hz: F12 (at 59.94P)
50.00 Hz: F13 (at 50.00P)
• Infrared mode: Available, including built-in infrared light
•Wi-Fi
Wireless Standard: IEEE802.11b/g/n (2.4 GHz band), IEEE802.11a/n/ac (5 GHz band)
Connection Methods:
Infrastructure (Wi-Fi Protected Setup (WPS), search for access points, manual), Camera Access Point
Authentication Methods: Open, shared key, WPA-PSK, WPA2-PSK
Encryption Methods: WEP-64, WEP-128, TKIP, AES
• Built-in Microphone
Stereo electret condenser microphone
• Size of Photos
3840x2160
Terminals
• SDI Terminal
BNC jack, output only, 0.8 Vp-p / 75 , unbalanced
Video
SD: SMPTE ST 259
HD: SMPTE 292
3G: SMPTE 424, SMPTE 425
6G: SMPTE ST 2081
12G: SMPTE ST 2082
Audio
SD: SMPTE ST 272
Other than SD: SMPTE ST 299
Embedded audio, time code (VITC/LTC)
Supplemental displays (superimposed onscreen displays, peaking, zebra pattern, magnification, B&W display,
waveform monitor, false color) can also be output.
•HDMI OUT Terminal
HDMI connector, output only, time code
- Assistance displays can be output (onscreen displays, peaking, zebra pattern, magnification, B&W image,
video scope, false color).