Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Using the Menus
26
• You can also touch the desired page or menu item.
• Going forward, this operation will be referred to as “press SET” in this manual.
4 Select the desired menu item ([Language
H
], in the example) and then press SET.
• Push the joystick left/right to scroll through the menu pages. Moving left/right from the first/last page will
move to the previous/next setup.
• Push the joystick up/down to move the cursor over the menu items on the page.
• You can also drag the screen left/right to navigate pages, or drag the screen up/down to move the orange
selection frame. You can also select a menu item by lifting your finger when you get to the desired item.
5Push the joystick up/down to select the desired setting option and then press SET.
• During the selection, the currently selected option is indicated with a mark. Press SET to confirm your
selection and go back to the previous screen.
• When many options are available, a scroll bar will appear on the right. Scroll up or down to see other
options.
• You can also touch the desired option.
• Press the CANCEL button or select [L] and press SET to return to the previous menu level.
6Press the MENU button to close the menu.
• Pressing the MENU button at any time closes the menu.
NOTES
• Unavailable items may appear grayed out.
• On some screens, the following icons may be displayed as a guide: , , . They refer, respectively,
to pressing the joystick, the MENU button (or touching the onscreen guide) and the CANCEL button.
• When an RC-V100 Remote Controller is connected to the camera, you can use the remote controller’s up/
down/left/right/SET buttons in the same way as the camera’s joystick. Pressing the SET button is equivalent to
pressing the joystick itself to confirm a selection.
• You can check most of the current settings on the status screens (A 197).
Using the Customized Menus (My Menu)
In CAMERA mode, you can register up to 6 frequently used menu settings under a My Menu page for easy
access. You can save up to 5 separate sets of My Menu settings each with 6 options for different shooting
situations. Furthermore, if you set an assignable button to [My Menu] (A 115), you can press the button to
access your registered menu settings even faster and more easily.
Adding Menu Settings
1 Select > [¥ My Menu] > Desired menu page > [Edit] > [Register].
• A screen will appear where you can select the menu setting you want to add.
• Press the CANCEL button to cancel the operation and return to the regular menu.
2 Select the menu setting you want to add.
3 Select [OK].
• The menu setting you registered will now appear under the currently selected My Menu set.
Rearranging Menu Settings
1 Select > [¥ My Menu] > Desired menu page > [Edit] > [Move].
2 Select the menu setting you want to move.
•The
]
icon will appear next to the setting you selected to move.