Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
45
Recording Video and Photos
Right side of the screen
4
Double slot recording (A 35). 2: [Recording Mode]
Recording operation
STBY, ÜREC Clip recording: record standby, recording.
S&F STBY,
S&F
ÜREC
Slow & fast motion recording (A 105): record standby, recording.
PRE STBY,
PRE
ÜREC
Pre-recording (A 107): record standby, recording.
FRM STBY,
FRM
ÜREC,
FRM
ÜSTBY
Frame recording (A 107): record standby, recording.
INT STBY,
INT
ÜREC,
INT
ÜWAIT
Interval recording (A 108): record standby, recording.
CONT, ÜCONT Continuous recording (A 109)
1s to 10m00s Interval counter. 2: [Interval Counter]
`
Recording command (A 145). 2: [Rec Command]
00.00P, 00.00i Frame rate (A 53).
When slow & fast motion recording is activated, the shooting frame rate is also
displayed (000/00.00P).
2: [Frame Rate]
C
Key lock (A 15). 1: [Key Lock]
00:00:00.00 / 00:00:00:00
R, P, F, E
Time code (A 85).
Time code status (A 86).
2: [Time Code]
Power supply level indicator 2: [Remaining Battery]
è
é
ê
ë
(in red)
000 min
Remaining battery charge of a BP-A30 or BP-A60 Battery Pack and estimated
remaining usage time (in minutes).
• When is displayed, replace the battery pack with a fully charged one.
• Depending on the conditions of use, the actual battery charge level may not be
indicated accurately or may not match the levels shown on the [B System
Setup] status screen or the indicators on the battery pack.
DC IN 00.0V Power supply voltage when using an AC adapter.
• When the voltage falls below the selected low-power warning level (A 196),
the voltage will be displayed in red.
Icon/Display Description Custom Display
60(24)fps,
60(30)fps
Video output (A 118). 2: [Output Terminals
Status]
U
Genlock (A 89). 2: [Genlock]
0000x0000 Resolution (A 53). 2: [Resolution/
Color Sampling]
YCC000 00 bit Color depth, color sampling (A 53).
7 (in green) Photo recorded on the SD card (A 42). 2: [Photo]
(in red) No SD card or cannot record photos on the SD card.
T
(in yellow) Output onscreen displays (A 145). 2: [OSD Output]
(in yellow) Record selected onscreen displays with primary clips (A 189). 2: [OSD Recording]
^ (in yellow) Magnification (A 75). 1: [Magnification]
J, K (in yellow) Peaking (A 75). 1: [Peaking]
Icon/Display Description Custom Display