Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Recording Video and Photos
48
Reviewing a Recording
You can review all or part of the last clip recorded even with the camera set to CAMERA mode.
1 Select > [
B
System Setup] > [Review
Recording] > Desired option.
2 After you finish recording a clip, press the
u
button.
• The last clip that was recorded is played back for the
selected duration. [
Ð
REVIEW] appears on the screen.
• There will be no sound from the built-in speaker but the
audio will be output from the × (headphone) terminal and
HDMI OUT terminal.
• You can use the joystick to jump back/forward within the
clip. You can also touch or slide the onscreen progress bar
to move to a different position in the video (A 133).
• Press CANCEL or flick down on the screen to stop
reviewing the clip.
• After the clip finishes playing back, or if you stop reviewing
the clip, the camera returns to record standby mode.
Options
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.
NOTES
NOTES
• If the camera switched cards during a recording, the camera will play back the clip on the card most recently
recorded on.
• You cannot review clips when continuous recording is activated.