Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
49
Adjusting Camera and Recording Settings
Adjusting Camera and Recording Settings
Using direct touch control, you can perform a variety of settings (camera, recording, assistance functions, etc.) in
CAMERA mode. White balance and exposure related settings can also be modified with the direct setting mode,
using the FUNC button.
Performing Basic Settings with Direct Touch Control
With direct touch control you can change commonly used settings such as camera and recording settings and
assistance functions. For details about each function, refer to the respective section on the manual.
Available Direct Touch Control Settings
1
Only when the main recording format is MP4.
2
Only when the [Continuous Recording] setting (A 109) is changed from [STBY] to [REC].
Turn on/off the Direct Touch Control Interface
Even when the direct touch control interface is displayed, you can still use other functions such as recording,
menu settings, direct setting mode or status screens.
1 Touch to open the direct touch control interface.
2Touch X to close the direct touch control interface.
Touch button Available settings
White balance White balance mode (preset, color temperature), color correction value.
ND filter Off, 3 different density settings.
Aperture Adjustment of the F value.
ISO/Gain Adjustment of ISO or gain value.
Shutter speed Adjustment of the value in the current shutter speed mode.
A (assistance functions) Focus guide (on/off), peaking (type), WFM, zebra (type), false color (on/off), markers (on/off), view assistance (on/
off).
Æ(recording settings) Recording mode, second card recording functions, continuous recording
1, 2
, slow & fast shooting frame rate,
frame recording, frame recording frame rate, interval recording, interval recording frame rate, interval recording
time interval, main recording format, / file selection, main resolution/bit rate, frame rate, recording
format, proxy recording color conversion, recording resolution/bit rate and recording frame rate.
Recording settings
Assistance functions
Opening ( )/ Closing (X) the
direct touch control interface
Camera settings