Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
69
Zoom
Using the Zoom Ring
The zoom speed depends on how fast you turn the zoom
ring.
1 Set the ZOOM switch to RING.
2 Turn the zoom ring to zoom.
• The zoom ratio is determined by the position of the
zoom ring.
NOTES
NOTES
• When you change the ZOOM switch's position from
ROCKER to RING, the camera will zoom automatically to
the focal length indicated by the current position of the
zoom ring.
• You can operate the zoom ring even when the camera's controls are locked (A 15).
Using the Zoom Rockers
Set the ZOOM switch to ROCKER to operate the zoom using one of the zoom rockers (grip/handle). You can
also use the RC-V100 Remote Controller or a commercially available remote control connected to the REMOTE
terminal.
Using the Grip Zoom Rocker
You can set the zoom speed of the grip zoom rocker using
the menu. With the [User Setting] you can even customize a
zoom speed pattern depending on how much you press on
the zoom rocker (A 70).
1 Set the ZOOM switch to ROCKER.
2 Move the zoom rocker toward T to zoom out
(wide-angle) and toward S to zoom in (telephoto).
Grip zoom rocker: Approximate zoom speeds (time required to zoom end-to-end)
* When the zoom speed is too fast, it will be more difficult to focus while zooming.
[v Camera Setup] > [v Camera Setup] > [Zoom Speed Level]
[Grip Zoom Speed] [Constant Speed] [Low] [Normal] [High]
[Constant]
[1] (slowest) 4 min 38 sec 2 min 1 min
[16] (fastest) 4.2 sec 2.6 sec 0.9 sec*
[Variable] – 4.2 sec – 4 min 38 sec 2.6 sec – 2 min 0.9 sec* – 1 min