Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
71
Zoom
Using the Handle Zoom Rocker
You can set the zoom speed of the handle zoom rocker using
the menu.
1 Set the ZOOM switch to ROCKER.
2 Move the zoom rocker toward
T to zoom out (wide-
angle) and toward
S to zoom in (telephoto).
Handle zoom rocker: Approximate zoom speeds (time required to zoom end-to-end)
* When the zoom speed is too fast, it will be more difficult to focus while zooming.
Setting the Zoom Speed (Handle Zoom Rocker)
1 Select > [
v
Camera Setup] > [Zoom Speed Level] > Desired option (A 70).
• The selected speed will also be applied to the handle zoom rocker.
2 Select > [
v
Camera Setup] > [Handle Zoom Speed] > Desired option.
Using a Remote Controller
You can operate the zoom using the RC-V100 Remote Controller or a commercially available remote control
connected to the camera. The zoom speeds will differ depending on the controller.
Zoom speeds for remote operation
NOTES
NOTES
• When an RC-V100 Remote Controller is connected to the camera, you can zoom with the remote controller’s
ZOOM dial. At default settings, turn the dial right to zoom in and left to zoom out.
[v Camera Setup] > [Handle Zoom Speed]
[v Camera Setup] > [Zoom Speed Level]
[Low] [Normal] [High]
[1] (slowest) 4 min 38 sec 2 min 1 min
[16] (fastest) 4.2 sec 2.6 sec 0.9 sec*
Accessory Zoom speed
RC-V100 Remote Controller (optional)
Variable speed: The greater the angle at which the RC-V100’s ZOOM dial is rotated from the center,
the faster the zoom.
Commercially available remote controls
If the remote control does not support variable zoom: Constant zoom speed.
If the remote control supports variable zoom: Variable zoom according to the remote control's
settings.
Browser Remote Fastest constant zoom speed. See the values under [16] in the previous table.