Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Recording Audio
92
1
Menu items under the [¡ Audio Setup] menu.
2
Changes to [INPUT Terminals (Camera)] when a commercially available accessory compatible with the multi-function shoe is
attached.
3
Only displayed when a commercially available accessory compatible with the multi-function shoe is attached.
NOTES
NOTES
• You can press the AUDIO STATUS button to display only
the [¡ Audio Setup] status screens. On these status
screens (A 201) you can check the input source
selected for each audio channel and other audio-related
settings.
Audio Format for MP4 Clips
Select the audio recording format for MP4 clips (primary clips or sub recording clips).
Select > [ÆRecording/Media Setup] > [Main Audio Format (MP4)] or [ Audio Format (MP4)]
> Desired option.
Recording Audio Using the Second Card Recording Functions
You can record audio in a lighter format as a WAV file by using the second card recording functions. The main
clip's 4-channel audio is converted into 1-channel audio at a lower audio quality.
1Insert an SD card into both card slots (A for the main clip, B for the audio file).
2 Select > [Æ Recording/Media Setup] > [Recording Mode] > [Normal Recording].
3 Select > [Æ Recording/Media Setup] > [2nd Card Rec Functions] > [ Main / Audio
Rec].
4Press the REC button to start recording.
• The main clip and the WAV file will be recorded simultaneously.
NOTES
NOTES
• About audio recorded using the second card recording functions.
- Audio is recorded with the following settings: 8 kHz, 16 bit, 1 channel.
- If video cannot be recorded due to a card problem, audio will also not be recorded.
- However, video will be recorded even if audio cannot be recorded due to a card problem.
[Built-in Mic] [Built-in Mic] –
Built-in microphone
(L)
Built-in microphone
(R)
Built-in microphone
(L)
Built-in microphone
(R)
[Built-in Mic]
[Multi-Function
Shoe]
3
–
Built-in microphone
(L)
Built-in microphone
(R)
Audio terminal
(commercially
available accessory)
Audio terminal
(commercially
available accessory)
Menu settings Recorded audio channels/audio sources
[Audio Input Selection]
1
[CH2 Input]
1
CH1 CH2 CH3 CH4
[CH1/CH2] [CH3/CH4]