Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
95
Recording Audio
Adjusting the Audio Recording Level
You can adjust the audio recording level of the INPUT terminals, MIC terminal or the built-in microphone. You can
select automatic or manual audio level adjustment, and adjust each audio channel separately or adjust CH1/
CH2 or CH3/CH4 together (when the audio level adjustment of the audio channels is linked, A 96). For the
built-in microphone, the adjustments of CH1 apply to both CH1/CH2.
Automatic Audio Level Adjustment for CH1, CH2 or CH1/CH2
Set the audio level switch of the desired channel to A (automatic) to let
the camera automatically adjust that channel’s audio level.
Manual Audio Level Adjustment for CH1, CH2 or CH1/CH2
You can set the audio level manually from – to +18 dB.
1 Set the audio level switch of the desired channel to M (manual).
2 Turn the corresponding audio level dial to adjust the audio level.
• For reference, the 0 corresponds to – , 5 corresponds to
0 dB, and 10 corresponds to +18 dB.
• As a guideline, adjust the audio recording level so that the audio
level meter on the screen will go to the right of the –18 dB mark
(one mark right of the –20 dB mark) only occasionally.
Audio Level Adjustment for CH3, CH4 or CH3/CH4
1 Select > [
¡
Audio Setup] > [Audio Rec Level CH3], [Audio Rec Level CH4] or [Audio Rec Level CH3/
CH4] > [Automatic] or [Manual].
• If you selected [Automatic], the rest of the procedure is not necessary. If you selected [Manual], continue the
procedure to set the audio recording level.
2Select > [
¡
Audio Setup] > [CH3 Level], [CH4 Level] or [CH3/CH4 Level] > Adjust the audio level as
needed.
• For reference, 0 corresponds to – , 50 corresponds to 0 dB, and 100 corresponds to +18 dB.
• As a guideline, adjust the audio recording level so that the audio level meter on the screen will go to the right
of the –18 dB mark (one mark right of the –20 dB mark) only occasionally.
CH1/CH2 audio level switches
CH1/CH2 audio level dials
CH1/CH2 audio level switches