User Manual

<Off>
<On>
<Register Log Dest to Addr Book>
Specify whether to disable registering destinations from fax send logs to the Address Book. Disabling
Destination Registr
ation from Logs to the Address Book(P. 413)
<Allow>
<Do Not Allow>
<TX Terminal ID>
Specify settings for adding the sender information, including the fax number and the name of the machine, to
the fax header. The r
ecipient can check who sent the fax by looking at the added information.
<Add TX Terminal ID>
<Off>
<On>
<Print Position>
<Inside Image Ar
ea>
<Outside Image Area>
<Mark Number As>
<Fax>
<Tel>
<Menu> <Function Settings> <Send> <Fax Settings> <TX Terminal ID> Select <On> in
<Add TX T
erminal ID>
Specify the settings <Apply>
<Print Position>
Species the position to print the terminal ID information in the sent fax. Select <Inside Image Ar
ea> to print
the information inside the image area, or <Outside Image Area> to print the information outside the image
area.
<Mark Number As>
Adds the "Fax" or "Tel" mark in front of the fax number registered for the machine (
Registering the Fax
Number and Unit Name(P. 81) ). Select <Tel> to indicate that the notied number is a telephone number.
<Auto Adjust VoIP Comm. Speed>
When you want to perform a successful fax communication with a partner device or on a line with which errors
tend to occur easily
, you can use this function to reduce communication errors.
<Off>
<On>
Setting Menu List
534