User Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Logging in to the Machine
- Placing Originals
- Loading Paper
- Loading Paper in the Paper Drawer
- Loading Paper in the Multi-Purpose Tray
- Loading Envelopes
- Loading Preprinted Paper
- Specifying Paper Size and Type
- Specifying Paper Size and Type in the Paper Drawer
- Specifying Paper Size and Type in the Multi-Purpose Tray
- Registering Default Paper Settings for the Multi-Purpose Tray
- Registering a Custom Paper Size
- Limiting the Paper Sizes Displayed
- Automatically Selecting an Appropriate Paper Source for Each Function
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Sleep Mode
- Registering Destinations
- Using a USB Memory Device
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting (FAQ)
- Appendix
- SIL OPEN FONT LICENSE
Select the authentication protocol version. Select either [NTLMv1] or [NTLMv2], according to the destination
SMB server. Y
ou can also select both.
[Require SMB Signature for Connection]
Select the check box to request an SMB packet signature when connecting to an SMB server.
[Require Encryption for Connection]
Select the check box to request a connection with SMB v3.0 encrypted communication when connecting to an
SMB server.
[Timeout]
Set the time until the SMB connection destination responds.
● When sending to an SMB server, the network connection was lost or the response on the server side was
slow, causing a wait time timeout on the machine side before the data could be sent or forwarding could
be completed. If this happens, you may be able to avoid a timeout by increasing the wait time.
6
Click [OK].
Specify the Version of SMB Client
Specify the version of SMB to use with the SMB client.
1
Start the Remote UI and log in to System Manager Mode.
Starting Remote
UI(P
. 420)
2
Click [Settings/Registration] on the Portal page.
Remote UI Screen(P. 421)
3
Select [Network Settings] [Specied SMB Client V
ersions].
4
Click [Edit].
5
Select the check box for the version of SMB to use with the SMB client.
6
Click [OK].
● If you select the [Requir
e Encryption for Connection] check box, the machine can only connect to SMB
servers that support SMB v3.0 encrypted communication. When the [1.0] and [2.0] check box is selected for
[Specied SMB Client Versions] but [3.0] check box is not selected, the machine cannot connect to SMB
servers that do not support SMB v3.0 encrypted communication.
● Use the same version of SMB with the SMB server and SMB client. SMB cannot be used if the versions differ.
LINKS
Setting Up
61