INSTRUCTION MANUAL E E The “Software Start Guide” and “Quick Reference Guide” are provided at end of this manual.
Introduction The EOS REBEL T3i/EOS 600D is a high-performance, digital singlelens reflex camera featuring a fine-detail CMOS sensor with approx. 18.0 effective megapixels, DIGIC 4, high-precision and high-speed 9point AF, approx. 3.7 fps continuous shooting, Live View shooting, and Full High-Definition (Full HD) movie shooting. The camera is highly responsive for shooting at anytime, provides many functions fitted for advanced shooting, and offers many other features.
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Wide Strap EW-100DB III EOS DIGITAL Solution Disk (Software CD-ROM) Battery Pack LP-E8 (with protective cover) Interface cable Software Instruction Manual (CD-ROM) Battery Charger LC-E8/LC-E8E* Stereo AV Cable AVC-DC400ST Camera Instruction Manual (this booklet) * Battery Charger LC-E8 or LC-E8E is provided.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicates the cross keys. <0> : Indicates the setting button. 0, 9, 7, 8 : Indicates that the respective function remains active for 4 sec., 6 sec., 10 sec., or 16 sec. respectively after you let go of the button. * In this manual, the icons and markings indicating the camera’s buttons, dials, and settings correspond to the icons and markings on the camera and on the LCD monitor.
Chapters For first-time DSLR users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures.
Contents at a Glance Shooting Shoot automatically Î p.49 - 63 (Basic Zone modes) Shoot continuously Î p.88 (i Continuous shooting) Take a picture of yourself in a group Î p.89 (j Self-timer) Freeze the action Blur the action Î p.94 (s Shutter-priority AE) Blur the background Î p.56 (C Creative Auto) Keep the background in sharp focus p.96 (f Aperture-priority AE) Adjust the image brightness (exposure) Î p.103 (Exposure compensation) Shoot in low light Î p.
Take many pictures Î p.76 (7a, 8a, b, c) Focusing Change the point of focus Î p.85 (S AF point selection) Shoot a moving subject Î p.62, 84 (AI Servo AF) Playback View the images with the camera Î p.71 (x Playback) Search for pictures quickly Î p.202 (H Index display) p.203 (I Image browsing) Rate images Î p.206 (Ratings) Prevent important images from accidental deletion Î p.222 (K Image protect) Delete unnecessary images Î p.224 (L Delete) Auto play images and movies Î p.
Index to Features Power Battery • Charging • Installing/Removing • Battery check Power outlet Auto power off Image Quality Î p.26 Î p.28 Î p.33 Î p.260 Î p.32 Card Inserting/Removing Î p.29 Format Î p.45 Release shutter without card Î p.166 Lens Attaching/Detaching Zoom Image Stabilizer AF Î p.36 Î p.37 Î p.38 Basic Settings Dioptric adjustment Language Date/Time Beeper Using the LCD monitor LCD Off/On LCD brightness adjustment 8 AF mode AF point selection Manual focusing Î p.
Index to Features Mirror lockup Automatic Depth-of-field AE Metering mode Remote control Î p.122 Î p.101 Î p.102 Î p.261 Exposure Adjustments Exposure compensation Î p.103 AEB Î p.105 AE lock Î p.107 Flash Built-in flash • Flash exposure compensation • FE lock External flash Flash control • Wireless flash Î p.90 Î p.104 Î p.108 Î p.263 Î p.180 Î p.
Contents Introduction 2 tem Check List.................................................................................................. 3 Conventions Used in this Manual ...................................................................... 4 Chapters ............................................................................................................ 5 Contents at a Glance......................................................................................... 6 Index to Features ................
Contents 3 Creative Shooting 4 Advanced Shooting 5 73 d: Program AE................................................................................................74 Setting the Image-recording Quality.................................................................76 Z: Changing the ISO Speed .........................................................................79 A Selecting the Subject’s Optimal Image Characteristics (Picture Style) ....81 E: Changing the Autofocus Mode (AF Mode) ..............
Contents 6 Shooting Movies 7 Handy Features 8 Wireless Flash Photography 9 Image Playback 12 141 k Shooting Movies...................................................................................... 142 Shooting Function Settings ........................................................................... 149 Setting the Movie-recording Size................................................................... 150 Using Movie Digital Zoom.............................................................
Contents k Playing Movies.........................................................................................212 X Editing a Movie’s First and Last Scenes ...................................................214 Slide Show (Auto Playback)...........................................................................215 Viewing the Images on TV .............................................................................218 K Protecting Images ..................................................................
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Handling Precautions LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Quick Start Guide Insert the battery. (p.28) 1 To charge the battery, see page 26. Insert a card. (p.29) 2 3 With the card’s label facing toward the camera back, insert it into the slot. White index Red index Attach the lens. (p.36) Align the lens’ white or red index with the camera’s index in the matching color. 4 Set the lens focus mode switch to . (p.36) 5 Set the power switch to <1>, and set the Mode Dial to (Scene Intelligent Auto). (p.
Quick Start Guide 6 Flip out the LCD monitor. (p.31) When the LCD monitor displays the date/time setting screen, see page 34. 7 Focus the subject. (p.40) 8 Take the picture. (p.40) 9 Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus the subject. If necessary, the built-in flash will pop-up automatically. Press the shutter button completely to take the picture. Review the picture. (p.
Nomenclature The names in bold indicate the parts mentioned up until the “Basic Shooting and Image Playback” section. Power switch (p.32) Mode Dial (p.22) Built-in flash/AF-assist beam (p.90/86) Display button (p.47,152,167,179) EF Lens mount index (p.36) EF-S Lens mount index (p.36) ISO speed setting button (p.79) Flash-sync contacts Hot shoe (p.263) <6> Main Dial Focal plane mark (p.61) Shutter button (p.40) Strap mount (p.25) Red-eye reduction/ Self-timer lamp (p.
Nomenclature Eyecup (p.262) Dioptric adjustment knob (p.39) Live View shooting/ Movie shooting button (p.124/142) Viewfinder eyepiece AE lock/ FE lock button/ Index/Reduce button (p.107/108/202/204,243) Info button (p.47,71,126,146,175) AF point selection/ Magnify button (p.85/204,243) Menu button (p.43) Speaker (p.212) LCD monitor (p.31,43,167) Card slot cover (p.29) DC cord hole (p.260) Aperture/ Exposure compensation button (p.99/103) Access lamp (p.
Nomenclature Shooting Settings Display (in Creative Zone modes, p.22) Shutter speed Exposure level indicator Exposure compensation amount (p.103) AEB range (p.105) Aperture c Main Dial pointer (p.93) Auto Lighting Optimizer (p.109) ISO speed (p.79) Shooting mode Highlight tone priority (p.254) Picture Style (p.81) AF mode (p.83) X One-Shot AF 9 AI Focus AF Z AI Servo AF g Manual Focusing y Flash exposure compensation (p.104) 0 External flash exposure compensation Built-in flash func. setting*1 (p.
Nomenclature Viewfinder Information Spot metering circle AF point activation indicator < > AF points Focusing screen ISO speed <2> White balance correction AE lock/ AEB in-progress Focus confirmation light Max.
Nomenclature Mode Dial The Mode Dial includes the Basic Zone modes, Creative Zone modes, and the Movie shooting mode. Creative Zone These modes give you more control for shooting various subjects. d : Program AE (p.74) s : Shutter-priority AE (p.94) f : Aperture-priority AE (p.96) a : Manual exposure (p.99) 8: Automatic depth-of-field AE (p.101) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject. A : Scene Intelligent Auto (p.50) 7 : Flash Off (p.
Nomenclature Lens Lens without a distance scale Focusing ring (p.87,138) Focus mode switch (p.36) Zoom ring (p.37) Hood mount (p.294) Zoom position index (p.37) Filter thread (front of lens) (p.294) Image Stabilizer switch (p.38) Contacts (p.15) Lens mount index (p.36) Lens with a distance scale Hood mount (p.294) Focus mode switch (p.36) Zoom position index (p.37) Distance scale Filter thread (front of lens) (p.294) Zoom ring (p.37) Focusing ring (p.87,138) Image Stabilizer switch (p.
Nomenclature Battery Charger LC-E8 Charger for Battery Pack LP-E8 (p.26). Power plug Battery pack slot Charge lamp Full-charge lamp Battery Charger LC-E8E Charger for Battery Pack LP-E8 (p.26).
Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is also attached to the strap (p.262).
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E8 the battery. 3 Recharge For LC-E8 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Recharge the battery before using. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its power. After recharging the battery, detach it and unplug the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery Installing the Battery Load a fully charged Battery Pack LP-E8 into the camera. 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery. 2 Insert Insert the end with the battery contacts. Insert the battery until it locks in place. the cover. 3 Close Press the cover until it snaps shut. Removing the Battery Open the cover and remove the battery. Press the battery release lever as shown by the arrow and remove the battery.
Installing and Removing the Card The card (sold separately) can be an SD, SDHC, or SDXC memory card. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing/erasing. Installing the Card 1 Write-protect switch Open the cover. Slide the cover as shown by the arrows to open it. the card. 2 Insert As shown by the illustration, face the card’s label side toward you and insert it until it clicks in place. the cover.
Installing and Removing the Card Removing the Card 1 Open the cover. Set the power switch to <2>. Make sure the access lamp is off, then open the cover. If “Recording ...” is displayed, close the cover. Access lamp the card. 2 Remove Gently push in the card, then let go. The card will stick out. Pull the card straight out, then close the cover.
Using the LCD Monitor After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, and playback images and movies. You can change the direction and angle of the LCD monitor. 1 Flip out the LCD monitor. the LCD monitor. 2 Rotate When the LCD monitor is swung out, 180° 90° 175° you can rotate it up or down or face it forward toward the subject. The indicated angle is only approximate. it toward you. 3 Face Normally, face the LCD monitor toward you.
Turning on the Power If you turn on the power switch and the date/time setting screen appears, see page 34 to set the date/time. <1> : The camera turns on. <2> : The camera is turned off and does not operate. Set to this position when not using the camera. About the Automatic Self-Cleaning Sensor Whenever you set the power switch to <1> or <2>, the sensor cleaning will be executed automatically. During the sensor cleaning, the LCD monitor will display .
Turning on the Power z Checking the Battery Level When the power switch is set to <1>, the battery level will be indicated in one of four levels: z : Battery level is OK. x : Battery level is low, but still enough for now. c : Battery will be exhausted soon. (Blinks) n : Battery must be recharged. Battery Life Temperature At 23°C / 73°F At 0°C / 32°F No Flash Approx. 550 shots Approx. 470 shots 50% Flash Use Approx. 440 shots Approx.
3 Setting the Date and Time When you turn on the power for the first time or if the date/time has been reset, the Date/Time setting screen will appear. Follow steps 3 and 4 to set the date/time. Note that the date/time appended to recorded images will be based on this date/time setting. Be sure to set the correct date/time. 1 Display the menu screen. Press the button to display the menu screen. the [6] tab, select [Date/ 2 Under Time]. Press the key to select the [6] tab.
3 Selecting the Interface Language 1 Display the menu screen. Press the button to display the menu screen. the [6] tab, select 2 Under [LanguageK]. Press the key to select the [6] tab. Press the key to select [LanguageK] (the fourth item from the top), then press <0>. the desired language. 3 Set Press the key to select the language, then press <0>. The interface language will change.
Attaching and Detaching a Lens Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’ red or white index with White index the camera’s index matching the same color. Turn the lens as shown by the arrow until it snaps in place. Red index the lens, set the focus mode 3 On switch to (autofocus). If it is set to (manual focus), autofocus will not operate. 4 Remove the front lens cap.
Attaching and Detaching a Lens About Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision.
About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a sharper shot. The procedure explained here is based on the EF-S18-55mm f/3.5-5.6 IS II lens as an example. * IS stands for Image Stabilizer. 1 Set the IS switch to <1>. Set also the camera’s power switch to <1>. the shutter button halfway. 2 Press The Image Stabilizer will operate. the picture.
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right until the nine AF points in the viewfinder look sharp. If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting Vertical shooting 1.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder (0). While you press the shutter button halfway, the LCD monitor will turn off (p.179).
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor. This is called the Quick Control screen. 1 Press the button. The Quick Control screen will appear (7). the desired function. 2 Set Press the key to select the function to be set. The selected function and Feature guide (p.48) will appear. Turn the <6> dial to change the setting. Basic Zone modes Creative Zone modes the picture.
Q Quick Control for Shooting Functions Settable Functions on Quick Control Screen White balance correction* (p.119) Shutter speed (p 94) Aperture (p.96) Highlight tone priority* (p.254) Shooting mode* (p.22) Exposure compensation/ AEB setting (p.103, 105) ISO speed (p.79) Flash exposure compensation (p.104) Picture Style (p.81) Built-in flash function Image-recording quality (p.76) AF mode (p.83) White balance (p.117) Auto Lighting Optimizer (p.109) Drive mode (p.88, 89) Metering mode (p.
3 Menu Operations With menus, you can set various functions such as the image-recording quality, date/time, etc. While looking at the LCD monitor, use the button, cross keys, and <0> button on the camera back to operate the menus. button <0> button LCD monitor Cross keys Menu Screen In the Basic Zone, Movie shooting mode, and Creative Zone, the tabs and menu options displayed will be different.
3 Menu Operations Menu Setting Procedure 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Press the key to select a menu tab. the desired item. 3 Select Press the key to select the item, then press <0>. the setting. 4 Select Press the or key to select the desired setting. (Some settings require you to press either the or key to select it.) The current setting is indicated in blue. the desired setting.
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a computer, etc., before formatting the card. 1 Select [Format]. Under the [5] tab, select [Format], then press <0>. the card. 2 Format Select [OK], then press <0>.
3 Formatting the Card Execute [Format] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed (p.287). About Low-level Formatting Do low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase all data in the card.
Switching the LCD Monitor Display The LCD monitor can display the shooting settings screen, menu screen, captured images, etc. Shooting Settings When you turn on the power switch, the shooting settings will be displayed. When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on. You can also turn off the display by pressing the button. Press the button again to turn on the display.
Feature Guide The Feature guide is a simple description of the respective function or option. It is displayed when you change the shooting mode or use the Quick Control screen to set a shooting function, Live View shooting, movie shooting, or playback. When you select a function or option on the Quick Control screen, the Feature guide description is displayed. The Feature guide turns off when you further proceed with any operation.
Basic Shooting and Image Playback This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to playback images. With Basic Zone modes, all you do is point and shoot and the camera sets everything automatically (p.64, 268). Also, to prevent botched pictures due to mistaken operations, major shooting settings cannot be changed in fully-automatic modes. Ba sic Z one About the Auto Lighting Optimizer In Basic Zone modes, the Auto Lighting Optimizer (p.
A Fully Automatic Shooting (Scene Intelligent Auto) The camera analyzes the scene and sets the optimum settings automatically. It is a fully-automatic mode. Even with moving subjects, the camera will automatically continue to focus the subject (p.53). 1 AF point Set the Mode Dial to . any AF point over the 2 Aim subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier. the subject.
A Fully Automatic Shooting (Scene Intelligent Auto) the picture. 4 Take Press the shutter button completely to take the picture. The captured image will be displayed for approx. 2 sec. on the LCD monitor. If the built-in flash has popped up, you can push it back down with your fingers. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes. If the desired color tone is not obtained, use a Creative Zone mode and select a suitable Picture Style (p.81).
A Fully Automatic Shooting (Scene Intelligent Auto) Although it is daylight, the flash popped up. For a backlit subject, the flash may pop up to help lighten the subject’s dark areas. In low light, the built-in flash fired a series of flashes. Pressing the shutter button halfway may trigger the built-in flash to fire a series of flashes to assist autofocusing. This is called AF-assist beam. Its effective range is about 4 meters/13.1 feet. Although flash was used, the picture came out dark.
A Full Auto (Scene Intelligent Auto) Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the (Scene Intelligent Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture. This is called “focus lock”.
A Full Auto (Scene Intelligent Auto) Techniques A Live View Shooting Live View shooting allows you to shoot while looking at the image on the LCD monitor. For details, see page 123. 1 Display the Live View image on the LCD monitor. Press the button. The Live View image will appear on the LCD monitor. the subject. 2 Focus Aim the center AF point < > on the subject. Press the shutter button halfway to focus. When focus is achieved, the AF point will turn green and the beeper will sound.
7 Disabling Flash In places where flash photography is prohibited, use the <7> (Flash Off) mode. This mode is also effective for capturing the particular ambience of a scene, such as candlelight scenes. Shooting Tips Prevent camera shake if the numeric display in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
C Creative Auto Shooting Unlike the Scene Intelligent Auto mode where the camera sets everything, the Creative Auto mode enables you to easily change the depth of field, drive mode, and flash firing. You can also choose the ambience you want to convey in your images. The default settings are the same as the mode. * CA stands for Creative Auto. 1 Set the Mode Dial to . the button. (7) 2 Press The Quick Control screen will appear. the desired function.
C Creative Auto Shooting (1) Shutter speed Aperture ISO speed (2) (3) Battery check Possible shots Image-recording quality Pressing the button enables you to set the following: (1) Shoot by ambience selection You can set the ambience you want to convey in your images. Press the key or turn the <6> dial to select the desired ambience. You can also select it from a list by pressing <0>. For details, see page 65.
C Creative Auto Shooting (3) Drive mode/Flash firing When you press <0>, the drive mode or flash firing setting screen will appear. Set as desired, then press <0> to finalize the setting and return to the Quick Control screen. Drive mode: Press the key or turn the <6> dial to set it as desired. Single shooting : Shoot one image at a time. Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to about 3.7 shots per sec.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and the hair look softer. Shooting Tips The further the distance between the subject and background, the better. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better in front of a plain, dark background. Use a telephoto lens.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes. Shooting night scenes.
4 Shooting Close-ups When you want to photograph flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes the flower, etc., stand out better. Move to the subject as close as possible. Check the lens for its minimum focusing distance. Some lenses have indications such as <40.25m/0.8ft>.
5 Shooting Moving Subjects To photograph a moving subject, whether it is a child running or a moving vehicle, use the <5> (Sports) mode. Shooting Tips Use a telephoto lens. Using a telephoto lens is recommended so you can shoot from afar. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus confirmation light will blink.
6 Shooting Portraits at Night To shoot someone at night and obtain a natural-looking exposure in the background, use the <6> (Night Portrait) mode. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. Keep the person within 5 meters/16.4 feet from the camera. Under low light, the built-in flash will fire automatically to obtain a good exposure of the person.
Q Quick Control Example: Portrait mode In Basic Zone modes when the shooting settings screen is displayed, you can press the button to display the Quick Control screen. The table below indicates the functions that can be set with the Quick Control screen in each Basic Zone mode. 1 Set the Mode Dial to a Basic Zone mode. 2 Press the button. (7) The Quick Control screen will appear. 3 Set the function. Press the key to select a function. (Step not necessary in the A/7 mode.
Shoot by Ambience Selection Except in the (Scene Intelligent Auto) and <7> (Flash Off) Basic Zone modes, you can select the ambience for shooting.
Shoot by Ambience Selection the ambience effect. 4 Set Press the key to select the effect bar so that [Effect] appears at the bottom. Press the key or turn the <6> dial to select the desired effect. the picture. 5 Take To shoot while the Live View image is displayed, press the shutter button. To return to viewfinder shooting, press the button to exit Live View shooting. Then press the shutter button completely to take the picture.
Shoot by Ambience Selection Ambience Settings (1) Standard setting Standard image characteristics for the respective shooting mode. Note that <2> has image characteristics geared for portraits and <3> is geared for landscapes. Each ambience is a modification of the respective shooting mode’s image characteristics. (2) Vivid The subject will look sharp and vivid. It makes the photo look more impressive than with [Standard setting]. (3) Soft The subject will look softer and more dainty.
Shoot by Lighting or Scene Type In the <2> (Portrait), <3> (Landscape), <4> (Close-up), and <5> (Sports) Basic Zone modes, you can shoot while the settings match the lighting or scene type. Normally, [Default setting] is adequate, but if the settings match the lighting condition or scene, the picture will look more accurate to your eye. For Live View shooting, if you set both [Shoot by lighting or scene type] and [Shoot by ambience selection] (p.65), you should first set [Shoot by lighting or scene type].
Shoot by Lighting or Scene Type the Quick Control screen, 3 On select the lighting or scene type. Press the button (7). Press the key to select [Default setting] (shown in the sample screen). [Shoot by lighting or scene type] will appear on the screen’s bottom. Press the key or turn the <6> dial to select the desired lighting or scene type. The LCD monitor will show how the image will look with the selected lighting or scene type. the picture.
Shoot by Lighting or Scene Type Lighting or Scene Type Settings (1) Default setting The default setting. (2) Daylight For subjects under sunlight. Gives more natural-looking blue skies and greenery and reproduces light-colored flowers better. (3) Shade For subjects in the shade. Suitable for skin tones, which may look too bluish, and for light-colored flowers. (4) Cloudy For subjects under overcast skies. Makes skin tones and landscapes, which may otherwise look dull on a cloudy day, look warmer.
x Image Playback The easiest way to playback images is explained below. For more details on the playback procedure, see page 201. 1 Playback the image. When you press the button, the last image captured will be displayed. an image. 2 Select To view images starting with the last image, press the key. To view images starting with the first (oldest) image, press the key. Each time you press the button, the display format will change.
Creative Shooting In the Basic Zone modes, to prevent spoiled shots, most functions are set automatically and cannot be changed. In the (Program AE) mode, you can set various functions and be more creative. In the mode, the camera sets the shutter speed and aperture automatically to obtain a standard exposure. The difference between the Basic Zone modes and is explained on page 268.
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. 1 Set the Mode Dial to . the subject. 2 Focus Look through the viewfinder and aim the selected AF point over the subject. Then press the shutter button halfway. The dot inside the AF point achieving focus lights briefly in red, and the focus confirmation light in the viewfinder’s bottom right lights (with One Shot AF).
d: Program AE Shooting Tips Change the ISO speed or use the built-in flash. To match the subject and ambient lighting level, you can change the ISO speed (p.79) or use the built-in flash (p.90). In the mode, the built-in flash will not fire automatically. So under low light, press the (Flash) button to raise the built-in flash. The program can be shifted.
3 Setting the Image-recording Quality You can select the pixel count and the image quality. Ten imagerecording quality settings are provided: 73, 83, 74, 84, 7a, 8a, b, c, 1, 1+73. 1 Pixel count Possible shots Select [Quality]. Under the [1] tab, select [Quality], then press <0>. [Quality] will appear. the image-recording 2 Select quality. The respective quality’s pixel count and number of poss ble shots will be displayed to help you select the desired quality. Then press <0>.
3 Setting the Image-recording Quality FAQ I want to select the image-recording quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A2 (42x59.4cm/16.5x23.4in.) you want to crop the image, selecting a 73 higher quality (more pixels) such as 73, 83 A3 (42x29.7cm/ 83, 1, or 1+73 is recommended. 1 16.5x11.7in.) 1+73 b is suitable for playing the images on a 74 84 7a digital photo frame.
3 Setting the Image-recording Quality About 1 1 is the raw image data before it is made into 73 or other images. Although 1 images require software like Digital Photo Professional (provided, p.302) so they can be displayed on the computer, they also offer flex bility for image adjustments possible only with 1. 1 is effective when you want to precisely adjust the image yourself or shoot an important subject. About 1+73 1+73 records both a 1 and 73 image with a single shot.
Z: Changing the ISO SpeedN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically (p.80). 1 Press the button. (9) [ISO speed] will appear. the ISO speed. 2 Set Press the key or turn the <6> dial to select the desired ISO speed, then press <0>. You can also set the ISO speed in the viewfinder while turning the <6> dial. With [AUTO] selected, the ISO speed will be set automatically (p.80).
Z: Changing the ISO SpeedN ISO [AUTO] If the ISO speed is set to [AUTO], the actual ISO speed to be set will be displayed when you press the shutter button halfway. As indicated below, the ISO speed will be set automatically to suit the shooting mode. Shooting Mode ISO Speed Setting A/7/C/3/4/5/6 Automatically set within ISO 100 - 3200 d/s/f/a*1/8 Automatically set within ISO 100 - 6400*2 2 Fixed at ISO 100 With flash Fixed at ISO 400*3*4 *1: *2: *3: *4: Fixed at ISO 400 for bulb exposures.
A Selecting the Subject’s Optimal Image CharacteristicsN By selecting a Picture Style, you can obtain image characteristics matching your photographic expression or the subject. In Basic Zone modes, you cannot select the Picture Style. 1 Press the button. [Picture Style] will appear. a Picture Style. 2 Select Press the key or turn the <6> dial to select a Picture Style, then press <0>. Picture Style Characteristics D Auto The color tone will be adjusted to suit the scene.
A Selecting the Subject’s Optimal Image CharacteristicsN R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. S Neutral This Picture Style is for users who prefer to process images with their computer. For natural colors and subdued images. U Faithful This Picture Style is for users who prefer to process images with their computer.
E: Changing the Autofocus ModeN You can select the AF (autofocus) mode to suit the shooting conditions or subject. In Basic Zone modes, the most suitable AF mode is set automatically. 1 On the lens, set the focus mode switch to . the button. 2 Press [AF mode] will appear. the AF mode. 3 Select Press the key or turn the <6> dial to select the desired AF mode, then press <0>. the subject. 4 Focus Aim the AF point over the subject and press the shutter button halfway.
E: Changing the Autofocus ModeN If focus cannot be achieved, the focus confirmation light in the viewfinder will blink. If this occurs, a picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try to focus again. Or see “Subjects Difficult to Focus” (p.87). If [1 Beep] is set to [Disable], he beeper will not sound when focus is achieved. AI Servo AF for Moving Subjects This AF mode is for moving subjects when the focusing distance keeps changing.
S Selecting the AF Point N In Basic Zone modes, the camera will normally focus the closest subject automatically. Therefore, it might not always focus your target subject. In the , , , and modes, you can select the AF point and use it to focus the target subject. 1 Press the button. (9) The selected AF point will be displayed on the LCD monitor and in the viewfinder. the AF point. 2 Select Press the key to select the AF point.
S Selecting the AF Point N Shooting Tips When shooting a portrait up close, use One-Shot AF and focus the eyes. If you focus the eyes first, you can then recompose and the face will remain sharp. If it is difficult to focus, select and use the center AF point. The center AF point is the most sensitive among the nine AF points. To make it easier to focus a moving subject, set the camera to automatic AF point selection and AI Servo AF (p.84). The center AF point will first be used to focus the subject.
Subjects Difficult to Focus Autofocus can fail to achieve focus (viewfinder’s focus confirmation light blinks) with certain subjects such as the following: Very low-contrast subjects. (Example: Blue sky, solid-color walls, etc.) Subjects in very low light Extremely backlit or reflective subjects (Example: Car with a highly reflective body, etc.) Near and far subjects covered by an AF point (Example: Animal in a cage, etc.
i Continuous ShootingN You can shoot up to about 3.7 shots per sec. This is effective for shooting a child running toward you or capturing different facial expressions. 1 Press the button. . 2 Select Press the key or turn the <6> dial to select continuous shooting , then press <0>. the picture. 3 Take The camera shoots continuously while you hold down the shutter button completely. Shooting Tips Also set the AF mode (p.83) matching the subject.
j Using the Self-timer 1 Press the button. the self-timer. 2 Select Press the key or turn the <6> dial to select the desired selftimer, then press <0>. Q : 10-sec. self-timer The remote control can also be used. (p.261) l : 2-sec. self-timerN (p.122) q : 10-sec. self-timer plus continuous shots Press the key to set the number of continuous shots (2 to 10) to be taken wi h the self-timer. the picture.
D Using the Built-in Flash In indoors, low light, or backlit conditions in daylight, just raise the builtin flash and press the shutter button to take flash pictures. In the mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Press the button. In Creative Zone modes, you can press the button anytime to take flash pictures. While the flash is recycling, “DbuSY” is displayed in the viewfinder, and [BUSYD] is displayed on the LCD monitor.
D Using the Built-in Flash Shooting Tips If the subject is far away, increase the ISO speed (p.79). By increasing the ISO speed, you can extend the flash range. In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. Detach the lens hood and keep at least 1 meter/3.3 feet away from the subject. If the lens has a hood attached or you are too close to the subject, the bottom of the picture might look dark due to the obstructed flash.
Advanced Shooting This chapter builds on Chapter 3 and introduces more ways to shoot creatively. The first half of this chapter explains how to use the , , , and <8> modes on the Mode Dial. All the functions explained in Chapter 3 can also be used in the , , and modes. To see which functions can be used in each shooting mode, see page 268. The M mark shown on the right of the page title indicates that the function is available only in Creative Zone modes (p.22).
s: Action Shots You can either freeze the action or create motion blur with the (Shutter-priority AE) mode on the Mode Dial. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) 1 Frozen action (Fast shutter speed: 1/2000 sec.) Set the Mode Dial to . the desired shutter speed. 2 Set See “Shooting Tips” for advice on setting the shutter speed. Turning the <6> dial to the right sets a faster shutter speed, and turning it to the left sets a slower one. the picture.
s: Action Shots Shooting Tips To freeze the action or moving subject. Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. To blur a running child or animal giving the impression of fast movement. Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow the moving subject through the viewfinder and press the shutter button to take the picture. If you use a telephoto lens, hold it steady to prevent camera shake. How to blur a flowing river or water fountain.
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, set the Mode Dial to (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * stands for Aperture value which is the size of the diaphragm hole inside the lens. Blurred background (With a low aperture f/number: f/5.6) 1 Sharp foreground and background (With a high aperture f/number: f/32) Set the Mode Dial to . the desired aperture.
f: Changing the Depth of Field Shooting Tips When using an aperture with a high f/number, note that camera shake can occur in low light scenes. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec. In such cases, increase the ISO speed and hold the camera steady or use a tripod. The depth of field depends not only on the aperture, but also on the lens and on the subject distance.
f: Changing the Depth of Field D Using the Built-in Flash To obtain a correct flash exposure, the flash output will be set automatically to match the set aperture (autoflash exposure). The shutter speed will be set automatically between 1/200 sec. - 30 sec. to suit the scene’s brightness. In low light, the main subject is exposed with the automatic flash, and the background is exposed with a slow shutter speed set automatically.
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * stands for Manual. 1 Set the Mode Dial to . the shutter speed and 2 Set aperture. <6> + <6> Standard exposure index Exposure level mark To set the shutter speed, turn the <6> dial. To set the aperture, hold down the button and turn the <6> dial.
a: Manual Exposure I Using the Built-in Flash To obtain a correct flash exposure, the flash output will be set automatically (autoflash exposure) to match the manually-set aperture. The flash sync speed can be set from 1/200 sec. to 30 sec. and bu b. BULB: Bulb Exposures A bulb exposure keeps the shutter open for as long as you hold down the shutter button. It can be used to photograph fireworks, etc. In step 2 on the preceding page, turn the <6> dial to the left to set .
8: Automatic Depth-of-Field AE Objects in the foreground and background will be in focus automatically. All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically. * <8> stands for Auto-Depth of field. This mode sets the depth of field automatically. 1 Set the Mode Dial to <8>. the subject. 2 Focus Aim the AF points over the subjects and press the shutter button halfway (0).
q Changing the Metering ModeN Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. 1 Select [Metering mode]. Under the [2] tab, select [Metering mode], then press <0>. the metering mode. 2 Set Select the desired metering mode, then press <0>. q Evaluative metering This is an all-around metering mode suited for portraits and even backlit subjects.
Setting Exposure CompensationN O Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes (except ). You can set the exposure compensation up to ±5 stops in 1/3-stop increments. Increased exposure for a brighter image Decreased exposure for a darker image Dark exposure Making it brighter: Hold down the button and turn the <6> dial to the right.
Setting Exposure CompensationN y Flash Exposure Compensation Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1 Press the button. (7) The Quick Control screen will appear (p.41). [y]. 2 Select Press the key to select [y*]. [Flash exposure comp.] will be displayed at the bottom. the flash exposure 3 Set compensation amount.
3 Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically (up to ±2 stops in 1/3-stop increments) with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure (Decreased exposure) 1 Brighter exposure (Increased exposure) Select [Expo. comp./AEB]. Under the [2] tab, select [Expo. comp./AEB], then press <0>. the AEB amount.
3 Auto Exposure BracketingN Canceling AEB Follow steps 1 and 2 to turn off the AEB amount display. The AEB setting will also be canceled automatically if the power switch is set to <2>, flash recycling is completed, etc. Shooting Tips Using AEB with continuous shooting: If continuous shooting (p.88) has been set and you press the shutter button completely, the three bracketed shots will be taken continuously in this sequence: Standard exposure, decreased exposure, and increased exposure.
A Locking the ExposureN You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the shot. This is called AE lock. It is effective for backlit subjects. 1 Focus the subject. Press the shutter button halfway. The exposure setting will be displayed. the button.
A Locking the Flash ExposureN If the subject is on the side of the frame and you use flash, the subject may turn out to be too bright or dark depending on the background, etc. This is when you should use FE lock. After setting the proper flash exposure for the subject, you can recompose (put the subject toward the side) and shoot. This feature can also be used with a Canon EXseries Speedlite. * FE stands for Flash Exposure. 1 Spot metering circle Press the button. The built-in flash will rise.
3 Correcting the Brightness and Contrast AutomaticallyN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This feature is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is done when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (provided software, p.302). 1 Select [Auto Lighting Optimizer].
3 Correcting the Image’s Dark Corners Due to the lens characteristics, the four corners of the picture might look darker. This phenomenon is called lens light fall-off or drop in peripheral illumination and can be corrected automatically. The default setting is [Enable]. With JPEG images, the correction is done when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (provided software, p.302). 1 Select [Peripheral illumin. correct.].
3 Correcting the Image’s Dark Corners About the Lens Correction Data The camera already contains lens peripheral illumination correction data for approx. 25 lenses. In step 2, if you select [Enable], the peripheral light correction will be applied automatically for any lens whose correction data has been registered in the camera. With EOS Utility (provided software, p.302), you can check which lenses have their correction data registered in the camera.
A Customizing Image CharacteristicsN You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 114. 1 Press the button. a Picture Style. 2 Select Select a Picture Style, then press the button. The Detail set. screen will appear. a parameter. 3 Select Select a parameter such as [Sharpness], then press <0>. the parameter.
A Customizing Image CharacteristicsN Parameter Settings and Effects Sharpness Adjusts the sharpness of the image. To make it less sharp, set it toward the E end. The closer it is to E, the softer the image will look. To make it sharper, set it toward the F end. The closer it is to F, the sharper the image will look. Contrast Adjusts the image contrast and the vividness of colors. To decrease the contrast, set it toward the minus end. The closer it is to G, the blander the image will look.
A Customizing Image CharacteristicsN V Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. kFilter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N: None Normal black-and-white image with no filter effects. Ye: Yellow The blue sky will look more natural, and the white clouds will look crisper.
A Registering Preferred Image CharacteristicsN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as sharpness and contrast are different. You can also adjust the parameters of a Picture Style which has been registered to the camera with EOS Utility (provided software, p.302). 1 Press the button. [User Def.].
A Registering Preferred Image CharacteristicsN a parameter. 5 Select Select a parameter such as [Sharpness], then press <0>. the parameter. 6 Set Press the key to adjust the parameter as desired, then press <0>. For details, see “Customizing Image Characteristics” on pages 112-114. Press the button to register the modified Picture Style. The Picture Style selection screen will then reappear. The base Picture Style will be indicated on the right of [User Def. *].
B: Matching the Light SourceN The function adjusting the color tone so that white objects look white in the picture is called white balance (WB). Normally, the (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with , you can select the white balance to match the light source or set it manually by shooting a white object. the button. 1 Press [White balance] will appear. the white balance.
B: Matching the Light SourceN [Custom White Balance]. 2 Select Under the [2] tab, select [Custom White Balance], then press <0>. The custom white balance selection screen will appear. the white balance data. 3 Import Select the image that was captured in step 1, then press <0>. On the dialog screen which appears, select [OK] and the data will be imported. When the menu reappears, press the button to exit the menu. the custom white balance. 4 Select Press the button.
2 Adjusting the Color Tone for the Light SourceN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with using color temperature conversion or color compensating filters. White Balance Correction 1 Select [WB Shift/BKT].
2 Adjusting the Color Tone for the Light SourceN White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing (WB-BKT). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
3 Setting the Color Reproduction RangeN The range of reproducible colors is called the color space. With this camera, you can set the color space to sRGB or Adobe RGB for captured images. For normal shooting, sRGB is recommended. In Basic Zone modes, sRGB is set automatically. 1 Select [Color space]. Under the [2] tab, select [Color space], then press <0>. the desired color space. 2 Set Select [sRGB] or [Adobe RGB], then press <0>.
Mirror Lock-up to Reduce Camera ShakeN The camera’s mechanical shake caused by the reflex mirror action can blur images taken with a super telephoto lens or close-up (macro) lens. In such cases, mirror lockup is effective. Mirror lockup is enabled by setting [8: Mirror lockup] to [1: Enable] in the [7 Custom Functions (C.Fn)] (p.255). 1 Focus the subject, then press the shutter button completely. The mirror will swing up. 2 Press the shutter button completely again.
Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended. About Remote Live View Shooting With EOS Utility (provided software, p.
A Shooting with the LCD Monitor 1 Display the Live View image. Press the button. The Live View image will appear on the LCD monitor. The Live View image will closely reflect the brightness level of the actual image you capture. the subject. 2 Focus When you press the shutter button halfway, the camera will focus with the current AF mode (p.131-137). the picture. 3 Take Press the shutter button completely. The picture will be taken and the captured image is displayed on the LCD monitor.
A Shooting with the LCD Monitor Enabling Live View Shooting Set [Live View shoot.] to [Enable]. In Basic Zone modes, [Live View shoot.] will be displayed under [2], and in Creative Zone modes, it will be displayed under [z]. Battery Life with Live View Shooting [Approx.
A Shooting with the LCD Monitor About the Information Display Each time you press the button, the information display will change.
A Shooting with the LCD Monitor Final Image Simulation The final image simulation reflects the effects of the Picture Style, white balance, etc., in the Live View image so you can see what the captured image will look like. During shooting, the Live View image will automatically reflect the function settings listed below. Final image simulation during Live View shooting Picture Style * All parameters such as sharpness, contrast, color saturation, and color tone will be reflected.
Shooting Function Settings Function settings particular to Live View shooting are explained here. Q Quick Control While the image is displayed on the LCD monitor in Creative Zone modes, pressing the button will enable you to set the AF mode, drive mode, white balance, Picture Style, Auto Lighting Optimizer, image-recording quality, and built-in flash settings. In Basic Zone modes, you can set the AF mode and the settings shown in the table on page 64. 1 Press the button.
z Menu Function Settings The menu options below are displayed. In Basic Zone modes, the Live View menu options will be displayed under [2], and in Creative Zone modes, they will be displayed under [z]. Live View shooting You can set Live View shooting to [Enable] or [Disable]. AF mode You can select [Live mode] (p.131), [u Live mode] (p.132), or [Quick mode] (p.136). Grid display With [Grid 1l] or [Grid 2m], you can display grid lines. It can help you level the camera vertically or horizontally.
z Menu Function Settings Quality 3 Aspect Ratio and Pixel Count 3:2 4:3 16:9 1:1 1 4608x3456 5184x2912* 3456x3456 5184x3456 (18.0 megapixels) (16.0 megapixels) (15.1 megapixels) (11 9 megapixels) 4 3072x2304 3456x1944 2304x2304 3456x2304 (8.0 megapixels) (7.0 megapixels) (6.7 megapixels) (5.3 megapixels) a 2592x1728 2304x1728 2592x1456* 1728x1728 (4.5 megapixels) (4.0 megapixels) (3.8 megapixels) (3.0 megapixels) b 1920x1280 1696x1280* 1920x1080 1280x1280 (2.5 megapixels) (2.2 megapixels) (2.
Changing the Autofocus Mode Selecting the AF Mode The AF modes available are [Live mode], [u Live mode] (face detection, p.132), and [Quick mode] (p.136). If you want to achieve precise focus, set the lens focus mode switch to , magnify the image, and focus manually (p.138). Select the AF mode. Under the [z] tab, select [AF mode] ([2] tab in Basic Zone modes). Select the desired AF mode, then press <0>.
Changing the Autofocus Mode the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. the picture. 4 Take Check the focus and exposure, then press the shutter button completely to take the picture (p.124). u (Face detection) Live Mode: c With the same AF method as the Live mode, human faces are detected and focused.
Changing the Autofocus Mode the subject. 2 Focus Press the shutter button halfway and the camera will focus the face covered by the < > frame. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. If a face cannot be detected, the AF point < > will be displayed and AF will be executed at the center. the picture. 3 Take Check the focus and exposure, then press the shutter button completely to take the picture (p.
Changing the Autofocus Mode Live Mode and u (Face Detection) Live Mode Notes AF operation Focusing will take slightly longer. Even when focus has been achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. If the light source changes while the Live View image is displayed, the screen might flicker and focusing may be difficult. If this happens, stop the Live View shooting and autofocus under the actual light source first.
Changing the Autofocus Mode Shooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Under a light source whose brightness, color, or pattern keeps changing. Night scenes or points of light. Under fluorescent lighting or when the image flickers. Extremely small subjects. Subjects at the edge of the picture.
Changing the Autofocus Mode Quick Mode: f The dedicated AF sensor is used to focus in One-Shot AF mode (p.83), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation. AF point 1 Display the Live View image. Press the button. The Live View image will appear on the LCD monitor. The small boxes on the screen are the AF points, and the larger box is the magnifying frame.
Changing the Autofocus Mode the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. When focus is achieved, the AF point which achieved focus will turn green and the Live View image will reappear. If focus is not achieved, the AF point will turn orange and blink. the picture.
MF: Focusing Manually You can magnify the image and focus precisely manually. 1 Set the lens focus mode switch to . Turn the lens focusing ring to focus roughly. the magnifying frame. 2 Move Press the key to move the Magnifying frame magnifying frame to the position where you want to focus. To return the magnifying frame to the center, press the <0> or button. the image. 3 Magnify Press the button. The area within the magnifying frame will be magnified.
Live View Shooting Cautions White and Red Internal Temperature Warning Icons If the camera’s internal temperature increases due to prolonged Live View shooting or a high ambient temperature, a white icon will appear. If you continue shooting while this icon is displayed, the image quality of still photos may deteriorate. You should stop the Live View shooting and allow the camera to cool down before shooting again.
Live View Shooting Cautions Shooting Result Cautions When you shoot continuously with the Live View function for a long period, the camera’s internal temperature may increase and it can degrade image quality. Terminate Live View shooting when not shooting images. Before taking a long exposure, stop Live View shooting temporarily and wait several minutes before shooting. This is to prevent image degradation.
Shooting Movies Set the Mode Dial to to shoot movies. The movie recording format will be MOV. Cards which can record movies When shooting movies, use a large-capacity SD card rated SD Speed Class 6 “ ” or higher. If you use a slow-writing card when shooting movies, the movie might not be recorded properly. And if you playback a movie on a card having a slow reading speed, the movie might not playback properly. To check the card’s read/write speed, refer to the card manufacturer’s Web site.
k Shooting Movies Connecting the camera to a TV set is recommended to playback the movies shot (p.218, 221). Autoexposure Shooting 1 Set the Mode Dial to . The reflex mirror will make a sound, then the image will appear on the LCD monitor. the subject. 2 Focus Before shooting a movie, autofocus or manual focus (p.131-138). When you press the shutter button halfway, the camera will focus with the current AF mode. the movie.
k Shooting Movies During movie shooting, do not point the lens toward the sun. The sun’s heat can damage the camera’s internal components. Cautions for movie shooting are on pages 163 and 164. If necessary, also read the Live View shooting cautions on pages 139 and 140. The ISO speed, shutter speed, and aperture are set automatically. AE lock is possible by pressing the button (p.107). To cancel AE lock during movie shooting, press the button.
k Shooting Movies Manual Exposure Shooting You can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. 1 Set the Mode Dial to . The reflex mirror will make a sound, then the image will appear on the LCD monitor. [Movie exposure]. 2 Select Press the button and under the [n] tab, select [Movie exposure], then press <0>. [Manual]. 3 Select Select [Manual], then press <0>.
k Shooting Movies and shoot the movie. 6 Focus The procedure is the same as steps 2 and 3 for “Autoexposure Shooting” (p.142). AE lock and exposure compensation cannot be set. Changing the shutter speed or aperture during movie shooting is not recommended since the changes in the exposure will be recorded. If you use a lens whose maximum aperture changes while you zoom, you should not zoom while shooting a movie. Changes in the exposure may be recorded.
k Shooting Movies About the Information Display Each time you press the button, the information display will change.
k Shooting Movies Notes for Both Autoexposure and Manual Exposure Shooting A movie file is recorded each time you shoot a movie. The image’s field of view is approx. 99%. The sound will be recorded by the camera’s built-in monaural microphone (p.142). Stereo sound recording is possible by connecting an external microphone (commercially available) equipped with a stereo mini plug (3.5mm dia.) to the camera’s external microphone IN terminal (p.18).
k Shooting Movies Shooting Still Photos While shooting a movie, you can also take a still photo by pressing the shutter button completely. Shooting Stills in the Mode If you take a still photo during movie shooting, the movie will record a still moment lasting approx. 1 sec. The captured still photo will be recorded to the card, and the movie shooting will resume automatically when the Live View image is displayed. The movie and still photo will be recorded as separate files on the card.
Shooting Function Settings Function settings particular to movie shooting are explained here. Q Quick Control While the image is displayed on the LCD monitor, you can press the button to set the AF mode, white balance, Picture Style, Auto Lighting Optimizer, image-recording quality (for still photos), movierecording size, movie digital zoom, and video snapshots. 1 Press the button. (7) The functions settable with Quick Control will appear on the left of the screen.
3 Setting the Movie-recording Size Under the [o] tab, [Movie rec. size] enables you to select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The 9 (frame rate) switches automatically depending on the [6 Video system] setting. Image size [1920x1080] : Full High-Definition (Full HD) recording quality. [1280x720] : High-Definition (HD) recording quality. [640x480] : Standard-definition recording quality. The aspect ratio will be 4:3.
3 Setting the Movie-recording Size Total Movie Recording Time and File Size Per Minute Due to limitations of the file system, movie shooting will stop automatically if the file size of a single movie clip reaches 4GB. To resume movie shooting, press the button. (A new movie file starts being recorded.) Movie-recording Size Total Recording Time (approx.) 4GB Card 8GB Card 16GB Card File Size (approx.) 11 min. 22 min. 44 min. 330 MB/min. 11 min. 22 min. 44 min. 330 MB/min. 46 min. 1 hr.
3 Using Movie Digital Zoom When the image size is set to [1920x1080] (Full HD), you can shoot with an approx. 3x to 10x digital zoom. 1 Select [1920x1080 9]. Under the [o] tab, set [Movie rec. size] to [1920x1080 9] by turning the <6> dial. the digital zoom. 2 Set Press the key to select [ ], then press <0>. Press the button to exit the menu and return to movie shooting. digital zoom. 3 Use While holding down the button, press the (zoom in) or (zoom out) button.
3 Taking Video Snapshots You can easily create a short movie with the video snapshot function. A video snapshot is a short movie clip lasting 2 sec., 4 sec., or 8 sec. A collection of video snapshots is called a video snapshot album and can be saved to the card as a single movie file. By changing the scene or angle in each video snapshot, you can create dynamic short movies. A video snapshot album can also be played together with background music (p.156, 213).
3 Taking Video Snapshots Creating a Video Snapshot Album the first video snapshot. 3 Shoot Press the button to shoot. Shooting dura ion The blue bars indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically. After the LCD monitor turns off and the access lamp stops blinking, the confirmation screen will appear. as a video snapshot album. 4 Save Press the key to select [ Save as album], then press <0>.
3 Taking Video Snapshots Options in Steps 4 and 5 Option Description Save as album (Step 4) The movie clip will be saved as the video snapshot album’s first video snapshot. Add to album (Step 5) The video snapshot just recorded will be added to the album recorded immediately before. W Save as a new album (Step 5) A new video snapshot album is created and the movie clip is saved as the first video snapshot. The new album will be a different file from he previously recorded album.
3 Taking Video Snapshots You can add to an album only video snapshots having the same duration (approx. 2 sec., 4 sec., or 8 sec. each). If you stop shooting a video snapshot before the set shooting duration elapses, the video snapshot will be added to the preceding album. And a new album will be created for subsequent video snapshots. Note that if you do any of the following while shooting video snapshots, a new album will be created for subsequent video snapshots. • Changing the [Movie rec. size] (p.
3 Menu Function Settings The menu options displayed under the [n], [o], and [Z] tabs are explained below. [n] tab Movie exposure Normally, set this to [Auto]. Setting it to [Manual] enables you to manually set the ISO speed, shutter speed, and aperture for movie shooting (p.144). AF mode The AF modes will be the same as described on pages 131-137. You can select [Live mode], [u Live mode], or [Quick mode]. Note that continuous focusing of a moving subject is not possible.
3 Menu Function Settings kShutter/AE lock button You can change the function assigned to the shutter button’s halfway position and to the AE lock button. • AF/AE lock: Normal function. Press the shutter button halfway to execute AF. Press the button for AE lock. • AE lock/AF: Press the shutter button halfway for AE lock. For AF, press the button. Convenient when you want to focus and meter at different parts of the picture. • AF/AF lock, no AE lock: Press the shutter button halfway to execute AF.
3 Menu Function Settings Remote control You can use the Remote Controller RC-6 (sold separately, p.261) to start and stop the movie shooting. Set the release mode switch to <2>, then press the transmit button. If the switch is set to (immediate shooting), still photo shooting will take effect. kHighlight tone priority If [Enable] is set, highlight detail will be improved. The dynamic range is expanded from the standard 18% gray to bright highlights.
3 Menu Function Settings [o] tab Sound recording Level meter Normally, the built-in microphone will record monaural sound. Stereo sound recording is possible by connecting an external microphone equipped with a stereo mini plug (3.5mm dia.) to the camera’s external microphone IN terminal (p.18). When an external microphone is connected, sound recording will switch automatically to the external microphone. [Sound rec.] options [Auto] : The sound recording level will be adjusted automatically.
3 Menu Function Settings [Wind filter] When [Enable] is set, outdoor wind noise entering the microphone will be reduced. Note that some low-tone noise might also be reduced. When shooting in places where there is no wind, set this to [Disable] for a more natural sound recording. The sound volume balance between L (left) and R (right) cannot be adjusted. The 48 kHz sampling frequency will be 16-bit recordings for both L and R.
3 Menu Function Settings [Z] tab Exposure compensation Although exposure compensation can be set up to ±5 stops, exposure compensation for movies is restricted only up to ±3 stops. For still photos, exposure compensation may extend up to ±5 stops. Auto Lighting Optimizer The Auto Lighting Optimizer can be set as explained on page 109. It will be applied to both movie shooting and still photos taken during movie shooting.
White and Red Internal Temperature Warning Icons If the camera’s internal temperature increases due to prolonged movie shooting or a high ambient temperature, a white icon will appear. Even if you shoot a movie while this icon is displayed, the movie’s image quality will not be affected. However, if you shoot still photos, the image quality of the still photos may deteriorate. You should stop shoo ing still photos and allow the camera to cool down.
Movie Shooting Cautions Recording and Image Quality If you use a card having a slow wri ing speed, a five-level indicator might appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will climb upward. If the indicator becomes full, movie shooting will stop automatically.
Handy Features Silencing the Beeper (p.166) Card Reminder (p.166) Setting the Image Review Time (p.166) Setting the Auto Power-off Time (p.167) Adjusting the LCD Monitor Brightness (p.167) Creating and Selecting a Folder (p.168) File Numbering Methods (p.170) Setting Copyright Information (p.172) Auto Rotation of Vertical Images (p.174) Checking Camera Settings (p.175) Reverting the Camera to the Default Settings (p.176) Turning the LCD Monitor Off/On (p.
Handy Features 3 Silencing the Beeper You can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [1] tab, select [Beep], then press <0>. Select [Disable], then press <0>. 3 Card Reminder This prevents shooting if there is no card in the camera. Under the [1] tab, select [Release shutter without card], then press <0>. Select [Disable], then press <0>.
Handy Features 3 Setting the Auto Power-off Time To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time. When the camera has turned off due to auto power off, you can wake it up by pressing the shutter button halfway or pressing any of the following buttons: , , , etc. If [Off] has been set, either turn off the camera yourself or press the button to turn off the LCD monitor to save battery power.
Handy Features 3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Create a Folder 1 Select [Select folder]. Under the [5] tab, select [Select folder], then press <0>. [Create folder]. 2 Select Select [Create folder], then press <0>. a new folder. 3 Create Select [OK], then press <0>.
Handy Features Selecting a Folder Lowest file number Number of images in folder With the folder selection screen displayed, select a folder and press <0>. The folder where the captured images will be saved is selected. Subsequent captured images will be recorded into the selected folder. Folder name Highest file number About Folders As with “100CANON” for example, the folder name starts with three digits (folder number) followed by five alphanumeric characters.
Handy Features 3 File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG. Under the [5] tab, select [File numbering], then press <0>. The available settings are descr bed below. Select one, then press <0>.
Handy Features [Auto reset]: The file numbering is reset to 0001 whenever you replace the card or create a folder. Whenever the card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to cards or folders. If the replacement card or existing folder already contains images recorded previously, the file numbering of the new images might continue from the file numbering of the existing images in the card or folder.
Handy Features 3 Setting Copyright InformationN When you set the copyright information, it will be appended to the image as Exif information. 1 Select [Copyright information]. Under the [7] tab, select [Copyright information], then press <0>. the option to be set. 2 Select Select [Enter author’s name] or [Enter copyright details], then press <0>. The text entry screen will appear. Select [Display copyright info.] to check the copyright information currently set.
Handy Features Text Entry Procedure Changing the entry area: Press the button to toggle between the top and bottom entry areas. Moving the cursor: Press the key to move the cursor. Entering text: In the bottom area, press the key or turn the <6> dial to select a character, then press <0> to enter it. Deleting a character: Press the button to delete one character. Exiting: After entering the text, press the button to finalize the text entry and return to the screen in step 2.
Handy Features 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and on the personal computer instead of horizontally. The setting of this feature can be changed. Under the [5] tab, select [Auto rotate], then press <0>. The available settings are described below. Select one, then press <0>. [OnPD] : The vertical image is automatically rotated during playback on both the camera’s LCD monitor and on the computer.
Handy Features C Checking Camera Settings While the shooting settings (p.47) are displayed, press the button to display the camera’s major function settings. Settings display Card remaining capacity Color space (p.121) WB correction (p.119)/ WB bracketing (p.120) Live View shooting (p.123) Red-eye reduction (p.91) Auto rotate display (p.174) Date/Time (p.34) Beeper (p.166) Auto power off (p.167) Sensor cleaning (p.
Handy Features 3 Reverting the Camera to the Default SettingsN The camera’s shooting settings and menu settings can be reverted to the default. This option is available in Creative Zone modes. 1 Select [Clear settings]. Under the [7] tab, select [Clear settings], then press <0>. [Clear all camera settings]. 2 Select Select [Clear all camera settings], then press <0>. [OK]. 3 Select Select [OK], then press <0>.
Handy Features Shooting Settings AF mode AF point selection Drive mode Metering mode One-Shot AF Automatic selection u (Single shooting) q (Evaluative metering) AUTO (Auto) Max.: 3200 ISO speed ISO Auto Exposure Canceled compensation/AEB Built-in flash func.
Handy Features Live View Shooting Settings Live View shooting AF mode Grid display Aspect ratio Metering timer Enable Live mode Off 3:2 16 sec. Movie Shooting Settings Movie exposure AF mode AF w/ shutter button during k kShutter/AE lock button Remote control Disable AF/AE lock Disable kHighlight tone priority Movie recording size Sound recording Metering timer Grid display Video snapshot Exposure compensation 1920x1080 Auto 16 sec.
Handy Features 3 Turning the LCD Monitor Off/On The shooting settings display (p.47) can be turned on or off by pressing the shutter button halfway. Under the [6] tab, select [LCD off/on btn], then press <0>. The available settings are described below. Select one, then press <0>. [Shutter btn.] : When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on.
3 Setting the FlashN The built-in flash and external Speedlite settings can be set with the camera’s menu. You can use the camera’s menu to set the external Speedlite function settings only if the attached EX-series Speedlite is compatible with this function. The setting procedure is the same as setting a camera menu function. Select [Flash control]. Under the [1] tab, select [Flash control], then press <0>. The flash control screen will appear. [Flash firing] Normally, set this to [Enable].
3 Setting the FlashN [Built-in flash func. setting] and [External flash func. setting] With [Built-in flash func. setting] and [External flash func. setting], you can set the functions listed in the table below. The functions displayed under [External flash func. setting] will vary depending on the Speedlite model. Select [Built-in flash func. setting] or [External flash func. setting]. The flash functions will be displayed. The functions not dimmed can be selected and set. [Built-in flash func.
3 Setting the FlashN Shutter sync. Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts. If [2nd curtain] is set, the flash will fire right before the exposure ends. When this is combined with a slow sync speed, you can create a trail of light such as from car headlights at night. With 2nd-curtain sync, a preflash is fired when you press the shutter button completely. This is to determine the exposure.
3 Setting the FlashN Clear flash settings With the [Built-in flash func. setting] or [External flash func. setting] screen displayed, press the button to display the screen to clear the flash settings. When you select [OK], the settings for the flash will be cleared. Setting the External Speedlite Custom Functions The Custom Functions displayed under [External flash C.Fn setting] will vary depending on the Speedlite model. 1 Display the Custom Function.
f Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can execute the sensor cleaning at anytime as well as disable it. Cleaning the Sensor Now 1 Select [Sensor cleaning]. Under the [6] tab, select [Sensor cleaning], then press <0>. [Clean nowf]. 2 Select Select [Clean nowf], then press <0>.
3 Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be vis ble on captured images. However, in case vis ble dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later. The Dust Delete Data is used by Digital Photo Professional (provided software, p.302) to erase the dust spots automatically. Preparation Get a solid-white object (paper, etc.). Set the lens focal length to 50mm or longer.
3 Appending Dust Delete DataN a solid-white object. 3 Photograph At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. The picture will be taken in aperturepriority AE mode at an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. When the picture is taken, the camera will start collecting the Dust Delete Data.
3 Manual Sensor CleaningN Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera. 1 Select [Sensor cleaning]. Under the [6] tab, select [Sensor cleaning], then press <0>. [Clean manually].
3 Manual Sensor CleaningN While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. • Setting the power switch to <2>. • Opening the battery compartment cover. • Opening the card slot cover. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor.
Wireless Flash Photography You can use the built-in flash for wireless flash shooting. The camera’s built-in flash can work as a master unit with Canon Speedlites having a wireless slave feature and wirelessly trigger the Speedlite(s) to fire. Canceling the slave unit’s auto power off To cancel the slave unit’s auto power off, press the camera’s button. If you are using manual flash firing, press the slave unit’s test firing (PILOT) button to cancel the auto power off.
Using Wireless FlashN Slave Unit Settings and Position Regarding your Speedlite (slave unit), refer to its instruction manual and set it as follows. The settings other than the below for the slave unit’s control are all set with the camera. Different types of Canon Speedlite slave units can be used and controlled together. (1) Set the Speedlite as a slave unit. (2) Set the Speedlite’s transmission channel to the same one as the camera’s.*1 (3) If you want to set the flash ratio (p.
Easy Wireless Flash Shooting An easy, basic, and fully-automatic wireless flash shooting is explained below. Fully Automatic Shooting with One External Speedlite Steps 1 to 4 and 6 apply to all wireless flash shooting. Therefore, these steps are omitted in the other wireless flash setups explained on the pages hereafter. 1 Press the button to raise the built-in flash. For wireless flash shooting, be sure to raise the built-in flash. [Flash control].
Easy Wireless Flash Shooting [Built-in flash func. 4 Select setting]. Select [Built-in flash func. setting], then press <0>. [EasyWireless]. 5 Select For [Built-in flash], select [EasyWireless], then press <0>. [Channel]. 6 Set Set the channel (1-4) to the same one as the slave unit. the picture. 7 Take As with normal flash shooting, you can set the camera and take the picture in the same way. the wireless flash shooting. 8 Exit For [Built-in flash func. setting], select [NormalFiring].
Easy Wireless Flash Shooting Fully-automatic Shooting with Multiple External Speedlites You can have multiple slave units fire as if they were a single Speedlite. Convenient when you need a large flash output. Basic settings: Flash mode E-TTL II meter. Built-in flash Channel : E-TTL II : Evaluative : EasyWireless : (Same as slave units) All the slave units will fire at the same output and be controlled to obtain a standard exposure.
Custom Wireless Flash Shooting Fully-automatic Shooting with One External Speedlite and Built-in Flash This descr bes fully-automatic wireless flash shooting with one external Speedlite and the built-in flash. You can change the flash ratio between the external Speedlite and built-in flash to adjust how the shadows look on the subject. On the menu screens, the <0> and <1> icons refer to the external Speedlite, and the <3> and <2> icons refer to the built-in flash. 1 Select [CustWireless].
Custom Wireless Flash Shooting Fully-automatic Shooting with Multiple External Speedlites Multiple Speedlite slave units can be treated as one flash unit or separated into slave groups whose flash ratio can be set. The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wireless flash setups with multiple Speedlites. Basic settings: Flash mode E-TTL II meter. Wireless func.
Custom Wireless Flash Shooting [1 (A:B)] Multiple slave units in multiple groups A B 1 Divide the slave units into groups A and B, and change the flash ratio to obtain the desired lighting effect. Refer to your Speedlite’s instruction manual to set one slave unit’s slave ID to A (Group A) and the other slave unit’s ID to B (Group B) and position them as shown in the illustration. Select [Wireless func.]. Follow step 2 on page 194 to select [0], then press <0>. 2 Set [Firing group] to [1 (A:B)].
Custom Wireless Flash Shooting Fully-automatic Shooting with the Built-in Flash and Multiple External Speedlites The built-in flash can also be added to wireless flash shooting explained on pages 195-196. The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wireless flash setups of multiple Speedlites complemented with the built-in flash. 1 Basic settings: Flash mode E-TTL II meter. Wireless func.
Other Settings Flash Exposure Compensation When [Flash mode] is set to [E-TTL II], flash exposure compensation can be set. The flash exposure compensation settings (see below) which can be set will differ depending on the [Wireless func.] and [Firing group] settings. [Flash exp. comp] The flash exposure compensation is applied to the built-in flash and all external Speedlites. [2 exp. comp.] The flash exposure compensation is applied to the built-in flash. [1 exp. comp.
Other Settings Setting the Flash Output Manually for Wireless Flash When [Flash mode] is set to [Manual flash], the flash output can be set manually. The flash output settings ([1 flash output], [Group A output], etc.) that can be set will differ depending on the [Wireless func.] setting (see below). [Wireless func.: 0] [Firing group: 1All]: The manual flash output setting will be applied to all the external Speedlites.
Image Playback This chapter explains features related to viewing photos and movies, going into more detail than in Chapter 2 “Basic Shooting and Image Playback.” Here you will find explanations about how to playback and erase photos and movies with the camera and viewing them on a TV set. About images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a computer or whose file name was changed.
x Searching for Images Quickly H Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine images on one screen. 1 Playback the image. When you press the button, the last image captured will be displayed. to the index display. 2 Switch Press the button. The 4-image index display will appear. The currently-selected image will be highlighted in a blue frame. Press the button again to switch to the 9-image index display.
x Searching for Images Quickly I Jump through Images (Jump display) With the single image display, you can turn the <6> dial to jump through the images forward or back according to the jump method that was set. 1 Select [Image jump w/6]. Under the [4] tab, select [Image jump w/6], then press <0>. the jump method. 2 Select Press the key to select the jump method, then press <0>.
u/y Magnified View You can magnify a shot image by 1.5x to 10x on the LCD monitor. 1 Magnify the image. During image playback, press the button. The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification. Press the button to reduce the magnification. If you hold down the button, the magnification will be reduced to the single image display. Magnified area position around the image.
b Rotating the Image You can rotate the displayed image to the desired orientation. 1 Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>. an image. 2 Select Press the key to select the image to be rotated. You can also select an image on the index display (p.202). the image. 3 Rotate Each time you press <0>, the image will rotate clockwise as follows: 90° o 270° o 0° To rotate another image, repeat steps 2 and 3. To exit and return to the menu, press the button.
3 Setting Ratings You can rate images and movies with one of five rating marks: l/m/ n/o/p. 1 Select [Rating]. Under the [4] tab, select [Rating], then press <0>. an image or movie. 2 Select Press the key to select an image or movie to be rated. You can display three images by pressing the button. To return to the single-image display, press the button. the image or movie. 3 Rate Press the key to select a rating.
3 Setting Ratings The total number of a rating can be displayed up to 999. If here are 1,000 or more images for a ra ing, [###] will be displayed. Taking advantage of ratings With [4 Image jump w/6], you can display only the rated images and movies. With [4 Slide show], you can playback only the rated images and movies. With Digital Photo Professional (provided software, p.302), you can select only the rated images and movies.
Q Quick Control During Playback During playback, you can press the button to set any of the following: [ Protect images], [b Rotate], [9 Rating], [U Creative filters], [S Resize (JPEG images only)], and [e Image jump w/6]. For movies, only the functions in bold above can be set. 1 Press the button. During image playback, press the button. The functions settable with Quick Control will appear on the left of the screen. a function and set it.
Q Quick Control During Playback Pressing the button during the index display will switch to the single-image display and the Quick Control icons will appear. Pressing the button again will return to the index display. For images taken with another camera, selectable functions may be limited.
k Enjoying Movies Basically, you can playback movies in the following three ways: Playback on a TV set (p.218, 221) Use the provided AV cable or an HDMI Cable HTC-100 (sold separately) to connect the camera to a TV set. Then you can playback the captured movies and still photos on the TV. If you have a High-Definition TV set and connect your camera with an HDMI cable, you can watch Full High-Definition (Full HD: 1920x1080) and HighDefinition (HD: 1280x720) movies with higher image quality.
k Enjoying Movies Playback and Editing with a Personal Computer (See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser, p.304) The movie files recorded in the card can be transferred to a personal computer and played or edited with ZoomBrowser EX/ImageBrowser (provided software, p.302). You can also extract a single frame from a movie and save it as a still photo. To have the movie playback smoothly on a personal computer, use a high-performance personal computer.
k Playing Movies 1 Playback the image. Press the button to display images. a movie. 2 Select Press the key to select a movie. On the single-image display, the <1s> icon displayed on the upper left indicates a movie. If the movie is a video snapshot, < s> will be displayed. You can press the button to switch the shooting information display (p.227). On the index display, the perforation on the left edge of the image indicates a movie.
k Playing Movies Function Playback Description 2 Exit 7 Play Returns to the single-image display. 8 Slow motion Adjust the slow motion speed by pressing the key. The slow-motion speed is indicated on the upper right. 5 First frame Displays the movie’s first frame. 3 Previous frame Each time you press <0>, a single previous frame is displayed. If you hold down <0>, it will rewind the movie. 6 Next frame Each time you press <0>, the movie will play frame-byframe.
X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in 1-sec. increments. 1 On the movie playback screen, select [X]. The editing screen will be displayed. the part to be edited out. 2 Specify Select either [U] (Cut beginning) or [V] (Cut end), then press <0>. Press the key to see the previous or next frames. Holding it down will fast forward the frames. After deciding which part to edit out, press <0>.
3 Slide Show (Auto Playback) You can playback the images in the card as an automatic slide show. 1 Number of images to be played Select [Slide show]. Under the [4] tab, select [Slide show], then press <0>. the images to be played. 2 Select Press the key to select the desired option, then press <0>. [All images/Movies/Stills] Press the key to select one of the following: [jAll images/ kMovies/zStills]. Then press <0>.
3 Slide Show (Auto Playback) [Set up] as desired. 3 Set Press the key to select [Set up], then press <0>. Set the [Display time] (still photos), [Repeat], [Transition effect], and [Background music]. The background music selection procedure is explained on the next page. After selecting the settings, press the button.
3 Slide Show (Auto Playback) the slide show. 4 Start Press the key to select [Start], then press <0>. After [Loading image...] is displayed, the slide show will start. the slide show. 5 Quit To quit the slide show and return to he setting screen, press the button. Selecting the Background Music Set [Background music] to [On], then press <0>. Press the key to select the desired background music then press <0>. You can also select multiple background musics.
Viewing the Images on TV You can view the still photos and movies on a TV set. Adjust the movie’s sound volume with the TV set. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and TV set. Depending on the TV set, part of he image displayed might be cut off. Viewing on HD (High-Definition) TV Sets HDMI Cable HTC-100 (sold separately) is required. 1 Connect the HDMI cable to the camera.
Viewing the Images on TV the button. 5 Press The image will appear on the TV screen (Nothing will be displayed on the camera’s LCD monitor). The images will automatically be displayed at the TV’s optimum resolution. By pressing the button, you can change the display format. To playback movies, see page 212. Do not connect any other device’s output to the camera’s terminal. Doing so may cause a malfunction. Certain TVs might not be able to playback the captured images.
Viewing the Images on TV the camera’s button. 3 Press An image will appear on the TV screen and you can use the TV’s remote control to playback images. an image or movie. 4 Select Point the remote control toward the TV set and press the / button to select an image. Still photo playback menu Movie playback menu : Return : 9-image index : Play movie : Slide show : Disp. shooting info : Rotate the remote control’s Enter 5 Press button.
Viewing the Images on TV Viewing on Non-HD (High-Definition) TV Sets 1 Connect the provided AV cable to the camera. With the plug’s logo facing the back of the camera, insert it into the < q> terminal. (Red) (White) (Yellow) the AV cable to the TV 2 Connect set. Connect the AV cable to the TV’s video IN terminal and audio IN terminal. on the TV and switch the 3 Turn TV’s video input to select the connected port. the camera’s power switch to 4 Set <1>. the button.
K Protecting Images Protecting an image prevents it from being erased accidentally. 3 Protecting a Single Image 1 Select [Protect images]. Under the [3] tab, select [Protect images], then press <0>. The protect setting screen will appear. [Select images]. 2 Select Select [Select images], then press <0>. Image protect icon the image. 3 Protect Press the key to select the image to be protected, then press <0>. When an image is protected, the icon will appear on the top of the screen.
K Protecting Images 3 Protecting All Images in a Folder or Card You can protect all the images in a folder or card at one time. When you select [All images in folder] or [All images on card] in [3 Protect images], all the images in the folder or card will be protected. To cancel the image protection, select [Unprotect all images in folder] or [Unprotect all images on card]. If you format the card (p.45), the protected images will also be erased. Movies can also be protected.
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.222) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a 1+73 image will erase both the 1 and 73 images. Erasing a Single Image 1 Playback the image to be erased. the button.
L Erasing Images [Select and erase images]. 2 Select Select [Select and erase images], then press <0>. The images will be displayed. To display the three-image display, press the button. To return to the single-image display, press the button. the images to be erased. 3 Select Press the key to select the image to be erased, then press the key. A checkmark will be displayed on the upper left. To select other images to be erased, repeat step 3. the images.
C Shooting Information Display Sample Image Taken in a Creative Zone Mode Protect Exposure compensation amount Rating Flash exposure compensation amount Folder number - File number Aperture Histogram (Brightness/RGB) Shutter speed Picture Style/Settings Metering mode Shooting mode ISO speed Highlight tone priority White balance Image-recording quality Playback number/ Total images recorded Eye-Fi transmission Color space Shooting date and time White balance correc ion File size * With 1+73 image
C Shooting Information Display Sample Image Taken in a Basic Zone Mode Ambience and ambience effects Shooting mode Lighting or scene * For images taken in Basic Zone modes, the information displayed differ depending on the shooting mode. * Photos taken in the mode will show [Background blur].
C Shooting Information Display About the Highlight Alert When the shooting information is displayed, any overexposed areas of the image will blink. To obtain more image detail in the overexposed areas, set the exposure compensation to a negative amount and shoot again. About the Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. The display can be switched with [4 Histogram].
Post-Processing Images After shooting, you can apply Creative filters or resize the images (downsize the pixel count). It may not be possible to process images shot with a different camera. Post-processing images as described in this chapter cannot be done while the camera is connected to a personal computer via the terminal.
U Creative Filters You can apply the following Creative filters to an image and save it as a new image: Grainy B/W, Soft focus, Fish-eye effect, Toy camera effect, and Miniature effect. 1 Select [Creative filters]. Under the [3] tab, select [Creative filters], then press <0>. The images will be displayed. an image. 2 Select Select the image you want to apply a filter to. By pressing the button, you can switch to the index display and select an image. a filter.
U Creative Filters the image. 5 Save Select [OK] to save the image. Note the destination folder and image file number, then select [OK]. To apply a filter to another image, repeat steps 2 to 5. To exit and return to the menu, press the button. With 1 or 1+73 images, the 1 image will be applied with the Creative filter and saved as a JPEG image.
U Creative Filters Creative Filter Features Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. Fish-eye effect Gives the effect of a fish-eye lens. The image will have a barrel-type distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
S Resize You can resize an image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3/4/a/b images. JPEG c and RAW images cannot be resized. 1 Select [Resize]. Under the [3] tab, select [Resize], then press <0>. The images will be displayed. an image. 2 Select Select the image you want to resize. By pressing the button, you can switch to the index display and select an image. the desired image size.
S Resize Resize Options According to Original Image Size Available Resize Settings Original Image Size 3 4 a b c k k k k k k k k k 4 a k b c About Image Sizes Images such as the [8.0M 3456x2304] image size displayed in step 3 (p.233) have a 3:2 aspect ratio. The image size according to aspect ratios is shown in the table below. The asterisked image-recording quality figures do not exactly match the aspect ratio. The image will be slightly cropped.
Printing Images Printing (p.236) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. Digital Print Order Format (DPOF) (p.245) DPOF (Digital Print Order Format) enables you to print images recorded in the card according to your printing instructions such as the image selection, quantity to print, etc.
Preparing to Print The direct printing procedure is done entirely with the camera while you look at the LCD monitor. Connecting the Camera to a Printer 1 Set the camera’s power switch to <2>. up the printer. 2 Set For details, see the printer’s instruction manual. the camera to the 3 Connecting printer. Use the interface cable provided with the camera. Connect the cable to the camera’s terminal with the cable plug’s icon facing the front of the camera.
Preparing to Print wPictBridge the image. 6 Playback Press the button. The image will appear, and the icon will appear on the upper left to indicate that the camera is connected to a printer. Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. Do not use any interface cable other than the one provided. If there is a long beeping sound in step 5, it indicates a problem with the printer.
wPrinting The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s instruction manual. Printer-connected icon 1 Select the image to be printed. Check that the icon is displayed on the upper left of the LCD monitor. Press the key to select the image to be printed. <0>. 2 Press The print setting screen will appear. Print setting screen Sets the printing effects (p.240).
wPrinting Q Setting the Paper Size Select the size of the paper loaded in the printer, then press <0>. The paper type screen will appear. Y Setting the Paper Type Select the type of the paper loaded in the printer, then press <0>. The page layout screen will appear. U Setting the Page Layout Select the page layout, then press <0>. The print setting screen will reappear. Bordered The print will have white borders along the edges. Borderless The print will have no borders.
wPrinting the printing effects. 4 Set Set as necessary. If you need not set Printing Effect any printing effects, go to step 5. What is displayed on the screen differs depending on the printer. Select the option on the upper right (circled in the screenshot), then press <0>. Select the desired printing effect, then press <0>. If the icon is displayed brightly next to , you can also adjust the printing effect (p.242).
wPrinting the date and file number 5 Set imprinting. Set as necessary. Select , then press <0>. Set as desired, then press <0>. the number of copies. 6 Set Set as necessary. Select , then press <0>. Set the number of copies, then press <0>. printing. 7 Start Select [Print], then press <0>. With Easy printing, you can print another image using the same set ings. Just select the image and press the button. With Easy printing, the number of copies will always be 1.
wPrinting e Adjustment of Printing Effects In step 4 on page 240, select the printing effect. When the icon is displayed brightly next to , you can press the button to adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4. Brightness The image brightness can be adjusted. Adjust levels When you select [Manual], you can change the histogram’s distr bution and adjust the image’s brightness and contrast.
wPrinting Trimming the Image Tilt correction You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting screen, select [Trimming]. 2 Set the trimming frame size, position, and aspect ratio. The image area within the trimming frame will be printed.
wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, he grainier the picture will look in the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately. Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options 1 Select [Print order]. Under the [3] tab, select [Print order], then press <0>. [Set up]. 2 Select Select [Set up], then press <0>. the option as desired. 3 Set Set the [Print type], [Date], and [File No.].
W Digital Print Order Format (DPOF) Print type Date File number K L K L Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Both Prints both the standard and index prints. On Off On Off [On] imprints the recorded date on the print. [On] imprints the file No. on the print. the setting. 4 ExitPress the <7> button. The print order screen will reappear. Next, select [Sel.Image], [Byn], or [All image] to order the images to be printed.
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. To display the three-image display, press the button. To return to the single-image display, press the button. After completing the print order, press the button to save the print order to the card. Quantity Total images selected Check mark Index icon [Standard] [Both] Press the key to set the number of copies to be printed for the displayed image.
W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. 1 Prepare to print. See page 236. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [3] tab, select [Print order]. 3 Select [Print]. [Print] will be displayed only if the camera is connected to a printer and printing is possible. 4 Set the [Paper settings] (p.238). Set the printing effects (p.240) if necessary. 5 Select [OK].
Customizing the Camera Cre at iv You can customize various camera features to suit your picture-taking preferences with Custom Functions. Custom Functions can be set and used only in Creative Zone modes.
3 Setting Custom FunctionsN 1 Custom Function No. Select [Custom Functions (C.Fn)]. Under the [7] tab, select [Custom Functions (C.Fn)], then press <0>. the Custom Function No. 2 Select Press the key to select the Custom Function No., then press <0>. the setting as desired. 3 Change Press the key to select the setting (number), then press <0>. Repeat steps 2 and 3 if you want to set other Custom Functions.
3 Setting Custom FunctionsN Custom Functions A LV shooting C.Fn I: Exposure 1 Exposure level increments 2 ISO expansion 3 Flash sync. speed in Av mode k p.252 k k C.Fn II: Image 4 Long exposure noise reduction 5 High ISO speed noise reduction 6 Highlight tone priority p.253 p.254 k k k C.Fn III: Autofocus/Drive 7 AF-assist beam firing p.
3 Custom Function SettingsN Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn IV: Operation/Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
3 Custom Function SettingsN 2: 1/200 sec. (fixed) The flash-sync speed is fixed to 1/200 sec. This more effectively prevents subject blur and camera shake than with setting 1. However, the background may come out darker than with setting 1. When 1 or 2 is set, high-speed sync cannot be used with an external Speedlite. C.Fn II: Image C.Fn-4 Long exposure noise reduction 0: Off 1: Auto For 1 sec.
3 Custom Function SettingsN C.Fn-5 High ISO speed noise reduction Reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. At low ISO speeds, the noise in the shadow areas is further reduced. Change the setting to suit the noise level. 0: Standard 1: Low 2: Strong 3: Disable With setting 2, the maximum burst for continuous shooting will greatly decrease.
3 Custom Function SettingsN C.Fn III: Autofocus/Drive C.Fn-7 AF-assist beam firing The AF-assist beam can be emitted by the camera’s built-in flash or by an external, EOS-dedicated Speedlite. 0: Enable If necessary, the AF-assist beam will be emitted by the built-in flash or external Speedlite. 1: Disable The AF-assist beam is not emitted. 2: Enable external flash only If an external Speedlite is attached, it will emit the AF-assist beam when necessary.
3 Custom Function SettingsN C.Fn IV: Operation/Others C.Fn-9 Shutter/AE lock button 0: AF/AE lock 1: AE lock/AF Convenient when you want to focus and meter separately. Press the button to autofocus, and press the shutter button halfway to apply AE lock. 2: AF/AF lock, no AE lock In the AI Servo AF mode, you can press the button to stop the AF operation momentarily. This prevents the AF from being thrown off by any obstacle passing between the camera and subject.
3 Custom Function SettingsN C.Fn-11 LCD display when power ON 0: Display on When the power switch is turned on, the shooting settings will be displayed (p.47). 1: Previous display status If you pressed the button and turned off the camera while the LCD monitor was off, the shooting settings will not be displayed when you turn on the camera again. This helps to save battery power. The menu screens and image playback will still be displayed when used.
3 Registering My MenuN Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. 1 Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <0>. [Register to My Menu]. 2 Select Select [Register to My Menu], then press <0>. the desired items. 3 Register Select the item to be registered, then press <0>. On the confirmation dialog, select [OK] and press <0> to register the item.
Reference This chapter provides reference information for camera features, system accessories, etc.
Using a Household Power Outlet With AC Adapter Kit ACK-E8 (sold separately), you can connect the camera to a household power outlet and not worry about the remaining battery level. 1 Connect the power cord. Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet. the DC Coupler. 2 Connect Connect the cord’s plug to the DC Coupler. the DC Coupler. 3 Insert Open the cover and insert the DC Coupler until it locks in place.
Remote Control Shooting Remote Controller RC-6 (Sold separately) This remote controller enables you to take pictures wirelessly up to about 5 meters/16.4 feet from the camera. You can either shoot immediately or use a 2-sec. delay. Remote control sensor Set the self-timer to (p.89). Point the remote controller toward the camera’s remote control sensor and press the transmit button. The camera will autofocus. When focus is achieved, the self-timer lamp will light and the picture will be taken.
Remote Control Shooting F Remote Switch RS-60E3 (Sold separately) Remote Switch RS-60E3 (sold separately) comes with an approx. 60 cm/2.0 ft cord. When connected to the camera’s remote control terminal, Remote Switch RS-60E3 can be used to press the shutter button halfway and completely. Using the Eyepiece Cover When you use the self-timer, bulb, or Remote Switch and do not look through the viewfinder, stray light entering the viewfinder can cause the image to look dark.
External Speedlites EOS-dedicated, EX-series Speedlites Basically operates like a built-in flash for easy operation. When an EX-series Speedlite (sold separately) is attached to the camera, almost all the autoflash control is done by the camera. In other words, it is like a high-output flash attached externally in place of the built-in flash. For detailed instructions, see the EX-series Speedlite’s instruction manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites.
External Speedlites Canon Speedlites other than the EX-series With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to (manual exposure) or (aperture-priority AE) and adjust the aperture setting before shooting. If you are using a Speedlite which has manual flash mode, shoot in the manual flash mode.
Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or inquire the card’s manufacturer.
Using Eye-Fi Cards the [Access point SSID:]. 5 Check Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the button three times to exit the menu. the picture. 6 Take The picture is transferred and the Transmission status icon icon switches from gray (Not connected) to one of the icons below. For transferred images, O is displayed in the shooting information display (p.226).
Using Eye-Fi Cards Cautions for Using Eye-Fi Cards If “J” is displayed, an error occurred while retrieving the card information. Turn he camera’s power switch off and on again. Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In hospitals, airports, and other places where wireless transmissions are prohibited, remove the Eye-Fi card from the camera. If the image transfer does not function, check the Eye-Fi card and personal computer settings.
Function Availability Table According to Shooting Modes o: Set automatically k: User selectable Mode Dial All recording quality settings selectable Basic Zone : Not selectable Creative Zone k A 7 C 2 3 4 5 6 d s f a 8 k z*1 k k k k k k k k k k k k k Auto / ISO Auto o o o o o o o o k k k k k k Manual k k k k k k*2 Settable maximum ISO speed limit k k k k k Picture Automatic setting D D D D D D D D Style Manual selection k k k k k k o o o o o o o o k k k k k k k k k k k k k k k k k
Function Availability Table According to Shooting Modes Basic Zone Mode Dial Creative Zone A 7 C 2 3 4 5 6 d s f a 8 k z*1 o o o o o o o o k k k k k selection k k k k k Program shift k Exposure compensation k k k k k k k k k AE lock k k k k Depth-of-field preview k k k k k k k k k k k k k k k k j (10 sec.) k k k k k k k k k k k k k l (2 sec.
3 Menu Settings For Viewfinder Shooting and Live View Shooting 1 Shooting 1 (Red) Page Quality 73 / 83 / 74 / 84 / 7a / 8a / b / c / 1+73 / 1 76 Beep Enable / Disable 166 Release shutter without card Enable / Disable 166 Image review Off / 2 sec. / 4 sec. / 8 sec.
3 Menu Settings y Shooting 3 (Red) Page Dust Delete Data Obtains data to be used to erase dust spots 185 ISO Auto Max.: 400 / Max.: 800 / Max.: 1600 / Max.: 3200 / Max.: 6400 80 Live View shooting Enable / Disable 125 AF mode Live mode / u Live mode / Quick mode 131 Grid display Off / Grid 1l / Grid 2m 129 Aspect ratio 3:2 / 4:3 / 16 9 / 1:1 129 Metering timer 4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min.
3 Menu Settings 5 Set-up 1 (Yellow) Page Auto power off 30 sec. / 1 min. / 2 min. / 4 min. / 8 min. / 15 min.
3 Menu Settings k For Movie Shooting n Movie 1 (Red) Page Movie exposure Auto / Manual 157 AF mode Live mode / u Live mode / Quick mode 157 AF with shutter button during k Disable / Enable 157 kShutter/AE lock button AF/AE lock / AE lock/AF / AF/AF lock, no AE lock / AE/AF, no AE lock 158 Remote control Disable / Enable 159 kHighlight tone priority Disable / Enable 159 Movie recording size: 1920x1080 (6 / 5 / 4) / 1280x720 (8 / 7) / 640x480 (6 / 5) 150 Digital zoom: OFF / 3x - 10x 15
3 Menu Settings Z Movie 3 (Red) Page Exposure compensation 1/3-stop increments, ±5 stops 162 Auto Lighting Optimizer Disable / Low / Standard / Strong 162 Custom White Balance Manual setting of white balance 162 DAuto / PStandard / QPortrait / RLandscape / SNeutral / UFaithful / VMonochrome / WUser Def. 1, 2, 3 162 Quality 73 / 83 / 74 / 84 / 7a / 8a / b / c / 1+73 / 1 76 Beep Enable / Disable 166 Release shutter without card Enable / Disable 166 Image review Off / 2 sec. / 4 sec.
3 Menu Settings 4 Playback 2 (Blue) Page Histogram Brightness / RGB 228 Image jump w/6 1 image / 10 images / 100 images / Date / Folder / Movies / Stills / Rating 203 Slide show Playback description / Display time / Repeat / Transition effect / Background music 215 Rating [OFF] / l / m / n / o / p 206 Bass boost Disable / Enable 213 Control over HDMI Disable / Enable 219 Auto power off 30 sec. / 1 min. / 2 min. / 4 min. / 8 min. / 15 min.
System Map ST-E2 270EX II Eyepiece Extender EP-EX15ll Rubber Frame Ef 320EX 430EX II 580EX II Macro Ring Lite Macro Twin Lite MR-14EX MT-24EX Bundled Accessories Eyecup Ef E-series Dioptric Adjustment Lenses Wide Strap EW-100DB lll Angle Finder C Semi Hard Case EH19-L AC Adapter Kit ACK E8 Battery Pack LP-E8 Battery Charger LC-E8 or LC-E8E Hand Strap E2 DC Coupler DR-E8 Battery Grip BG-E8 276 Battery Magazine BGM-E8L for two LP-E8 battery packs Battery Magazine BGM-E8A for size-AA/LR6 bat
System Map Remote Controller RC-6 Remote Switch RS-60E3 EF lenses EF-S lenses External microphone HDMI Cable HTC-100 (2.9 m/9.5 ft.) TV/Video Stereo AV Cable AVC-DC400ST (1.3 m/4.3 ft.) EOS DIGITAL Solution Disk Software Instruction Manual PictBridge-compatible printer Interface Cable (1.3 m/4.3 ft.) Interface Cable IFC-200U/500U (1.9 m/6.2 ft.) / (4.7 m/15.4 ft.
Troubleshooting Guide If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery pack does not recharge. Do not recharge any battery pack other than a genuine Canon Battery Pack LP-E8. The battery charger’s lamp blinks.
Troubleshooting Guide The battery becomes exhausted quickly. Use a fully-charged battery pack (p.26). The rechargeable battery pack performance will degrade over repeated use. Purchase a new one. If you use Live View shooting or shoot movies for a prolonged period (p.123, 141), the number of possible shots will decrease. If you hold down the shutter button for a long time or often use only the AF without taking pictures, the number of poss ble shots will decrease.
Troubleshooting Guide The card cannot be used. If a card error message is displayed, see page 30 or 287. The file numbering does not start from 0001. If the card already contains recorded images, the image number might not start from 0001 (p.170). The image is out of focus. Set the lens focus mode switch to (p.36). To prevent camera shake, press the shutter button gently (p.39, 40). If the lens has an Image Stabilizer, set the IS switch to <1>.
Troubleshooting Guide The maximum burst during continuous shooting is lower. Under [7 Custom Functions (C.Fn)], set [5: High ISO speed noise reduction] to [Standard], [Low], or [Disable]. If it is set to [Strong], the maximum burst during continuous shooting will greatly decrease (p.254). If you shoot something that has fine detail (field of grass, etc.), the file size will be larger and the actual maximum burst might be lower than the number mentioned on page 76. ISO 100 cannot be set.
Troubleshooting Guide When I use the mode with flash, the shutter speed becomes slow. If you shoot at night when the background is dark, the shutter speed becomes slow automatically (slow-sync shooting) so that both the subject and background are properly exposed. If you do not want a slow shutter speed to be set, set [3: Flash sync. speed in Av mode] in [7 Custom Functions (C.Fn ] to 1 or 2 (p.252). The built-in flash pops up by itself.
Troubleshooting Guide The shutter makes two shooting sounds during Live View shooting. If you use flash, the shutter will make two sounds each time you shoot (p.125). During Live View and movie shooting, a white or red icon is displayed. It indicates that the camera’s internal temperature is high. If the white icon is displayed, the still photo’s image quality might deteriorate.
Troubleshooting Guide Playback Problems The LCD monitor does not display a clear image. If the LCD monitor is dirty, use a soft cloth to clean it. In low or high temperatures, the LCD monitor display may seem slow or might look black. It will return to normal at room temperature. Part of the image blinks in black. It is the highlight alert (p.228). Overexposed highlight areas with a loss of highlight detail will blink. The image cannot be erased.
Troubleshooting Guide The subject looks distorted during movie shooting. If you move the camera to the left or right quickly (high-speed panning) or shoot a moving subject, the image may look distorted. No image appears on the TV screen. Make sure the AV cable or HDMI cable’s plug is inserted all the way in (p.218, 221). Set the video OUT system (NTSC/PAL) to the same video system as the TV set (p.221). My card reader does not recognize the card.
Troubleshooting Guide The file name starts with “MVI_”. It is a movie file (p.171). The shooting date and time displayed is incorrect. The correct date and time has not been set (p.34). The date and time is not in the picture. The shooting date and time does not appear in the picture. The date and time is instead recorded in the image data as shooting information. When printing, you can imprint the date and time in the picture by using the date and time recorded in the shooting information (p.241).
Error Codes Error No. If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Countermeasures No. Error Message & Solution Communications between the camera and lens is faulty. Clean the lens contacts. 01 Î Clean the electrical contacts on the camera and lens and use a Canon lens (p.15, 18). Card cannot be accessed. Reinsert/change card or format card with camera. 02 Î Remove and insert the card again, replace the card, or format the card (p.29, 45).
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash SD memory card, SDHC memory card, SDXC memory card Approx. 22.3 x 14.9 mm Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is approx. 1.6 times the lens focal length) Canon EF mount • Image Sensor Type: Effective pixels: Aspect ra io: Dust delete feature: CMOS sensor Approx. 18.
Specifications • Viewfinder Type: Coverage: Magnification: Eye point: Built-in dioptric adjustment: Focusing screen: Mirror: Depth-of-field preview: Eye-level pentamirror Vertical/Horizontal approx. 95% (with Eye point approx. 19 mm) Approx. 0.85x (-1 m-1 with 50mm lens at infinity) Approx. 19 mm (From eyepiece lens center at -1 m-1) Approx. -3.0 - +1.
Specifications • Shutter Type: Shutter speeds: Electronically-controlled, focal-plane shutter 1/4000 sec. to 1/60 sec. (Scene Intelligent Auto mode), X-sync at 1/200 sec. 1/4000 sec. to 30 sec., bulb (Total shutter speed range. Available range varies by shooting mode.) • Flash Built-in flash: Retractable, auto pop-up flash Guide No.: Approx. 13/43 (ISO 100, in meters/feet) Flash coverage: Approx. 17mm lens angle of view Recycling time approx. 3 sec.
Specifications • Movie Shooting Movie compression: MPEG-4 AVC/H.264 Variable (average) bit rate Audio recording format: Linear PCM Recording format: MOV Recording size and frame rate: 1920x1080 (Full HD) : 30p/25p/24p 1280x720 (HD) : 60p/50p 640x480 (SD) : 30p/25p * 30p: 29.97 fps, 25p: 25.00 fps, 24p: 23.976 fps, 60p: 59.94 fps, 50p: 50.00 fps File size: 1920x1080 (30p/25p/24p) : Approx. 330 MB/min. 1280x720 (60p/50p) : Approx. 330 MB/min. 640x480 (30p/25p) : Approx. 82.5 MB/min.
Specifications • Playback Image display formats: Single image, Single image + Info (Basic info, shooting info, histogram), 4-image index, 9-image index, image rotate possible Zoom magnification: Approx. 1.
Specifications • Power Battery: Battery life: (Based on CIPA testing standards) Movie shooting time Battery Pack LP-E8 (Quantity 1) * AC power can be supplied via AC Adapter Kit ACK-E8 * With Battery Grip BG-E8 attached, size-AA/LR6 batteries can be used With viewfinder shooting: Approx. 440 shots at 23°C/73°F, approx. 400 shots at 0°C/32°F With Live View shooting: Approx. 180 shots at 23°C/73°F, approx. 150 shots at 0°C/32°F Approx. 1 hr. 40 min. at 23°C/73°F Approx. 1 hr. 20 min.
Specifications • Battery Charger LC-E8E Compatible battery: Recharging time: Rated input: Rated output: Working temperature range: Working humidity: Dimensions (W x H x D): Weight: Battery Pack LP-E8 Approx. 2 hours (at 23°C/73°F) 100 - 240 V AC (50/60 Hz) 8.4 V DC / 720 mA 6°C - 40°C / 43°F - 104°F 85% or less Approx. 69 x 28 x 87.5 mm / 2.7 x 1.1 x 3.4 in. Approx. 82 g / 2.9 oz. • EF-S18-55mm f/3.5-5.
Specifications Weight: Hood: Case: Approx. 195 g / 6.9 oz. EW-60C (sold separately) LP814 (sold separately) • EF-S18-135mm f/3.5-5.6 IS Angle of view: Diagonal extent: 74°20’ - 11°30’ Horizontal extent: 64°30’ - 9°30’ Vertical extent: 45°30’ - 6°20’ Lens construction: 16 elements in 12 groups Minimum aperture: f/22 - 36 Closest focusing distance*: At 18mm focal length: 0.49 m / 1.61 ft. (327 x 503 mm / 12.9 x 19.8 in. field of view) At 135mm focal length: 0.45 m / 1.48 ft. (75 x 112 mm / 3.0 x 4.4 in.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc. in the United States and o her countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Mul imedia Interface are a trademark or registered trademark of HDMI Licensing LLC.
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision. • Keep the camera from the reach of small children. The neck strap can accidentally choke the child.
MEMO 299
MEMO 300
Software Start Guide This chapter gives an overview of the software in the EOS DIGITAL Solution Disk (CD-ROM) provided with the camera and explains how to install the software in a personal computer. It also explains how to view the pdf files in the Software Instruction Manual CD-ROM.
Software Start Guide EOS DIGITAL Solution Disk This disk contains various software for EOS DIGITAL cameras. EOS Utility With the camera connected to a personal computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer. You can also use the personal computer to set various camera settings and shoot remotely with the computer connected to the camera. Also, you can copy background music tracks, such as EOS Sample Music*, to the card.
Software Start Guide Installing the Software Do not connect the camera to your computer before you install the software. The software will not be installed correctly. Even if a previous version of the software is installed, install the software by following the steps below (the newer version will overwrite the previous version). 1 Insert EOS DIGITAL Solution Disk (CD-ROM).
Software Start Guide Software Instruction Manual Contains the Software Instruction Manuals. Copying and Viewing the Instruction Manual PDFs 1 Insert the [Software INSTRUCTION MANUAL] CD-ROM into your computer. 2 Double-click the CD-ROM icon. For Windows, the icon is displayed in [(My) Computer]. For Macintosh, the icon is displayed on the desktop. 3 Copy the [English] folder to your computer. Instruction Manual PDFs with the names below are copied. Windows Macintosh EUx.xW_E_xx EUx.
Quick Reference Guide and Instruction Manual Index Menu Operations - - - - - - - - - - - - - - - - - - - - Image-recording Quality - - - - - - - - - - - - - - - A Picture Style- - - - - - - - - - - - - - - - - - - - Q Quick Control Screen - - - - - - - - - - - - - - Nomenclature - - - - - - - - - - - - - - - - - - - - - - Basic Zone Modes - - - - - - - - - - - - - - - - - - - D Using the Built-in Flash - - - - - - - - - - - - - - Creative Zone Modes - - - - - - - - - - - - - - - - - d: Program AE - - - - -
Quick Reference Guide Menu Operations button <0> button LCD monitor Cross keys 1. Press the button to display the menu. 2. Press the key to select a tab, then press the key to select the desired item. 3. Press <0> to display the setting. 4. After setting the item, press <0>.
Quick Reference Guide Image-recording Quality Select [1 Quality], then press <0>. Press the key to select the quality, then press <0>. Image-recording quality Recorded pixels Possible shots A Picture StyleN Press the button. Press the key to select the Picture Style, then press <0>. Style D Auto P Standard Q Portrait R Landscape V Monochrome Description Color tones optimized for the particular scene. Vivid colors and sharp images. Nice skin tones and slightly sharp images.
Quick Reference Guide Q Quick Control Press the button. The Quick Control screen will appear. Basic Zone Modes Shutter speed Shooting mode Creative Zone Modes Aperture Highlight tone priority ISO speed Flash exposure compensation Auto Lighting Optimizer Exposure compensation/ AEB setting Picture Style AF mode Built in flash function White balance Drive mode Image recording quality Metering mode In Basic Zone modes, the settable functions differ depending on the shooting mode.
Quick Reference Guide Nomenclature Power switch ISO speed setting button Mode Dial Flash button <6> Main Dial Shutter button Focus mode switch Live View shooting/ Movie shooting button AE lock button AF point selection button Cross keys Access lamp Aperture/Exposure compensation button <0> Setting button 309
Quick Reference Guide Shooting Settings Display Shutter speed Shooting mode Aperture ISO speed Exposure level indicator Auto Lighting Optimizer White balance Picture Style Built in flash func.
Quick Reference Guide Basic Zone Modes Ba sic Zo e n All the settings necessary for shooting are set automatically. You just press the shutter button, and the camera does the rest. A Scene Intelligent Auto 3 Landscape 7 Flash Off 4 Close-up C Creative Auto 5 Sports 2 Portrait 6 Night Portrait Pressing the button will display the Quick Control screen. In the C/2/3/4/5/6 shooting mode, press the key to select the function, then press the key or turn the <6> dial to set it as desired.
Quick Reference Guide Cre ati v Creative Zone Modes e ne Zo You can change the camera settings as desired to shoot in various ways. d: Program AE The camera automatically sets the shutter speed and aperture in the same way as the mode. Set the Mode Dial to . s: Shutter-priority AE Set the Mode Dial to . Turn the <6> dial to set the desired shutter speed, then focus the subject. The aperture will be set automatically.
Quick Reference Guide E: AF ModeN Set the lens focus mode switch to . Press the button. Press the key or turn the <6> dial to select the AF mode, then press <0>. S AF PointN X(One-Shot AF): For still subjects 9(AI Focus AF): Switches the AF mode automatically Z(AI Servo AF): For moving subjects Press the button. Press the key to select the AF point.
Quick Reference Guide Z: ISO SpeedN Press the button. Press the key or turn the <6> dial to select the ISO speed, then press <0>. When [AUTO] is selected, the ISO speed is set automatically. When you press the shutter button halfway, the ISO speed setting will be displayed. i Drive ModeN Press the button. Press the key or turn the <6> dial to select the drive mode, then press <0>.
Quick Reference Guide A Live View Shooting Press the button to display the Live View image. Press the shutter button halfway to focus. Press the shutter button completely to take the picture. Live View shooting settings will appear under the [2] menu tab in Basic Zone modes and under the [z] menu tab in Creative Zone modes. Battery Life with Live View Shooting Temperature At 23°C / 73°F No Flash Approx. 200 shots 50% Flash Use Approx.
Quick Reference Guide k Shooting Movies Set the Mode Dial to . Press the shutter button halfway to focus. Press the button to start shooting a movie. To stop movie shooting, press the button again.
Quick Reference Guide Image Playback y u Index y u Magnify S Select image x Playback C Shooting information L Erase 317
Index 10-sec. or 2-sec. delay ...................89 1280x720 ......................................150 1920x1080 ....................................150 1st-curtain sync.............................182 2nd-curtain sync ...........................182 4- or 9-image index display...........202 640x480 ........................................150 9-point AF auto selection ................85 A AC Adapter Kit ..............................260 Access lamp ...................................30 Accessories .........
Index Cleaning (Image sensor).......184, 187 Clear camera set ings ...................176 Close-ups........................................61 Color space (color reproduction range).............121 Color temperature .........................117 Color tone .....................................113 Continuous....................................170 Continuous shooting .......................88 Contrast ........................................113 Copyright information....................172 Creative Auto .......
Index Focusing AF mode.....................................83 AF point selection.......................85 AF-assist beam ..................86, 255 Beeper......................................166 Difficult-to-focus subjects....87, 135 Manual focusing .................87, 138 Out of focus ............38, 39, 87, 135 Recompose ................................53 Folder Create/Select.....................168 Format ............................................45 Format (card initialization) ..............
Index L Landscape ................................60, 82 Language selection.........................35 Large (Image-recording quality)......76 LCD monitor....................................15 Brightness adjustment ..............167 Image playback ..................71, 201 Menu screen.......................43, 270 Screen color .............................179 Shooting settings display......20, 47 Vari-Angle .............................31, 54 Lens ..........................................
Index My Menu .......................................258 N Neutral ............................................82 Night Portrait...................................63 Night scene...............................60, 63 No. ................................................170 Noise reduction High ISO speed ........................254 Long exposures........................253 Nomenclature .................................18 Non-Canon flash units ..................264 Normal (Image-recording quality) ...76 NTSC .
Index Shoot by ambience selection ..........65 Shoot by lighting or scene type.......68 Shooting information display.........226 Shooting mode................................22 A-DEP (Automatic Depth-of-Field AE)..101 Av (Aperture-priority AE) ............96 M (Manual exposure)..................99 P (Program AE) ..........................74 Tv (Shutter-priority AE)...............94 A (Scene Intelligent Auto) .......50 7 (Flash Off).............................55 C (Creative Auto) .....................
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.
Quick Start Guide Insert the battery. 1 2 Quick Reference Guide 3 Insert a SD card. White index Red index Attach the lens. Align the lens’ white or red index with the camera’s index in the matching color. Flip out the LCD monitor. 6 7 Image Playback y u y u Focus the subject. Aim the viewfinder center over the subject and press the shutter button halfway to autofocus. 8 Take the picture. 9 View the image. Press the shutter button completely to take the picture.
Shooting Operation Power switch ISO speed setting button Shutter speed Mode Dial Flash button <6> Main Dial Basic Zone Modes Aperture ISO speed Shooting mode Exposure level indicator Auto Lighting Optimizer White balance Picture Style Built-in flash func.
Canon •••
Just a snapshot? o it a chance to take tate-of-the-art pictures. Di er Canon Macro Len es ~-.
aero lenses let you approach small subjects and capture But that's not the only reason to use them. By making the most of Canon Macro Lenses, you can turn everyday scenes into dramatic photographs.
Cont'ent's Contents 04 Start enjoying your macro lens 20 Original ways to enjoy your photos 25 learn more about macro lenses 31 Canon's Macro lens lineup .
.-------------------------------,. • •• • •••• • •• • •• • •• • •• •• .- .~ ... ~"'i t .
Monday: "Afternoon teatime" n.r H........"". c.k.l wIt\. H.w .~.l4t • f.... 0'1 f••• rlt. - fn',lt t.rtl t.r,.l wtt" I141cl.141 kf..,H, ~114.~trrf'l, .Ml II• .." t14rM • t.ltl1 tr••t IMto It rk.t••r,.rtI4MltI1! 05 I r.!,~.
Sort en oy yo oy fre h attention to e ervd. \ ·jth an n 1aao Len . Ora r ac 0 s A thing If you think that macro lenses are just for enlarging images of small subjects or taking extreme close-ups. think again. A macro lens shows close-up pictures of ordinary subjects - revealing an unknown world! For example, you can take pictures of a colorful subject like a cake, using a blurred background for effect, and get striking professional-looking results t\o.
Tuesday: "Our Hero" TIo..n Ar. "'AM'1 (t.AI II1~jt(tl for ,nAt cleAr I.....,. rlo.otol - A d
y s the ubj t t nd out I rl a ain t blurr d b r undo t Macro lenses are ideal far taking portrait photos Since the subject stands out crisply against a hazy background, you can capture the whole scene in an attractive image. To create a beautifully blurred background, just choose the Av mode setting while keeping the aperture fully apen (for example, f/2.8 or an even lower f/number, depending on your lens) • lake full use of light for a«ractive background effect .
Wednesday: "Home garden" A rrttt\1 flow.r rtt.., ",itil tiM~ r..tM
• • tural ubj [ for m ro ho tin , I b miful urprt fl Rich color voriotions Amazing natural patterns. Flowers are the supreme subject of macro shoating and the ideal way to learn the basics of macro techniques. Only the close-up power of micro photography is really capable of revealing the tiniest detoils of petals, pistil, and stamens. Try using a calarful blurred background or a hazy dreamlike foreground to bring out the reality of this micro-scale world. Clever tool help creatc out tanding flO\ 'cr
Thursday: "Dad IS study" O..r t\.t I1t"rl, f""'''11 kttrl"ktl 10M,-tTtltl..r.l k.lrloo"'l Itt... to ,row 'M wom, rcfltrtlM' ltt, t"'OtIOM'" "tt"clo"'tMt "I "'til "I tlt,"Mlt. Yo.. C"M ..I' t\.. "..."z,IM, (",,,~I"tl'l of clol.-", ..."cTo Ikootl", to CArt'!rc t\.. I"~t of I"clo cI"lIl( o~j.rtl - t\.dr "..r" of 1.""11 .......oritl.
s. . nuqu r ealin in t111 m ro ra ubi rto n n. hero Len Why no take pictures 0 family an Iques, such as Dod's old watch ar camero 2 Yau can ma e full aelvan age of macro capabilities for clear de'ail and so blurring of unfocused fie ds, and a so emp asize aged exture and quali:y feeling In your Images Spend 0 little extra ,me finding the bes shoo ing ang e and lighting adjustmen to maximize highlightlng- af 9 ass or metal parts, so the antique oblec is really'presen " In the Image.
Friday: "Our watchdog II 1Y00f! H. ~an:.f jllft OM' at ftTa",.rr, t1<," r........llatcl'1 (tartl wa"i", kir tail. It'f karol to cOllllt OM kilO< for rrotutroll fro .... ~lIr,larL ~t k. olo.r "~nak tk. icc~ wrt1< .rrrtorl. Tkat' f Ol\r frhtloll'1 • ",at(~o,.
Sat e oy yo r macr Ie s Fwd cro len e from he d to t. ke detail d porn It of pet t. il. When you spend a lot of lime with pets you'll notice a surprising range of facial expressions. Macro lens close-ups can capture these changing looks at just the right moments, for memorable images to save and treasure. Try taking detailed pet pictures of fur or different parts of the body, using focus settings different from ordinary snapshots t~oto tlf Focu at pet's eye view.
Saturday: At the park" 1/ IMltctl cI'\lttnM, .ro'\d • ~OO ...rM /1olol....ll - I"ll"~'\,I, ~'\tttljH'I, llr" oM/1i'l - "'''M'' HV.I iM • tiM" Or'M Ir.e<. Yo,\ C.M rrr .11 (1., "ctlvit'1 iM u.1( 1....11 1oI0rtll loIiu.o14t "0 I'MI.
o r or 0 $ A' e U e high rna nification to e plore the hidd n b nd ddail of in t. ut) Use the zoom-in feature of Canon Macro lenses to photograph insects. You'll be amazed and captivated by the intricate structures and delicate extures against a beautiful natural background. Make full use of macro artistry to take shots of this micra world I In en are en ItJYe (Q ound and motion. Be careful not to care them awa,,! Be very qu'e' as you ge close to Insecls.
Sunday: "Small world, big dreams" T0~"11 "'''I " ko"~,,'1' "M~ " <0'111" c""" over to olllt. H, ~ro'l,kt k'i t"oor't, to'1 - " cI"fl'< """'"t\lrc c"r "'o~" tk"t ke t"kel "'kenocr ke ,0'1. HII ~re"", II to ~'1'1 tke re,,' c"r 10",,~,,'1 ""~ tr"od ,,11 oo,r tk' wort~ tM ,to WO'lI~II't '10'1 "ke to ,.
Sari e oy rg r rna r e'1s. orld of im in tion nd tak pi ture of it il '. Diorama shals usually require a lorge-scale pholo setup, but ii's easy with a macro lens. For instance, jusl put a beautiful scenic pholo in the background, and photograph a model against II The phola looks like you re really thereI tkoto t(r Camera erring play an important part in diorama photography. Select·Av Mode" for 0 camero exposure mode Try shoo 'ng from one angle wh, e changing the aperture of the lens.
.h ng Pi ture r Ie to (I") monochrome pi tore from col Canon digital SLR cameros make it possible to toke pictures in block and white or sepia tones. Monochrome (B/W) photography extends your shooting capabilities while preserving original detail. Just choose these options from the menu for easy set-up. Setting methods IEOS REBEL T3i / 600D ) - - - - .. .'. '. " ·· -. · .. . . ~ I 19 &, .. .
Photo lampshade Enjo} fa' ori[~ pi lure illuminal db· the flickering light of a candle flame. nd y u can a1 0 njo~ th fragr. nc of c nrcd ('andI Needed: F..vorln 21 ,~oto Print out a favorite photo and trim it to the same size as the outer circumference of a candleholder. Then roll the trimmed photo around the holder. You can choose ony kind of favorite shot - flowers landscapes, your child, or even your pet Then enjoy different moods by changing photo subjects.
o Recipe 9 0 w 5 e o p 0 5 • book . ....::: --.. ~ • -, • .. 0- ~ to ,ou \ LOoked. and add a little decoration h di and al me of e lUr pi ~ lin pp raJ< ori ina! r~ ipe ookbook )our ho t. oon \OU II h.n a mme/ou I ". - ur to be a a\orire ith ,\ Our fri nd Ne ed ed : ls Yo u'v e put all you r cul ina ry skil din ner , into a del icio us main course for ted cake and served a bea utif ully dec ora for dessert Wh y nol take spe cia l shots of .r AI~I4'" ~r• ..,(" , ~•• k r....11 r".t.
Photo stand - I taunt photo
Or'9' a ways a e."a your phol s • Desktop calendar ) 09 s... T~ "1\oa ~~ , 1. 3 "''''1'''' 11131<1,\<11 " to '1 It tl tL ~'ln"l> After you colle t a stack of favorite photos ju t mount tht:m on daled card to crt:ate an original calendar. That \ ay. you can enjo. fa\ orite photo~ throughout the pa ing. ·ear. ... Needed: o I MM " rlml (ottOM ,triM" ........ ...... ..... ..... . ,. rhoto of An oHractive calendar is a useful item thai's also important in your doily life.
Benefits of USM + inner focus Quie , fast autofocus action Wi h no expansion or cor> roc ion of the ens, Convenient for close-up 'tua lor When you want to photograph a smal animal or an insect, it's important 0 get close qUietly without scoring the subject. Canon Macro Lenses wi h USM and inner focus let you photograph sublects with quiet, rapid outofocus.
Full-time manual focus Fine-tune e focus w Useful at t ~e de In AF mode I ~e hese Noaa photography can only locus on a small area The impression cJ a F1d:;g,+,~ d1cn;Jes cJarotdt by rrdGng a smoI shift in the kx:using point Use autofocus fa- quick locus, and then fum the locus nng When you keep your attention on the viewfinder and firetune the locus, the difference In the finished phoIo will be immediately apparent.
Learn ,..ore about macro le'lses Tripod mount ring L..--....:....-_---=---00 se the veco {nonzonto ~o,"ng '5100 _ w e ewfi • ] de· Usef Ii at imes ,. e these Perhaps you shoot a horizontal composition, then feel like taking a similar photo in a verticol framing. With a regular tripod, the subject position through the viewfinder inevitably shifts and the photographer has to refocus from the start.
Hybrid IS advantages \-lybr d Image sla I z;rg technology s e: ec I,e m bo' IT'ccro and; andara shoo 9 .. . ' ' Hvb, ~ 5 perfer' '1 vor' oJ< t,Jotion In macro shooting, the closer you gel 10 your subject, the more likely you'll experience camera shake. Canon's new Hybrid 15 changes all that. It's on advanced image srobilizing lechnolagy thaI leis you Ioke clear, cJose.up macro photos even in casual situations without a tripod where camera shake is like~.
Learn more aboul macro lenses • Terms Who' ,sl52 IS is on oplicol image stob,l zJOg lechnology developed by Canon. A sensor in lhe lens de'ed> camero shake and compensol.. by mov'ng the IS uml. a Iloo' ng elelT'em in e lens Bent IIgh' reaching lhe lens IS corrected mere and de "ered to the Im09'"g plane. recording a shorp Imoge wi Ii e sho e e!feet. Who! is Hybnd 152 In slondo,d photography. 'ong e camero .ho ..
Canon's Macro Lens lineup Ideal comblno ion wIth EOS REBEL T31 / 600D EF-S60mm f/2.8 Macro USM S v· T E S ESE T ~ EnlOY macro ,hoollng any: me WI exce enl quality reproduction and a ghtwe,ghl campacl dellgn on, :0 on emy-l<>lJ,e VIewing ongle 0 1 96mm 135mm film eq"iYOlenlJ, you can use th" ..'solile macro lenl for a wide ronge of ,hoo"ng flU'po.... neluding lmoll flowell and obled'. porn-a,t, WIth blurred boc ground,. and andseapes The len' provide.
Canon's Macro Lens Itreup Anal ,I,.,., ze prOI r opt en • ophy EF 1OOmm f/2.8 Macro USM COOlpat.bI.... :h .."". [OS ..., .., tf1 ,moctO ,n>" 0 "'-,Ie fa, ~ • ..eeI I ,eprod..ct>on q'" Iy and ""'" 01 U>e The ..., hen 0 ew'ng ong. 0; l60mm 35m", "'lV'''''''.'1 OIl EO~ ~1lEJ. nil 6000 0!1d Sol dol rr.ooel5 .$0 users am coptute more deta b ~orr !oJ1her rzway tnon w. an Ef·S6OrIm 112 8 """clO USM leo, For ~ ng P""C""'" phoIo, on OPO"""" IT pod """"' :","0 """,,0'0IyJ help, ...... 'WI """Iy De•.....
seful info: •• Basic of macro photography •• • • This ratio expresses the relative size of the image, compared to the subject. The larger' e magnifico Ion rot o.
Terms • Control depth of Field, depending on how wide the aperture diaphragm is opened. Aper ure con rol'or deSlfed bee ground blurr'ng An apertlJre diapnragm is a mechanism thai can rals the amount of ligh enlerlng a camera raug t e lens By oa ushng e oaenrng at tne apertu
Canon
Canon
Taking too many fuzzy pictures? Canon IS * Lenses are the solution! 01
Nice shot! Or is it? When you enlarge your image, the print looks Fuzzy. Frustrating! But a common experience. In most cases, this occidental blurring is caused by camero shake - especially when shooting with a telephoto lens or at slow shutter speeds in dark places. Even if you try to stay still, the camero isn't perfectly steady in your hands when the shutter button is pressed. But now there's a great solution: Canon IS* Lenses. For beautifully clear, blur-free photos. With ease.
Day or night, indoors or outdoors.
Contents ------------------------------- • • • • • • • • Page 5 11 :OOAM / Zoo pictures Page 7 12:00PM / Kids in motion Page 9 2:00PM / Animal snapshots Page 11 7:00PM / Night shots Page 13 8:00PM / Indoor shots Page 15 9:00PM / Sleeping faces Page 17 Camera shake Page 25 IS Lens lineup ..
11:OOAM / Zoo pictures Most children love going to the zoo. Here's how to shoot "wild" pictures! Great shot! Can you get it? Photographing animals from afar takes good Hming and usually, super-telephoto lens. But don't worry! With a steady-shooting Canon IS Lens, there's no fear of blurry results. Even if you're not using a tripod. Picture problems Blurring is Virtually unavoidable when shooting distonl subjects with a telephoto lens (unlike a widEHlngle lens).
• 11 'OOAM I Zoo pIctures • • Trying 0 take snapshots of the animals, but bars get in the way? What 0 do? It's easy to get rid of distracting elements like cage bars - with a liHle know-how! 1 Simply se your lens to elephoto. 2. Choose he Av mode and hold he aperture as wide open os possible 3 Approoch the cage as close as safely possible and shoot Now, see how well the shot turns out. The cage bars are gone, and the onimols 100 like they're in the wild.
12:00PM / Kids in motion Your child is swinging, running, playing actively. Now you can capture pure energy in pictures! Kid won't slow down? Panning* technique is tricky, but worth trying. Just set a Canon IS lens to Mode 2 to correct vertical camero shake while taking pictures.
• 12 ,DOPM / Kids on molion • , Fast moving subject, slow background. How can you get good panning shots? If you know the optimal setting, panning techniques can get better results. Here's one example (with EF70-300mm f/4-5.6 IS USM): 1. Turn the IS function on and select IS Mode 2. 2. To Improve your success, shoot at around J 0Q-200mm (rather than an extreme 300mm telephoto setting) 3. Select the camera Tv exposure mode and 1/60 sec. shuffer speed. Select AI Servo AF os the autofocus mode 4.
2:00PM / Animal snapshots Turn a tiny creature into a great picture. Canon IS telephoto zoom makes it easy! You're in the park and a cute chipmunk is posing within range! You lower your camera and focus on its eyes. All set? No, you're not steady enough. You need a Conon IS Lens to stop camera shake - and even create a softly hazy background. Picture problems Be ore you blame your camero for poor results, toke a good look at your picture-to ing posture. Are you trying 0 shoo a low level while squa .
• 2:00PM / Animal snapsha', • .., , Great photo tips Catch that lit Ie chipmunk with telephoto in a beautifully blurred natural se ing. Here's how to take a charming picture and get an intentionally blurred background (using EF70-300mm F/4·5.6 IS USM): 1. Sel the lens as for as possible to the telephoto side (200-300mm), for the longest focusing distance. 2. Select the Av exposure mode and keep the aperture open, 3. Choose natural elements as a background - Rowers, gleams of sunligh on leaves, etc. 4.
7:00PM / Night shots f.-s. 58~:tV'!; I 1 S-"'''' Evening enchantment. Canon's standard IS Zoom Lens is ready for brilliant shots! As the sun sets and the dusk grows darker with every passing second, the city lights up with exciting possibilities for glamorous night shots. And you're ready to take dazzling handheld pictures with Canon's standard IS Zoom lens. Perfect! •. - Picture problems , ;.~I( . ~ l ~- =-,-:,?,'- ,. l-"-- .... ....1- l Hlr"C ,. I .... I 1I I ~. 'P' It.· ~-.:, .
• 7,ooPM / Nighl shols • How can you capture twilight scenes when the light changes each second? Simple! Just use the convenient AEB (Auto Exposure Bracketing) function in conjunction with on IS lens such as the EF-S15-85mm fj3.5-5.6 IS USM to generate three different brightness variations for a single shot. 1 Set the camero's drive mode to continuous shoo ing mode. 2 Set the camero's AEB adjustment to 2/3 in l·step incremen s. 3 Turn the IS function of the lens "on.
8:00PM / Indoor shots -~....:...-_-------_ .... '" ~ It's happy birthday time! Take pictures in low light without spoiling the mood. Low light? No flash? Don't be concerned - be inspired! Canon IS Lenses let you take full advantage of candlelight and other low light conditions to create breathtakingly beautiful indoor pictures in available illumination. On any occasion.
• BOOPM / Indoor shots _ Picture problems Dim ligh •didn't use Rosh, camero sha e, fuzzy photos... ere are so many excuses for lost photo opportvni 'es! But now. you don' hove a apologize any more because Canon IS lenses show oulstonding performance in many different kinds of .ndoor shoonng si alions Wi out a Roshl Cake, candles, and a child's ace. How can you capture it all beautifully - without a flash? Flash sametimes destroys the mood af a roam.
9:00PM / Sleeping faces A child falls asleep. Now, take pictures quietly without waking the sleeper! A child's expression when asleep is especially endearing. Canon IS lenses are the ideal choice to quietly capture these precious moments. Without distracting Rash or blurred images.
• 900PM / Sleeping foces _ Angles? Framing? How can you capture the best features of a well-loved face? Shooting angles really matter in photo composition, changing the whole nuance of expression. For example, here's how to use the EF-S 15-85mm f/3.5-5.6 IS USM: 1 Choose the Av mode for exposure and keep the aper1ure fully open 2 Turn the IS function of the lens "on." 3. Lower your camera to your child's eye level 4.
IS benefits When does camera shake tend to happen, and what causes it to occur? Perhaps you've encountered blurred images when enlarging pictures: photos that look fine in smaller postcord sizes oppear quite fuzzy at greater size. In fact, camero shake happens more frequently than you'd think. There are several reasons for occidental blurring.
• Co"..."o shake _ How do Canon IS Lenses repress blurring caused by camera shake? Canon IS lenses detect comera shake with a pair of built-in gyro sensors. shifting lens components in the direction of the vibration to counteract it and prevent blurring_ When the shutter button is pressed halfway while the IS function is on, compensation for camera shake is activated in just 0.5 secands_ Since the potential optical performance of the lens is optimized, you can capture beautiful images.
---------------------------------------------------\ In-lens image stabilizer design benefits Why is each individual lens optimized for shake correction? Each Conan IS lens has a unique optical design for specialized performonce. So, Canon's optical correction systems and control mechanisms are customized for effective positioning in each lens model. Canon builds these mechanisms into the lenses to ensure that the optical correction system is optimized for each individual lens.
• Co",e'o sho e _ How does a stable viewfinder image help you take better picture? Looking into the viewfinder while Focusing and Framing is essential to SLR shooting, so a stable viewfinder image is crucial. Conan IS Lenses correct for camero shake by shifting certain optical components in inverse relation to the lens movement, maintaining the position of incoming light rays on the film or capturing elements.
In-lens image sta bi Iizer desig n benefits Improve your framing accuracy! Blurry viewfinder images lead to Framing errors, so you con inodvertently cut off important details, especially when using a telephoto zoom lens. With Conon IS lenses such framing errors are a thing of the post. Canon's in·lens image stabilizers enable accurate Framing when you fill the Frome with port of your subject. Since the viewfinder image is blur-Free, you can check every detail and make subrle Framing adjustments.
• Camero sha e _ Capture fleeting photo opportunities! Concentrating on your subject is difficult if the viewfinder image is blurred. When you lose concentration, you tend to miss small gestures and other momentary pholo occasions. Canon's inlens image stabilizer gives you a clear viewfinder image, so iI's easier fa notice and capture such photo opportunities. a Canon IS Lenses help here..
Background information: A new IS lens for macro What is Hybrid IS? Macro photography involves shooting close-ups of subjects, including Rowers, insects, and jewelry. Until recently, however, there was no technology that could compensate for the type of camero shake common to macro photog ropy.
• Camero S 0 e _ photography The bene ts 01 Hybrid IS There ore two rypes of comero sha e Ihat can negatively affect image qualiry· angle camero sha e and shift camero shake. Conventional Conan IS technology incorporales 0 vibration gyro (ongular speed sensa~ to compensate for angle camero sha e. This is on excellent solution lor masl rypes of photography, but provides insufficient image stabilization for macro pho ography, which is highly susceptible 10 shift camera shake.
Product overview Beautifully designed standard zoom lens realizes high image quality and easy operability. EF-S15-85mm f/3.5-5.6IS USM _..:-'": =h •. ~ 1 This sandard zoom lens, special~ designed or EOS 70 and EOS REBEL T3i/6000' but also compatible with all cameras designed to to e Ef·S lenses, covers ocallengths ranging from 24mm raugh 136mm in the 35mm ormal.
• IS lens lineup _ Single focal-length lenses .~ _ EF200mm 1/2llS USM .1II'IS~7~ 0.3 ........... ~iN~- ~ ....v.:. •• q- EF300mm f/dllS USM EF300mm f/2 8llS II USM EFdDOmm lId DO IS USM EF500mm f/.1l1S II USM EF600mm IIdllS II USM EF8oo",m f/5.6lIS USM Zoom lenses ~. _ EF·S 17-55",m 12 8 IS USM EF·S17·85m Fd-5.
Canon E '0 Prt"!eQ En J3+,.
Canon Your Guide to Better photos Flash Classroom ",em orClble moments at h . \ nolOS - ome captured in beClul1ful ~ ---~ -----
Day or night capture precious moments at home in natural-looking photos. Shoot beoutiful photos with 'elS'_ Accent the n4tur4l (" Clmbi'~:~:~ you.r ) ~ @ External flash empowers you with the means to dramatically improve photos. fry it and see everyday life transformed into rich. photogenic imagery. fhe essence of precious moments in time. preserved in vivid photos you will cherish for years. Delight and surprise with the magic of external flash.
~ -:-,. - .--;, . ....... ---_....
contentsJ My home '--''-''<'' / 03 Contents Oil flash techniques 25 Shooting tips 27 Recommended Canon Speedlites 28 Other flash functions \ ---~'~ "?; -::r .,-MY camero. Keys to Better flash Photography lhrn Flash IlOunCfd on MOO AIsh bounced otlllA' Bounce flash flash pointed directly at Q sub jett produces harsh. WlnQtural light. An tXttrnGl flosh lUlit. however, however. gives you the freedom to point flash at \NGlIs or ceilings to reflect (or ~b(M.lnce~) light from the flash.
Make your home photos shine. EaSY! Flash techniques ~ I'iZiIU Sumptuous cuisine ~ ...
My Home Photo . . @ Cuisine Three star cafe ShootIng d.lIti; d.lItt; Ef-S 60mm 112 8 ~ USM ·1/80 SIt. ·114 5· ISO 100' we AuIO Increase exposure compensation 10 give food a fresh look. Photographing food served on white dJshtS can produCl drab. anoppetiting results. To avotd thi$. simply incrt4SC oposurc cOmplnSCltion. Your food photos will havc instant _ I witfl witII • fresh. ""'fIuGlIS loak.
ieatime, day or nighl! Side lighting gives food (1 r \ temptingly delicious look. When shoaling food and sweels. lighl from the side or diagonally from the bock. The flexibility afforded by external flash leIs you create Ihe charming ambience of a core terrace at teolime. even 01 night! lSuilt-in flash I p, v Dork. 9toom1 Nck9rouncl UMGtvral shadow _.A::'-_-' unclft' dish ~ like window light. bounce flash produces a 14'fout and ft4Sh positi n bright.
Off-cam.ra flash. gr.at lighting! KEY P011r11" fwo lights reveal the appetiting color and sheen of fine cuisine. freshl.,. cook.d food has a uniqu. sh••n Ihat adds 10 app.al. 10 captur. this look. tr'f using two flash units - on' for ov.rall brightn.ss and th. oth.r to produc. a nic. sh••n. Ev.n hom. dishes will look lik. cuisin. from a gr.al r.staurant! SIloot.-.g . . EHl"'S5trIa 113 ~!l.61S 01110 Nt..
M'/ 1I0"'~ Pholo @ CUISIne -i Built-in flash) pOln' nash at cutting boo.rd J Arrllng.m.nt lost in ITIIIddy colol1: rrll$h. frll$h. apptfiting llpplCll miuirt9 ~ Add a tantaliling accent with the camera's built-in flash! Ldyout Qnd flash posit Bounc••xlernol flash 10 produc. Ih. ov.roll lighling. and us. Ih. camero's buill-in flash 10 odd a d.licious sh.en 10 marinades and olher dishes. If Ih.r. is no nearby wall. bounce exlernal flash off a while culling board.
My Home Photo . . @ Veranda I I Slovv life 5/lootJrlg dW. EF-S llJ.l:J5mm 113 5-5 615' llSO sec. '115.6 • ISO 100· WB.
~ Sub ject in shode. sunny ond bright! l r A little ingenuity is all it takes to create your own sunshine. Verondas filled with lush folioge look best in sunshine. Externol flosh provides the meanS to creote 0 sunlit atmosphere. giving shaded greenery 0 bright. refreshing look. -{ Built-in flash I flat. ortincial looking I,aves 14yout and flash position ~ Capture the feeling of natural sunlight with bounce flash! Add 0 feeling of bright sunlight by bouncing f10sh off 0 1'1011.
Close-ups of flowers. delicate and fine! ShoolIno dau EF-SIOrrn 112.1 Mco USN' O,IIe.
Io\y +10'" ,hoto . . @ Veranda t'§~ Enhance the beauty of flowers with the magic of light. Capluring Ihe nalural color and form of flora can be difficult when shooting close-ups. You can easily solve this problem by positioning the flash off-camera. [Built-in flash I , v No ~ n.sn d"!lO""lIj from back due to Clb$fnCeof I14turaHootift9 ......... flowm -nooti", irl air- due to block backgrouMl ~ Diagonal back lighting gives flowers a fresh.
Works of) art • SfIoobng daL EF-S la-l35mm 113.5-5 lIS '1/&0 _ 11....5 • ISO QI. WB MInuII Use bounce fl4Sh to shoot framed pictures. fr.'llfd pictarlS art diffie.1t to phologrGf'h with bailt-i. nash .... to 1;,IIt ,onocti", off tho 914$$0 Ioonc. flash avoids this probl'M, vastly ra.:ing distracmg ron-. O,j II(i, "l1i::1 ,,1.'..f!.
Light and shadow. stunning photos! I\ Create a digital scrapbook of kids' creati~e moments. Those precious creative gems that all children make Can disappear or become damaged over the years. A digital scrapbook containing photos of this very special artwork is a great way to preserve fond memories. l8uilt-in flash I v otstroct...
Arts and crafts. collector's edition! ~Gna.. Ef·SlI-1J5lMlIl3S-SIIS· loW). '1i,6'l$OlIOO'W8 Auto Combine external flash bounced off ceiling with built-in flash for large items. It"'" bounclld off tile ,tit;" creates soli light that ,....... brHd arlO. makin' it idlol for shoetin9 torgt it'MS or orron9f1lttnts of many SMail rttMs. Whtn used off~CGmlTo will> baill-in photos , _ to I~. will> vivid CUld • natural ..... aI dtptl>. _--_~ n""'.
""1 .,.. rho•• . . "o~b., Room • Showcase your finest creations around the world. Sharin9 Shoring photos of crafls on the web or collectin9 collecting them in albums is a satisfyin9 satisfying experience anyone can enjoy. A little extra attention to !i9htin9 lighting is all it tokes to make crafls and artwork look their best. (Built-in flosh 1 v ~ Proper lighting is key to reolistic looking model photos. layout ond nosh position Position external flash off-camero and bounce off the ceilins. ceiling.
My Home Photo ~ @ Garden I Smile! >~ •.6.1- 0Ma. Ef SOmm V1811' 11250 SIC .1/5 6· ISO 800' WB AWl Combine bounce flClSh with built-in flClSh when photographing people indoors. Bocmcing "'1."..1 flash off the ceiling bol"" both peopl. and sarroondings in ..turdl-looking light similar to window light. In addijion. the camtrG's built~in nash creates a bright catch INctv, ""'!IIlic "",gelic look. light in ..,.. for • INctv.
r retching smiles. \ lovely backgrounds! Brighten facial expressions with external flash during the day! External flash can be used during the day for a wide variety of situations. such as eliminating shadows on a subject and brightening cute faces. rhe flexibility of external flash also lets you control background blur to frame smiling subjects. [Without flash 1 v Oart. f4'. del.
M)' Home photo . . @ Pets Adorable pets ~ SlllloItJe lSI&I EF-S I&-S5InnI v.l H' IS- 1150 _ - V.U-ISO 100 - WI . . Use external flash for enchanting aqWlrium shots. ,hotographin9 fish in (In 4n aquarium with builHn nash is dork.lt due to 1i9ht rtflll
r Adoroble pets, \ soft ond cuddly! Capture capture tne soft warmtn of adorable pets. Built-in flosh con't 'luite coplure the feel of your pet's soft. downy fur. But with external flosh, your pet photos come olive with 0 cuddly warmth you Can almost feel. ~ Bounce flash makes pet photos look more natural! Photogroph pets with bounce f10sh for photos thot show pets os cute ond lovoble as they ore in reol life.
My Mome Photo . . @ Private Room DaIl Ef-S ~ tr.! llAXro LlSIoI- 1150 lilt 21 Personal treasur 'IJ~ 5 -ISO 100' WI ....
r es Personal items. \ premium Look! .~ Side lighting accentuates metallic finish and adds depth. When shooting for blogs or online auctions, you'll wont products to look their best. Experiment with different lighting angles and see the difference a little extra effort makes. ISuilt-in flash 1 v btrrnl1l nosh f ell. Q flAsh diffll$rd with tread"g pClpff 110 Mtt4ltic 1ft'! (ab$ac. of rtflcHons). 110 depth ~ utility layout and makes product photography 0.
How to use off-camera flash I Canon Speedlites COn be connected to EOS cameros either wirelessly or via extension f10sh cord. fhis offers a great deal of fleXibility in choosing flosh plocement. the end result being easier creative expression and more beautiful photos! I Wireless Speedlites" The wireless capability of these Speedlites - when used with compatible EOS cameros - gives you a greot deal of freedom in flash plocement. expanding creative possibilities for stunning photographs.
.' o~' • .I.i .f.• , • .I.i o .\; .I.i o o , .I.i • .I.i o .f., .f,; .I.i , , I.i , .I.i o ~ .f. .... o , o ..p " .I.i o ...•' .I.i • ...., ...." .I.i, • , , .... , ....• • .I.i .I.i • •I.i • .I.i .I.i -.}'" .... o , I.i o .I.i .I.i o ~ • .I.i • ,l) •I.i o .I.i • ~' o , .I.i • ~ •I.i • .\; • .I.i o •I.i ...,' • f. .\; • .I.i , .I.i .I.i , .I.i , • , • , • .C • .c • ..',..' .I.i • .I.i .• . , • •f,} , .f,} , " .I.i o .c, , .
. .. . • ... . . . •• . Basic flash knowledge learn how to control brightness Adjust exposure compensation or flash intensity There are two ways to control brightness when shooting with flash: You can adjust either exposure compensation or flash intensity. Adjusting exposure compensation changes brightness over the entire photo. with the subject and background equally affected by any adjustments you make. On the other hand.
.. • . .. . • .. •• Eliminating shadows caused by strong backlight during the day oaylight sync and high-speed sync When photographing a strongly backlit subject or wh.n the subject is in shod. and you wont to ..oid background whit.out. use doylight sync. This us.s light from th. f10sh to bright.n shadows, .ffectively balancing subject and background brightness. Since most externIII flash units produce fairly strong light. they co.n reach distant subjects and allow uS, of huge f-numbers. However.
• . .... Other flash functions Slow sync This function uses a slow shutter speed with flash. The end result is a photo that combines a foreground lit by flash with a background lit using the scene's e.isting light, with both properly exposed. liotr. USt of 0 tripod is rccOlllrncnOtd to p1'fVltnf !JdckgrOCUld blur. Rear curtain sync and front curtain sync Slow sync can be used to express motion and has Iwo options. depending on Ihe Scene and type of movement.
,. Recommended Canon Speedlites Speedlites speedlite 580EX II canon's flogship flash un". Meets the d.monds of professionol photosroph.rs. • SIlt 76x137 x 117 mm/ 30 l 5 4 l 4 6 lOCh ('lcludJIIg Gust· mel cnp-proal adapler) • WetOht 405 gll4 3 Ol (apprOJl ucludlllQ ban,ry) • Power SOIltce Fool ""-SIll! alJca~ne, Irtl\lum or Nl-MH blllwes Speedlite 1I30EX II ~ I - I - .• Powerful unit provid.s ompl. IiSht. Supports wirel.ss use. • SIn nll 122 It 101 mmJ 2 ax u ...
.... .. . .. .. .. Recommended Canon Speedlites Accessories Speedlite Transmitter ST-E2 Allaches to EOS and allows wireless control of Speedlile S80EX II and Speedlile Q30EX II. liot.: EOS 70 aM EOS 600 MY' th. scm. runctionality builHn. Off-Camera Shoe Cord OC-E3 Allows an exlernal flash unit 10 be posilioned off-camera. Cord length is approx. 60 cml 2 fl.
•• • • . ~ \ Common household items make ~ great lighting accessories. When shooting with flash. try some of these common household items to heighten creative expression. Whit. culli"9 board and drawing p4per Colored cellophan. r r---I;""---fil----:~I ,Bounce f1cuh oFf oth'r $urfocts brstdn 0 wall or uiling. Simply bounet off 4 pilei of pol'''" or hI" 4 whit. cutting board. raper towel and tracing paper Colored ull",""'" Direct the flosh through colorld "Hophon. to simulot. th.
canon £·1 PmlId lit JacrrIll CTOol11l).
canon EOS DIGITAL Solution Disk ver.24.0 For Macintosh For Windows Clonon Utilliles: Oigiui I'tloIo ProImionolllO c.non Vtilitl." Dlg~1 Photo I'roffl$ionlll Imag~8'oww' 6.7 loomB'<>W>erEX 6.1 EOS Utility 2.10 EOSUtility2.10 f't>otoStitch 3.1 Pi(tu'e Style EditOlI.! [OS s.>mple Mum PhotoStil(h 3.2 Picture Style Editor 1.9 [OS s.>mple M~j( I III I I IIIIIIIUIIIIIIIII III C53-00n-02 3.
Visit www.registercanon.com to register your new EOS camera today and receive the following*: • Automatic notification of firmware and software updates • Priority telephone support • Exclusive priority e-mail support address • Exclusive savings on select products, classes and workshops There is no charge to register or for the benefits offered. * These benefits valid in the U.S. only. Please read the Terms and Conditions at www.registercanon.com for complete details.
Tryllltll Pliot:o Your Images Printed Free From concept to print, the professional's choice is Canon. Have your images printed on a professional model for free. * * Please refer to the Try My Photo website Terms & Conditions.
"'o'" CaIII 'II Dealer Record of Canon Purchase Fiche d'Achat ur Concesslonnaire Canon , CallOll Complete this card at time of sale.
Calloll CANON@ EF Lens and Accessories Limited WarrantyFor U.S.A. & Canada Only The limited warranty sel forth below is given by Canon U.S,A" Inc. (Canon U.S.A.) in the United States or Canon Canada. Inc. (Canon Canada) in Canada with respect to the Canon brand EF Lens, as well as with respect 10 the accessories packaged with this limited warranty (collectively the "Products"). when purchased and used in the United States or Canada The Products are the only Products to which this limited warranty applies.
Call0ll Garantie limitee des pbjectifs EF et des accessoires de CANON@ Pour les Etats-Unis et Ie Canada seulement La pflasente garantie limilee est lournie par Canon U.S.A.. Inc. (Canon U.S.A.) aux Etats-Unis ou Canon Canada, Inc. (Canon Canada) au Canada a regard des objectifs EF de marque Canon. des accessoires livres avec oone garantie limitee (colleclivement les « produits ,,), lorsqu'ils sont achetes el utilises aux Etats-Unis ou au Canada.
Calion Canon U.S.A. You may obtain technical support for your Products as follows: • Internet support at www.usa.canon.com/support (E-mail support also available) • Telephone assistance tram a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1·800·0K·CANON (1-800-652-2666). Canon Canada You may obtain technical support for your Products as follows: • Internet support for English at www.canon.
Canon CANON EOS Digital Camera™ and Accessories Limited WarrantyFor U.S.A, & Canada Only The limited warranty sel tanh below is given by Canon U.SA, loc. (CallOn U.S.A.) in the Unrted States 0' Canon Canada Inc. (Canon Canada) in Canada with raspec! to the CaMn brand EOS Digital Camera, as well as with respect to the accessories packaged with this limited warranty (COllectively the ·Prod..
Canon Garant" limit.. des apparalls photo numenques EOS Digital Camera' at des accasso"es da CANON Pour les Etats·Ums at Ie Canada seulament La presente garanlie limitee eSI toumoe pal Canon U.S...... Inc. (Canoo U.s ..... ) aux Etals·UniS ou Caoon Cana<.la Inc (Canon Canada) au Canada al'egard de rappareil pholo numerique EOS de marque Canon, des accessoi'es liv'es avec cene 9l\rantie lim~&e (colleclivemernles. produits ~)'.