Owner's Manual

Turning
on
the Power Switch
About
Quick Flash
1
Set
the power switch to
<ON>
.
...,.
The flash recycling starts.
2 Check that the
flash
is
ready.
•
When the flash-ready lamp blinks and
then
lights
in
red,
the
flash
is
ready
to
fire
(fully
charged).
The flash-ready lamp blinks when Quick Flash
is
ready even before the
flash is
fully
charged.
·
You
can use the flash to take a picture at that time; however, the flash
output
is
only half or one-third
of
the flash's full charge. This is useful for
taking pictures
of
subjects very close to the flash.
About Auto Power.
Off
To
save battery power, the power will
turn off
automatically after 90
seconds
of
idle use.
To
turn
on
the Speedlite again, press the camera's
shutter button halfway.
[ll
•
The
time
until auto power
off takes effect may increase
when
firing
continuous flashes.
•
Auto
power off
can
also
be
disabled
(p.32).
10