User Manual

229
k Shooting Movies
You can manually set the shutter speed, aperture, and ISO speed for
movie shooting. Using manual exposure to shoot movies is for
advanced users.
1
Set the shooting mode to <a>.
Press the < W > button and turn the
<
6 > or < 5 > dial to select < a >.
2
Set the ISO speed.
Press the <i> button.
X The ISO speed setting screen will
appear on the LCD monitor.
Turn the <6>
or < 5 > dial to set the
ISO speed.
For details on the ISO speed, see the
next page.
3
Set the shutter speed and aperture.
Press the shutter button halfway and
check the exposure level indicator.
To set the shutter speed, turn the
<
6 > dial. The settable shutter speeds
depend on the frame rate <
9 >.
• 6 5 4 : 1/4000 sec. - 1/30 sec.
• 8 7 : 1/4000 sec. - 1/60 sec.
To set the aperture, turn the < 5 > dial.
If you cannot set the shutter speed or
aperture, set the power switch to
<1>, then turn the <6> or <5>
dial.
4
Focus and shoot the movie.
The procedure is the same as steps 2
and 3 for “Autoexposure Shooting”
(p.225).
Manual Exposure Shooting
Shutter speed
Aperture
COPY