Advanced User Guide E CT2-D186-A © CANON INC.
Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Supplemental Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Compatible Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Instruction Manuals. . . . . . . . . . . . . . . . . . . . . . .
Smooth Skin Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Group Photo Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Landscape Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Panoramic Shot Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Sports Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual Exposure Compensation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 Exposure Lock (AE Lock). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 ISO Speed Settings for Still Photos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 HDR Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 HDR Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Metering Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 Display Simulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 Optical Viewfinder Simulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317 Shooting Information Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 Reverse Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Servo AF Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475 Customizing AF Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486 Selecting the Drive Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498 Using the Self-Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501 Remote Control Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resuming from Previous Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621 Browsing Images with the Main Dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 622 Customizing Playback Information Display. . . . . . . . . . . . . . . . . . . . . . . . . . 624 Displaying the Highlight Alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 628 AF Point Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 757 Wireless Communication Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 Tab Menus: Set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 761 Folder Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Custom Functions/My Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 816 Tab Menus: Custom Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 817 Custom Function Setting Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820 Tab Menus: My Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846 Registering My Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Before starting to shoot, be sure to read the following To avoid shooting problems and accidents, first read the Safety Instructions and Handling Precautions. Also read this Advanced User Guide carefully to ensure that you use the camera correctly. Take some test shots, and understand about product liability After shooting, play images back and check whether they have been properly recorded.
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your dealer. Camera (with body cap (Camera Cover R-F-5) and shoe cover) Battery Pack LP-E17 (with protective cover) Battery Charger LC-E17/LC-E17E* Strap * Battery Charger LC-E17 or LC-E17E is provided. (The LC-E17E comes with a power cord.) The camera does not come with a memory card ( ), interface cable, or HDMI cable. If you purchased a Lens Kit, check that the lenses are included.
Caution When you need Lens Instruction Manuals, download them from the Canon website ( ). Lens Instruction Manuals (PDF files) are for lenses sold separately, and when a lens kit is purchased, some accessories included with the lens may not match those listed in the Lens Instruction Manual.
Supplemental Information Refer to the following website for information on lenses compatible with camera features, and for supplemental information about the camera. https://cam.start.
Compatible Accessories Check the following website for details on compatible accessories. https://cam.start.
Instruction Manuals The included Instruction Manual provides basic camera instructions. Advanced User Guide Complete instructions are provided in this Advanced User Guide. For the latest Advanced User Guide, refer to the following website. https://cam.start.canon/C006/ Lens/Software Instruction Manual Download from the following website and refer to the supplemental information. https://cam.start.canon/ Note Select [ : Manual/software URL] to display the QR code on the camera screen.
Quick Start Guide 1. Insert the battery ( ). Upon purchase, charge the battery to start using ( 2. Insert the card ( ). ). Insert the card with the label facing the back of the camera until it clicks into place.
3. Attach the lens ( ). Align the red mount index on the lens with the red mount index on the camera to attach the lens. 4. Set the focus mode to < >( 5. Set the power switch to < < >( , ). >, then set the Mode dial to ). All the necessary camera settings is set automatically.
6. Flip out the screen ( ). When the date/time/zone setting screen is displayed, see Date/Time/ Zone. 7. Focus on the subject ( ). A tracking frame [ ] for AF appears over any face detected. Press the shutter button halfway, and the camera will focus on the subject. If < > blinks on the screen, manually raise the built-in flash. 8. Take the picture ( ). Press the shutter button completely to take the picture.
9. Review the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To display the image again, press the < > button ( ).
About This Guide Icons in This Guide Basic Assumptions for Operational Instructions and Sample Photos Icons in This Guide < > Indicates the Main dial. < > Indicates the Quick control dial. < < Indicates the Multi-controller. > >< >< < > < > < > Indicates the direction to press the cross keys (< >). Indicates the lens control ring. Indicates the Quick Control/Set button.
Basic Assumptions for Operational Instructions and Sample Photos Before following any instructions, make sure the power switch is set to < >( ) and the Multi-function lock feature is off ( ). It is assumed that all the menu settings and Custom Functions are set to their defaults. Illustrations in this guide show the camera with the RF-S18-45mm F4.5-6.3 IS STM lens attached as an example. The sample photos displayed on the camera and used in this guide are for instructional purposes only.
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( ). SD/SDHC/SDXC memory cards UHS-II and UHS-I cards compatible Cards That Can Record Movies When recording movies, use a card with ample performance (fast enough writing and reading speeds) for the movie recording size ( ).
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children. A strap wrapped around a person's neck may result in strangulation. The parts or provided items of cameras or accessories are dangerous if swallowed. If swallowed, seek immediate medical assistance.
Observe the following instructions when using a battery charger or AC adapter. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. • Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other metal objects.
CAUTION: Follow the cautions below. Otherwise physical injury or property damage may result. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a while before resuming use. Flash emits high temperatures when fired.
Handling Precautions Camera care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If the camera gets wet, contact a Canon Service Center immediately. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Attach the lens cap to prevent direct sunlight and other light from entering the lens when you are not shooting.
Screen and viewfinder The following does not affect images captured by the camera. Although the screen and viewfinder are manufactured with very high precision technology with over 99.99% effective pixels, 0.01% or fewer of the pixels may be dead, and there may also be spots of black, red, or other colors. This is not a malfunction. If the screen is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Smudges on the image sensor Besides dust entering the camera from outside, in rare cases, lubricant from the camera's internal parts may adhere to the front of the sensor. If smudges are visible on images, have the sensor cleaned by a nearest Canon Service Center.
Part Names Attaching the Strap (13) (14) (15) (1) (2) (3) (4) (5) (6) (7) (16) (17) (18) (19) (20) (8) (21) (22) (9) (10) (11) (12) (27) (23) (24) (25) (26) (28) (29) (30) (31) (33) 30 (32)
(1) Mode dial (2) < (3) < > Multi-function lock button > Main dial (4) < (5) Shutter button > Multi-function button (6) Movie shooting button (7) AF-assist beam/red-eye reduction/self-timer/remote control lamp (8) Grip (9) Depth-of-field preview button (10) Focus mode switch (11) Contacts (12) Lens mount (13) Built-in flash (14) Microphone (15) Speaker (16) < (17) Strap mount (18) RF lens mount index (19) Image sensor (20) Lens release button (21) Lens lock pin (2
(6) (1) (2) (3) (7) (8) (4) (9) (10) (5) (11) (17) (18) (12) (13) (19) (20) (21) (22) (14) (15) (16) 32
(1) Flash sync contacts (2) Multi-function shoe (3) Viewfinder eyepiece > Menu button (4) < (5) Screen (6) < (7) < (8) < > AF start button (9) < > Multi-controller (can also be pressed straight in) (10) Viewfinder sensor (11) DC cord hole > Quick control dial / > Power switch > Info button (12) < (13) < > Quick Control/Set button (14) < / (15) < / / > Left/drive mode/self-timer selection button > Down/erase button (16) < > Playback button (17) < > AE lock button
Mode dial The Mode dial is divided into Basic Zone and Creative Zone modes. (1) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting.
(2) Creative Zone These modes give you more control for shooting various subjects as desired. Flexible-priority AE Program AE Shutter-priority AE Aperture-priority AE Manual exposure Long (bulb) exposures (3) Custom shooting modes You can assign < >, < functions, and more to < >, < > or < >, < >, < > ( ). (4) Movie recording For a variety of movie recording ( ).
Battery Charger LC-E17 Charger for Battery Pack LP-E17 ( (1) Power plug (2) Charge lamp (3) Full-charge lamp (4) Battery slots ). Battery Charger LC-E17E Charger for Battery Pack LP-E17 ( (1) Power cord socket (2) Charge lamp (3) Full-charge lamp (4) Battery pack slot (5) Power cord ).
Attaching the Strap Pass the end of the strap through the strap mount from the bottom, then pass it through the strap buckle as shown. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Software Software Overview Downloading and Installing EOS Software or Other Dedicated Software Software Instruction Manuals Software Overview This section summarizes software used with EOS cameras. Note that downloading and installing the software requires an internet connection. The software cannot be downloaded or installed in environments without an internet connection.
Downloading and Installing EOS Software or Other Dedicated Software Always install the latest version of the software. Update any previous versions that are installed by overwriting them with the latest version. Caution Do not connect the camera to a computer before you install the software. The software will not be installed correctly. The software cannot be installed unless the computer is connected to the internet. Previous versions cannot display images from this camera correctly.
1. Download the software. Connect to the internet from a computer and access the following Canon website. https://cam.start.canon/ Select your country or region of residence and download the software. Depending on the software, you may need to enter the camera's serial number. The serial number is on the bottom of the camera. Decompress it on the computer. For Windows Click the displayed installer file to start the installer. For macOS A dmg file will be created and displayed.
Software Instruction Manuals Check the following website for software instruction manuals. https://cam.start.
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.
Charging the Battery 1. Detach the protective cover provided with the battery. 2. Fully insert the battery into the charger. Do the opposite to remove the battery.
3. Charge the battery. LC-E17 Flip out the charger prongs as shown and plug the charger into a power outlet. LC-E17E Connect the power cord to the charger and insert the plug into a power outlet. Charging starts automatically and the charge lamp (1) lights up in orange. When the battery is fully charged, the full-charge lamp (2) will light up in green. Charging a depleted battery takes approx. 2 hr. at room temperature (23°C/73°F).
Charge the battery on the day before or on the day it is to be used. Charged batteries gradually lose their charge, even when they are not used. After charging the battery, remove it and disconnect the charger from the power outlet. When not using the camera, remove the battery. If the battery is left in the camera for a prolonged period, a small amount of power current will keep being released, resulting in excess discharge and shorter battery life. Store the battery with the protective cover attached.
Inserting/Removing the Battery and Card Insertion Formatting the Card Removal Insert a fully charged Battery Pack LP-E17 and card in the camera. The captured images are recorded onto the card. Insertion 1. Slide the card/battery compartment cover lock and open the cover. 2. Insert the battery. Insert the end with the electrical contacts. Insert the battery until it locks in place.
3. Insert the card. Insert the card with the label facing the back of the camera until it clicks into place. Caution Make sure the card's write-protect switch (1) is set upward to enable writing and erasing. 4. Close the cover. Press the cover until it snaps shut. Caution You cannot use batteries other than the Battery Pack LP-E17.
Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( ).
Removal 1. Slide the card/battery compartment cover lock and open the cover. Set the power switch to < >. Make sure the access lamp (1) is off before opening the card/ battery compartment cover. If [Saving...] is displayed on the screen, close the cover. 2. Removing the battery. Press the battery lock lever as shown by the arrow and remove the battery. To prevent short-circuits, always attach the included protective cover ( ) to the battery.
3. Remove the card. Gently push in the card, then let it go to eject. Pull the card straight out, then close the cover. Caution Do not remove cards immediately after a red [ ] icon is displayed as you are shooting. Cards may be hot, due to high internal camera temperature. Set the power switch to < > and stop shooting for a while before removing cards. Removing hot cards immediately after shooting may cause you to drop and damage them. Be careful when removing cards.
Caution When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card/battery compartment cover. To avoid corrupting image data or damaging cards or the camera, never do any of the following while the access lamp is lit or blinking. • Removing the card. • Removing the battery. • Shaking or striking the camera.
Using the Screen You can change the direction and angle of the screen. 1. Flip out the screen. 2. Rotate the screen. When the screen is out, you can tilt it up or down or rotate it to face the subject. Indicated angles are only approximate. 3. Face it toward you. Normally, use the camera with the screen facing you.
Caution Avoid forcing the screen into position as you rotate it, which puts undue pressure on the hinge. When a cable is connected to a camera terminal, the rotation angle range of the flipped-out screen will be limited. Note Keep the screen closed and facing the camera body when the camera is not in use. You can protect the screen. A mirror image (right/left reversed) of subjects is displayed when the screen faces subjects in front of the camera.
Turning on the Power Setting the Date, Time, and Time Zone Changing the Interface Language Automatic Sensor Cleaning Battery Level Indicator < > The camera turns on. You can now shoot still photos and record movies. < > The camera is turned off and does not function. Set the power switch to this position when not using the camera. Note If you set the power switch to < > while an image is being recorded to the card, [Saving...] will be displayed and the power will turn off after the recording finishes.
Changing the Interface Language To change the interface language, see Language.
Automatic Sensor Cleaning Whenever the power switch is set to < >, the sensor is cleaned automatically (which may make a faint sound). During the sensor cleaning, the screen will display [ ]. To enable automatic sensor cleaning when the power switch is set to < > as well, you can set this in [ : Sensor cleaning] ( ). If you repeatedly turn the power switch to < > or < > within a short time period, the [ ] icon may not be displayed, but this does not indicate the camera is malfunctioning.
Battery Level Indicator When the power switch is set to < >, the battery level will be indicated. Battery level is sufficient. Battery level is low, but the camera can still be used. Battery will be exhausted soon (blinks). Charge the battery. Note Doing any of the following will exhaust the battery faster: • Pressing the shutter button halfway for a prolonged period. • Activating the AF frequently without taking a picture. • Using Image Stabilizer. • Using the Wi-Fi function or Bluetooth function.
Attaching and Detaching RF/RF-S Lenses Attaching a Lens Detaching a Lens Caution Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera's power switch to < >. If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part. Tips for avoiding smudges and dust When changing lenses, do it quickly in a place with minimal dust.
Attaching a Lens 1. Remove the caps. Remove the rear lens cap (1) and body cap (2) by turning them as shown by the arrows. 2. Attach the lens. Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place.
3. Set the focus mode to (< > ). < > stands for autofocus. < > stands for manual focus. Autofocus is disabled. For RF lenses without a focus mode switch • With [ : switch (AF/MF)] set to [Enable] ( ), set the focus >. mode switch on the front of the camera to < • With [ : switch (AF/MF)] set to [Disable] ( Focus mode] to [AF].
For RF lenses with a focus mode switch Set the lens focus mode switch to < >. The setting on the lens takes precedence, and the camera's focus mode switch and [ : switch (AF/MF)] setting have no effect. 4. Remove the front lens cap.
Detaching a Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the lens you removed.
Attaching and Detaching EF/EF-S Lenses Attaching a Lens Detaching a Lens All EF and EF-S lenses can be used by attaching an optional Mount Adapter EF-EOS R. The camera cannot be used with EF-M lenses. Attaching a Lens 1. Remove the caps. Remove the rear lens cap (1) and body cap (2) by turning them as shown by the arrows.
2. Attach the lens to the adapter. Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place. (3) Red index (4) White index 3. Attach the adapter to the camera. Align the red mount indexes (5) on the adapter and camera and turn the lens as shown by the arrow until it clicks into place.
4. 5. Set the lens's focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. Remove the front lens cap.
Detaching a Lens 1. While pressing the lens release button, turn the adapter as shown by the arrow. Turn the lens until it stops, then detach it. 2. Detach the lens from the adapter. Hold down the lens release lever on the adapter and turn the lens counterclockwise. Turn the lens until it stops, then detach it. Attach the rear lens cap to the lens you removed. Caution For lens precautions, see Attaching and Detaching RF/RF-S Lenses.
Multi-Function Shoe Using the Multi-Function Shoe The multi-function shoe is a hot shoe that supplies power to accessories and offers advanced communication functionality. Using the Multi-Function Shoe Removing the shoe cover Remove the shoe cover (1) by pressing the part labeled (A) in the figure as shown with your finger. After removal, keep the shoe cover in a convenient place to avoid losing it.
Attaching the shoe cover After removing accessories from the multi-function shoe, reattach the shoe cover to protect the contacts from dust and water. Slide the shoe cover all the way in by pressing the part labeled (B) in the figure, as shown. Caution Attach accessories correctly as described in Attaching accessories. Incorrect attachment may cause the camera or accessories to malfunction, and accessories may fall off.
Using the Viewfinder Dioptric Adjustment Look through the viewfinder to activate it. You can also restrict display to either the screen or viewfinder ( ). Dioptric Adjustment 1. Slide the dioptric adjustment slider. Slide the slider left or right to make the viewfinder display look sharp. Caution The viewfinder and screen cannot be activated at the same time. Viewfinder display is disabled when the screen is flipped out, even if you look through the viewfinder.
Basic Operations Holding the Camera Shutter Button < > Main Dial < > Quick Control Dial < < < < < < > Multi-Controller > Multi-Function Button > AF Start Button > Multi-Function Lock Button > Control Ring > Info Button 70
Holding the Camera Viewing the screen as you shoot As you shoot, you can tilt the screen to adjust it. For details, see Using the Screen. (1) Normal angle (2) Low angle (3) High angle Shooting through the viewfinder To obtain sharp images, hold the camera still to minimize camera shake. (1) Horizontal shooting (2) Vertical shooting 1.With your right hand, hold the camera firmly by the camera grip. 2.With your left hand, support the lens from below. 3.
Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture value. The exposure value (shutter speed and aperture value) is displayed on the screen or in the ). viewfinder for 8 sec. (metering timer/ Pressing completely This releases the shutter and takes the picture.
Note The camera will still pause before taking a picture if you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and immediately press it completely. Even during menu display or image playback, you can return to shooting standby by pressing the shutter button halfway.
< > Main Dial (1) After pressing a button, turn the < > dial. Press a button such as < > or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as setting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation. (2) Turn only the < > dial. While looking at the screen or viewfinder, turn the < > dial. Use this dial to set the shutter speed, aperture value, etc.
< > Quick Control Dial (1) After pressing a button, turn the < > dial. Press a button such as < > or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as selecting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation. (2) Turn only the < > dial. While looking at the screen or viewfinder, turn the < > dial.
< > Multi-Controller < > is an eight-direction key with center button. To use it, press lightly with the tip of your thumb.
< > Multi-Function Button By pressing the < > button and turning the < > dial, you can set the ISO speed ( ), drive mode ( ), AF operation ( ), white balance ( ), and flash exposure compensation ( ). To select the AF area, press the < > button, then press the < > button ( ).
< > AF Start Button Equivalent to pressing the shutter button halfway (in Creative Zone modes).
< > Multi-Function Lock Button Configuring [ : Multi function lock] ( ) and pressing the < > button prevents settings from being changed by accidentally touching the Main dial, Quick control dial, Multicontroller, control ring, or touch-screen panel. Press the < > button again to unlock the controls.
< > Control Ring By default, exposure compensation can be set by turning the control ring of RF lenses or mount adapters while pressing the shutter button halfway in < >, < >, < >, < >, or < > mode. Otherwise, you can assign a different function to the control ring by customizing operations in [ : Customize dials] ( ).
< > Info Button Each press of the < > button changes the information shown. The following sample screens are for still photos. * In Basic Zone modes, the screen by (1) is not displayed.
Menu Operations and Settings Basic Zone Menu Screen Creative Zone Menu Screen Menu Setting Procedure Dimmed Menu Items (1) < (2) < > Multi-controller (3) < (4) Screen (5) < (6) < > Quick control dial (7) < > Main dial > button > button > button 82
Basic Zone Menu Screen * In Basic Zone modes, some tabs and menu items are not displayed.
Creative Zone Menu Screen (1) Main tabs (2) Secondary tabs (3) Menu items (4) : Shooting (5) : Autofocus (6) : Playback (7) (8) : Wireless features : Set-up (9) : Custom Functions (10) : My Menu (11) Menu settings 84
Menu Setting Procedure 1. Display the menu screen. Press the < 2. Select a tab. Press the < functions). Turn the < 3. > button to display the menu screen. > button to switch between main tabs (groups of > dial to select a secondary tab. Select an item. Turn the < > dial to select an item, then press the < 85 > button.
4. Select an option. Turn the < > dial to select an option. The current setting is indicated in blue. 5. Set an option. Press the < 6. > button to set it. Exit the setting. Press the < > button to return to shooting standby. Note The description of menu functions hereafter assumes that you have pressed the < > button to display the menu screen. Menu operations are also possible by tapping the menu screen or using < > or < >. To cancel the operation, press the < > button.
Dimmed Menu Items Example: When set to single shooting drive mode Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing the > button. < If you cancel the overriding function's setting, the dimmed menu item will become settable. Caution You may not be able to see the overriding function for certain dimmed menu items.
Quick Control You can directly and intuitively select and set the settings displayed. 1. Press the < > button ( ).
2. Select a setting item and set your preferred option. Select an item by using the < down. >< > keys or pressing < > up or Adjust the setting by turning the < > dial, using the < >< > keys, or pressing < > left or right. Some items are set by pressing a button after this. Press < > or < > up, down, left, or right to select an item on the screen shown above. Turn the < > or < > dial to adjust the setting. Some items are set by pressing a button after this.
Touch-Screen Operation Tapping Dragging Tapping Sample screen (Quick Control) Use your finger to tap (touch briefly and then remove your finger from) the screen. For example, when you tap [ ], the Quick Control screen appears. By tapping [ you can return to the preceding screen. Note To have the camera beep for touch operations, set [ : Beep] to [Enable] ( ). Responsiveness to touch operations can be adjusted in [ : Touch control] ( ).
Dragging Sample screen (Menu screen) Slide your finger while touching the screen.
Basic Zone This chapter describes how to use the Basic Zone modes on the Mode dial for best results. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically.
A+: Fully Automatic Shooting (Scene Intelligent Auto) Shooting Moving Subjects Scene Icons Adjusting Settings Shooting with Effects Applied (Creative Assist) < > is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject ( ). 1. Set the Mode dial to < 2. Press the < >. > button. Read the message and select [OK].
3. Aim the camera at what you will shoot (the subject). An AF point (1) may be displayed on the subject, under some shooting conditions. When an AF point is displayed on the screen, aim it over the subject. 4. Focus on the subject. Press the shutter button halfway to focus. If < > blinks, manually raise the built-in flash. You can also focus by tapping a person's face or other subject on the screen (Touch AF). Under low light, the AF-assist beam ( needed.
5. Take the picture. Press the shutter button completely to take the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To retract the built-in flash, push it down with your fingers. Caution Subject movement (whether subjects are still or moving) may not be detected correctly for some subject or shooting conditions. Note AF operation (One-Shot AF or Servo AF) is set automatically when you press the shutter button halfway.
FAQ Focusing is not possible (indicated by an orange AF point). Aim the AF point over an area with good contrast, then press the shutter button halfway ( ). If you are too close to the subject, move away and shoot again. Multiple AF points are displayed simultaneously. Focus has been achieved at all those points. The shutter speed display is blinking. Since it is too dark, taking the picture may result in a blurred subject due to camera shake.
Shooting Moving Subjects Pressing the shutter button halfway tracks moving subjects to keep them in focus. Keep the subject on the screen as you hold down the shutter button halfway, and at the decisive moment, press the shutter button completely.
Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. An icon representing the detected scene appears in the upper left of the screen ( ) in still photo shooting, or when you press the movie shooting button to record a movie with the Mode dial set to < >.
Adjusting Settings By touching icons on the screen, you can adjust settings for drive mode, image quality, Touch Shutter, and Creative Assist.
Shooting with Effects Applied (Creative Assist) 1. Press the < > button. Read the message and select [OK]. 2. Select an effect. Use the < > dial to select an effect, then press the < 100 > button.
3. Select the effect level and other details. Set with the < > dial, then press the < To reset the setting, press the < 101 > button. > button, then select [OK].
Creative Assist effects [ ] Preset Select one of the preset effects. Note that [Saturation], [Color tone 1], and [Color tone 2] are not available with [B&W]. [ ] Background blur Adjust background blur. Choose higher values to make backgrounds sharper. To blur the background, choose lower values. [Auto] adjusts background blurring to match the brightness. Depending on lens brightness (f/number), some positions may not be available. [ ] Brightness Adjust image brightness. [ ] Contrast Adjust contrast.
Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. *< > stands for Special Scene. 1. Set the Mode dial to < 2. Press the < 3. Select a shooting mode. Use the < button. >. > button.
4. Review the settings. Press the < > button to display the Quick Control screen. Note You can also set the shooting mode in [ : Shooting mode]. When [ : Mode guide] is set to [Disable], after step 1, press the < > button to > dial to select a shooting mode, access the Quick Control screen, use the < then press the < > button.
Available Shooting Modes in Mode Shooting Mode Self Portrait Panning Portrait Close-up Smooth skin Food Group Photo Night Portrait Landscape Handheld Night Scene Panoramic shot HDR Backlight Control Sports Silent shutter Kids 105
Self Portrait Mode To take shots that include yourself, use [ ] (Self Portrait) mode. Rotate the screen around toward the lens. Customizable image processing includes skin smoothing as well as brightness and background adjustment to make yourself stand out. Shooting tips Set the brightness and smooth skin effect. [Brightness] and [Smooth skin effect] can be set in a range of five levels. In [Background], you can adjust the level of background blurring. Tap the screen to shoot.
Portrait Mode Use [ ] (Portrait) mode to blur the background and make the person you shoot stand out. It also makes skin tones and hair look softer. Shooting tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
Smooth Skin Mode Use [ ] (Smooth skin) mode to make skin look more attractive. Image processing makes skin look smoother. Shooting tips Enable the camera to detect faces. Frames are displayed around any main subjects detected for skin smoothing. For more effective skin smoothing, you can move closer to or farther from the subject so that the frame is displayed on the subject's face. Focus on the face. As you focus before shooting, make sure the AF point on the subject's face is green.
Group Photo Mode Use [ ] (Group Photo) mode to take group photos. You can shoot with people from the front to the back all in focus. Shooting tips Use a wide-angle lens. With zoom lenses, zooming out near the wide-angle end makes it easier to focus on everyone in front and back at once. You can also increase the depth of field by standing a little farther away from subjects, so that they fit completely in the frame. Take a few shots of the group.
Landscape Mode Use [ ] (Landscape) mode for expansive scenery, to keep everything in focus from near to far. For vivid blues and greens, and sharp and crisp images. Shooting tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. Keep the camera steady when shooting night scenes. Using a tripod is recommended. Caution Flash photography is not available.
Panoramic Shot Mode Use [ ] (Panoramic Shot) mode to shoot panoramas. The panorama is created by combining shots captured in continuous shooting as you move the camera in one direction while pressing the shutter button completely. 1. Choose a shooting direction. Press the < > button or tap [ direction you will shoot. ] in the lower right to choose the An arrow is displayed showing the direction to move the camera. 2. Press the shutter button halfway.
3. Shoot. Press the shutter button completely and move the camera at a constant speed in the direction of the arrow. The area displayed clearly (1) is captured. A shooting progress indicator (2) is displayed. Shooting stops when you release the shutter button, or when all of the progress indicator is white. Caution For details on lenses that can counteract blur from swinging the camera, visit the Canon website ( ).
Sports Mode Use [ ] (Sports) mode to shoot subjects in motion, such as runners or moving vehicles. Shooting tips Use a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance. Track the subject with the Area AF frame. An Area AF frame appears after you press the shutter button halfway. Once the subject is in focus, the AF point turns blue. Shoot continuously. ] (High speed continuous).
Kids Mode Use [ ] (Kids) mode to capture active children who are moving around. Skin tones will look vibrant. Shooting tips Track the subject with the Area AF frame. By default, [ : AF area] is set to [Whole area AF]. Area AF frames (1) appear when you press the shutter button halfway. Once the subject is in focus, the AF point turns blue. Shoot continuously. The default setting is [ ] (High speed continuous). At the decisive moment, press the shutter button completely to take the picture.
Panning Mode By panning, you can blur the background to convey a sense of speed. Attach a lens compatible with [ ] (Panning) mode to reduce subject blurring and keep subjects clear and sharp. Shooting tips Turn the camera to follow the moving subject. As you shoot, turn the camera smoothly while tracking the moving subject.
Caution For details on lenses compatible with [ ] mode, visit the Canon website ( ). Shutter speeds are slower. For this reason, Panning mode is not suitable unless you pan as you shoot. AF area options are limited to [1-point AF], [Flexible Zone AF 1], [Flexible Zone AF 2], and [Flexible Zone AF 3]. The default setting is [ ]. Note that [ ] is not available. Flash photography is not available.
Close-up Mode Use [ ] (Close-up) mode for close-ups of small subjects such as flowers. To make small things appear much larger, use a macro lens (sold separately). Shooting tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance. The lens minimum focusing distance > (focal plane) mark on the top of the camera to the subject.
Food Mode Use [ ] (Food) mode for culinary photography. The photo will look bright and appetizing. Also, the reddish tinge due to the light source will be suppressed in the pictures taken under tungsten lights, etc. Shooting tips Change the color tone. [Color tone] can be adjusted. To increase the reddish tinge of food, set toward [Warm tone] (red), or set toward [Cool tone] (blue) if it looks too red. Caution The warm color cast of subjects may fade.
Night Portrait Mode Use [ ] (Night Portrait) mode for bright, beautiful shots of people with night scenes in the background. Note that shooting in this mode requires the built-in flash or a Speedlite. Using a tripod is recommended. Shooting tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Because camera shake occurs in handheld shooting, using a tripod is also recommended. Check the image brightness.
Handheld Night Scene Mode [ ] (Handheld Night Scene) mode enables handheld shooting for night scenes. In this shooting mode, four shots are taken consecutively for each picture, and the resulting image with reduced camera shake is recorded. Shooting tips Hold the camera steady. Keep your elbows close to your body to hold the camera steady ( ).
HDR Backlight Control Mode Use [ ] ( HDR Backlight Control) mode for backlit scenes with both bright and dark areas. Shooting once in this mode captures three consecutive images at different exposures, which are combined to create a single HDR image that retains detail in shadows that might otherwise be lost from backlighting. * HDR stands for High Dynamic Range. Shooting tips Hold the camera steady. Keep your elbows close to your body to hold the camera steady ( ).
Silent Shutter Mode Where silence is needed, you can shoot without beeps or shutter release sounds. Shooting tips Take some test shots. Consider taking some test shots in advance, because lens aperture and focusing adjustment may be audible under some shooting conditions. Caution Be responsible when using silent shooting, and respect subject privacy and portrait rights. Images of fast-moving subjects may look distorted. Continuous shooting and flash photography are not available.
Creative Filters Mode Creative Filter Characteristics Adjusting the Miniature Effect You can shoot with filter effects applied. Filter effects can be previewed before you shoot. 1. Set the Mode dial to < 2. Press the < >. > button.
3. Select a filter effect. Turn the < button. > dial to select a filter effect ( ), then press the < > The image is shown with the filter effect applied. 4. Adjust the effect and shoot. Press the < (except / > button and select an icon below [Creative filters] , , , or ). Turn the < > dial to adjust the effect, then press the < > button. Caution These operations are also possible by using < > or < >. RAW and RAW+JPEG are not available.
Note With [Grainy B/W], the grainy preview will differ somewhat from the appearance of your shots. With [Soft focus] or [Miniature effect] options, the blurred effect preview may differ somewhat from the appearance of your shots. No histogram is displayed. A magnified view is not available. In Creative Zone modes, some Creative filter settings are available from the Quick Control screen ( ).
Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. Fish-eye effect Gives the effect of a fish-eye lens. The image will have barrel distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
HDR art embossed The color saturation, brightness, contrast and gradation are decreased to make the picture look flat, so that the picture looks faded and old. The subject outlines will have intensely bright (or dark) edges. Caution Precautions for [ ], [ ], [ ], and [ ] Compared to other shooting modes, the image area will be smaller. Shots will look slightly different from the filter effect previews shown on the screen.
Adjusting the Miniature Effect 1. Move the scene frame. Use the scene frame to set an area that will look sharp. To make the scene frame movable (displayed in orange), press the > button or tap [ ] in the lower right of the screen. By tapping < [ ], you can also switch between vertical and horizontal scene frame orientation. Switching scene frame orientation is also possible with the < >< > keys when in horizontal orientation and < >< > keys when in vertical orientation.
2. Move the AF point as needed and shoot. The AF point turns orange and can be moved. Press the < >< >< position to focus on. >< > keys to move the AF point to the Aligning the AF point and scene frame is recommended. To return the AF point to the center of the screen, tap [ To confirm the position of the AF point, press the < 129 ]. > button.
Creative Zone Creative Zone modes give you the freedom to shoot in a variety of ways by setting your preferred shutter speed, aperture value, exposure, and more. To clear the shooting mode description displayed when you turn the Mode dial, press the < > button ( ).
Fv: Flexible-Priority AE In this mode, you can set shutter speed, aperture value, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in < > mode, with control over each of these parameters, is equivalent to shooting in < >, < >, < >, or < > mode. *< > stands for Flexible value. 1. Set the Mode dial to < 2. Set the shutter speed, aperture value, and ISO speed. >. Turn the < > dial to select an item to set. [ of the selected item.
3. Set the amount of exposure compensation. Turn the < > dial and select the exposure level indicator. [ appears to the left of the exposure level indicator. Turn the < > dial to set the option. To reset the setting to [±0], press the < Combinations of functions in < Shutter Speed Aperture Value [AUTO] [AUTO] Manual selection [AUTO] [AUTO] Manual selection Manual selection Manual selection ] > button.
Note Values for shutter speed, aperture value, and ISO speed that are set to [AUTO] are underlined. You can set the shutter speed, aperture value, and ISO speed to [AUTO] and the exposure compensation amount to [±0] in step 2 or 3 by pressing the < > button.
P: Program AE The camera automatically sets the shutter speed and aperture value to suit the subject's brightness. * < > stands for Program. * AE stands for Auto Exposure. 1. Set the Mode dial to < 2. Focus on the subject. >. Aim the AF point over the subject and press the shutter button halfway. Once the subject is in focus, the AF point turns green (with One-Shot AF). The shutter speed and aperture value are set automatically. 3. Check the display.
4. Take the picture. Compose the shot and press the shutter button completely. Caution If the “30"” shutter speed and the lowest aperture value blink, it indicates underexposure. Increase the ISO speed or use flash. If the “1/4000” shutter speed and the highest aperture value blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.
Tv: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture value to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion. *< > stands for Time value. Blurred motion (Slow speed: 1/30 sec.) Frozen motion (Fast speed: 1/2000 sec.) 1. Set the Mode dial to < >.
2. Set the desired shutter speed. Turn the < 3. > dial to set it. Focus on the subject. Press the shutter button halfway. The aperture value is set automatically. 4. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained. Caution If the lowest aperture value blinks, it indicates underexposure. Turn the < > dial to set a slower shutter speed until the aperture value stops blinking or set a higher ISO speed.
Note Shutter speed display For example, “0"5” indicates 0.5 sec. and “15"”, 15 sec.
Av: Aperture-Priority AE Depth-of-Field Preview In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/ number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus.
2. Set the desired aperture value. Turn the < 3. > dial to set it. Focus on the subject. Press the shutter button halfway. The shutter speed is set automatically. 4. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained. Caution If the “30"” shutter speed blinks, it indicates underexposure. Turn the < > dial to decrease the aperture value (open the aperture) until the shutter speed blinking stops or set a higher ISO speed.
Note Aperture value display The higher the value, the smaller the aperture opening will be. The aperture value displayed varies depending on the lens. If no lens is attached to the camera, “F00” will be displayed for the aperture.
Depth-of-Field Preview Press the depth-of-field preview button to stop down the lens to the current aperture value setting and check the area in focus (depth of field). Note The larger the aperture value, the wider the area in focus, from the foreground to the background. The depth-of-field effect is readily apparent on images as you change the aperture value and press the depth-of-field preview button. Exposure is locked (AE lock) as you hold down the depth-of-field preview button.
M: Manual Exposure Exposure Compensation with ISO Auto In this mode, you set both the shutter speed and aperture value as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. *< > stands for Manual. 1. Set the Mode dial to < 2. Set the ISO speed ( Press the < >. ). > button to set it. With ISO Auto, you can set exposure compensation ( 3. ). Set the shutter speed and aperture value.
4. Focus on the subject. Press the shutter button halfway. Check the exposure level mark [ ] to see how far the current exposure level is from the standard exposure level. (1) Standard exposure index (2) Exposure level mark 5. Set the exposure and take the picture. Check the exposure level indicator and set the desired shutter speed and aperture value.
Note ISO speed is locked when you hold down the shutter button halfway after subjects are in focus with One-Shot AF in < > mode with ISO Auto, < > (Evaluative metering), and [ : AE lock meter. mode after focus] set to the default setting ( ). When ISO Auto is set, you can press the < > button to lock the ISO speed. If you press the < > button and recompose the shot, you can see the exposure level difference on the exposure level indicator compared to when the < > button was pressed.
B: Long (Bulb) Exposures Bulb Timer In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, astrophotography, and other subjects requiring long exposures. 1. Set the Mode dial to < 2. Set the desired aperture value. Turn the < 3. >. > dial to set it. Take the picture. The exposure will continue for as long as you keep the shutter button pressed completely.
Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Long bulb exposures produce more noise in the image than usual. ISO 400 is used when the camera is set to ISO Auto. When shooting bulb exposures with the self-timer instead of the bulb timer, keep pressing the shutter button completely (for the self-timer time and bulb exposure time).
2. Select [Enable]. Select [Enable], then press the < 3. > button. Set the exposure time. Select an option (hours : minutes : seconds). Press the < > button to display [ ]. Set a value, then press the < 4. Select [OK]. 148 > button. (Returns to [ ].
5. Take the picture. After you press the shutter button completely, the bulb exposure continues for your specified time. [ ] and the exposure time are displayed on the screen during bulb timer shooting. To clear the timer setting, select [Disable] in step 2. Caution Bulb exposure stops if you press the shutter button completely and release it during the timer. Note that setting the power switch to < > ends bulb timer shooting when the camera is set to [Shooting creative filters].
Flash Photography This chapter describes how to shoot with the built-in flash or an external flash (EL/EX series Speedlites). (< to the right of page titles indicates functions only available in Creative Zone modes >/< >/< >/< >/< >/< >). Caution Flash photography is not available with [ : Shutter mode] set to [Electronic]. Flash cannot be used while you are recording movies. AEB is not available in flash photography.
Shooting with the Built-in Flash Shooting with FE Lock Using the built-in flash is recommended when the [ ] icon appears in the viewfinder or on the screen, when subjects in daytime shots are backlit, or when shooting under low light. 1. Manually raise the flash. In Creative Zone modes, shooting with flash is possible whenever the flash is raised. [BUSY] is displayed on the screen while the flash is charging. 2. Press the shutter button halfway. Confirm that [ ] appears on the screen. 3.
Shooting tips In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. Detach the lens hood. Do not get too close to the subject. If the lens has a hood attached or you are too close to the subject, the bottom of the picture may look dark due to the obstructed flash light. For important shots, play back the image and check to make sure the picture does not look unnaturally dark at the bottom part.
2. Focus on the subject. 3. Press the < > button ( ). Center the subject on the screen, then press the < > button. A preflash is fired by the flash, and the flash output required for shooting is retained. [ ] appears briefly on the screen, and [ ] is lit. Each time you press the < > button, a preflash is fired, and the flash output required for shooting is retained. 4. Take the picture. Compose the shot and press the shutter button completely.
Caution The [ ] icon blinks when subjects are too far away and your shots would be dark. Approach the subject and repeat steps 2–4.
Flash Function Settings Flash Firing E-TTL Balance E-TTL II Flash Metering Continuous Flash Control Red-Eye Reduction Slow Synchro Built-in Flash Function Settings External Flash Function Settings External Flash Custom Function Settings Clearing Flash Function Settings/C.Fn Settings Functions of the built-in flash or external EL/EX series Speedlites can be set from menu screens on the camera. Before setting functions of external Speedlites, attach the Speedlite and turn it on.
2. Select an option. Flash Firing Set to [ ] (in Basic Zone or < shooting conditions. > modes) to have the flash fire automatically, based on Set to [ ] to have the flash always fire when you shoot. Select [ beam.
E-TTL Balance You can set your preferred appearance (balance) for flash shots. This setting enables you to adjust the ratio of ambient light to Speedlite light output. Set the balance to [Ambience priority] to lower the proportion of flash output and uses ambient light to produce lifelike shots with a natural mood. Especially useful when shooting dark scenes (indoors, for example). After switching to < > or < > mode, consider setting [Slow synchro] in [ : Flash control] to [1/250-30 sec.
E-TTL II Flash Metering Set to [Eval (FacePrty)] for flash metering suitable for shots of people. Set to [Evaluative] for flash metering that emphasizes firing in continuous shooting. If [Average] is set, the flash exposure will be averaged for the entire metered scene. Note Depending on the scene, flash exposure compensation may be necessary. Caution Even when [Eval (FacePrty)] is set, some subjects and shooting conditions may prevent you from obtaining the expected result.
Continuous Flash Control Set to [E-TTL each shot] to perform flash metering for each shot. Set to [E-TTL 1st shot] to perform flash metering for only the first shot before continuous shooting. The flash output level for the first shot is applied to all subsequent shots. Useful when prioritizing continuous shooting speed without recomposing shots. Caution Any subject movement in continuous shooting may cause exposure problems. [E-TTL 1st shot] is set automatically in [ ] drive mode.
Red-Eye Reduction Set to [Enable] to reduce red-eye by firing the red-eye reduction lamp before firing the flash.
Slow Synchro You can set the flash-sync speed for flash photography in < > or < > mode. Note that the maximum flash synchronization speed varies depending on the [ : Shutter mode] setting. It is 1/250 sec. when set to [Elec. 1st-curtain] and 1/200 sec. when set to [Mechanical]. 1/250-30 sec. auto ( )*1 Shutter speed is automatically set in the following range to suit brightness. High-speed sync is also possible. [ : Shutter mode] Setting Shutter Speed Mechanical 1/200–30 sec. Elec.
)*1 1/250-1/60 sec. auto ( Prevents a slow shutter speed from being set automatically in low-light conditions. Effective for preventing subject blur and camera shake. Light from the flash provides standard exposure for subjects, but note that backgrounds may be dark. [ 1/250 sec. (fixed) ( : Shutter mode] Setting Shutter Speed Mechanical 1/200–1/60 sec. Elec. 1st-curtain 1/250–1/60 sec.
Built-in Flash Function Settings Flash mode • Set to [E-TTL II] to shoot in E-TTL II/E-TTL fully automatic flash mode. • Set to [Manual flash] to specify your preferred flash output in [ 163 flash output].
Shutter sync. Normally, set to [1st curtain] so that the flash fires immediately after shooting starts. Set to [2nd curtain] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Caution When using second-curtain synchronization, set the shutter speed to 1/30 sec. or slower. For shutter speeds exceeding 1/40 sec., first-curtain synchronization is used automatically even if [2nd curtain] is set.
exp. comp. Set the flash exposure compensation if the brightness of the subject does not come out as desired (so you want to adjust the flash output) in flash photography. 1. Select [ 2. Set the compensation amount. exp. comp.]. To brighten flash exposure, set the compensation amount toward [Brighter] (positive compensation), or to darken it, set toward [Darker] (negative compensation). After taking the picture, cancel the flash exposure compensation by setting it back to 0.
Note The exposure compensation amount will remain in effect even after you set the power switch to < >.
External Flash Function Settings The information displayed on the screen, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. Refer to the instruction manual of your flash unit for details on its functions.
Flash mode You can select the flash mode to suit your desired flash photography. [E-TTL II flash metering] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite's [Flash output level] yourself. [CSP] (Continuous shooting priority mode) is available when using a compatible Speedlite. This mode automatically reduces flash output by one stop and increases ISO speed by one stop.
Wireless functions You can use radio or optical wireless transmission to shoot with wireless multiple-flash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. Firing ratio control (RATIO) With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the Instruction Manual of the macro flash.
Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the shooting starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
Flash exposure bracketing Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once.
External Flash Custom Function Settings For details on the external Speedlite's Custom Functions, refer to the Speedlite's Instruction Manual. 1. Select [External flash C.Fn setting]. 2. Set the desired functions. Select the number. Select an option. Caution With an EL/EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [1:TTL] (autoflash). Setting or clearing Speedlite Personal Functions (P.
Clearing Flash Function Settings/C.Fn Settings 1. Select [Clear settings]. 2. Select the settings to be cleared. Select [Clear built-in flash set.], [Clear external flash set.], or [Clear ext. flash C.Fn set.]. Select [OK] on the confirmation screen to clear all flash settings or Custom Function settings.
Shooting with Speedlites EL/EX Series Speedlites for EOS Cameras Canon Speedlites Other Than the EL/EX Series Non-Canon Flash Units EL/EX Series Speedlites for EOS Cameras Features of EL/EX series Speedlites (sold separately) can be used in flash photography with the camera. For instructions, refer to the EL/EX series Speedlite's Instruction Manual. Sync speed Varies depending on the shutter mode. [ : Shutter mode] Setting Sync Speed Mechanical 1/200 sec. or slower Elec. 1st-curtain 1/250 sec.
Note The Speedlite will fire an intermittent AF-assist beam as needed, if autofocusing is difficult under low light. You can also set flash exposure compensation in [External flash func. setting] in [ : Flash control] ( ). The camera can turn on certain Speedlites automatically when the camera is turned on. For details, refer to the instruction manual of Speedlites that support this feature.
Canon Speedlites Other Than the EL/EX Series With an EZ/E/EG/ML/TL series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only. Set the camera's shooting mode to < > or < > and adjust the aperture value before shooting. When using a Speedlite that has manual flash mode, shoot in the manual flash mode.
Non-Canon Flash Units Sync speed Sync speed for non-Canon compact flash units varies by shutter mode. [ : Shutter mode] Setting Sync Speed Mechanical 1/200 sec. or slower Elec. 1st-curtain 1/250 sec. or slower With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model. Before shooting, confirm that flash sync is performed correctly by taking some test shots at a sync speed of approx. 1/60 sec. to 1/30 sec.
Shooting and Recording This chapter describes shooting and recording and introduces menu settings on the shooting [ ] tab.
Still Photo Shooting to the right of titles indicates functions only available in Creative Zone modes.
• Shooting with the Touch Shutter • Image Review • High-Speed Display • Metering Timer • Display Simulation • Optical Viewfinder Simulation • Shooting Information Display • Reverse Display • Viewfinder Display Format • Display Performance • General Still Photo Shooting 180
Tab Menus: Still Photo Shooting Shooting 1 (1) Image quality (2) Dual Pixel RAW (3) Still img aspect ratio Shooting 2 (1) Expo.comp./AEB (2) ISO speed settings (3) HDR shooting (4) HDR Mode (5) Auto Lighting Optimizer (6) Highlight tone priority (7) Anti-flicker shoot.
Shooting 3 (1) Flash control (2) Metering mode Shooting 4 (1) White balance (2) Custom White Balance (3) WB Shift/Bkt.
Shooting 5 (1) Lens aberration correction (2) Long exp.
Shooting 7 (1) Drive mode (2) Interval timer (3) Bulb timer (4) Silent shutter function (5) Shutter mode (6) Release shutter without card Shooting 8 (1) IS (Image Stabilizer) mode (2) Customize Quick Controls (3) Touch Shutter (4) Image review (5) High speed display (6) Metering timer 184
Shooting 9 (1) Display simulation (2) OVF sim. view assist (3) Shooting info. disp. (4) Reverse display (5) VF display format (6) Disp. performance Shooting 10 (1) Movie rec.
In Basic Zone modes, the following screens are displayed.
Shooting 3 (1) IS (Image Stabilizer) mode (2) Touch Shutter (3) Image review (4) Shooting info. disp. (5) Reverse display (6) VF display format (7) Disp.
Shooting 5 (1) Movie rec.
Image Quality RAW Images Guide to Image Quality Settings Maximum Burst for Continuous Shooting You can select the pixel count and the image quality. JPEG/HEIF image quality options are as follows: / / / / / / . For RAW images, you can specify or as the image quality. 1. Select [ 2. Set the image quality. : Image quality]. For RAW images, turn the < > dial to select the size, and for JPEG/HEIF images, turn the < > dial. Press the < > button to set it.
Note HEIF can be specified when [ : HDR shooting ] is set to [Enable]. You can convert these images to JPEG images after shooting ( ). is set if you set both RAW and JPEG/HEIF to [ ]. Two versions of each shot are recorded at your specified image quality when you have selected both RAW and JPEG/HEIF. Both images have the same file number but each has a different file extension, with .JPG for JPEG, .HIF for HEIF and .CR3 for RAW. is in (Fine) quality.
RAW Images RAW images are raw data from the image sensor that are recorded to the card digitally as or , based on your selection. produces RAW images with smaller file sizes than . RAW images can be processed using [ : RAW image processing] ( ) to save them as JPEG or HEIF images. As the RAW image itself does not change, you can process the RAW image to create any number of JPEG or HEIF images with various processing conditions. You can use Digital Photo Professional (EOS software) to process RAW images.
Guide to Image Quality Settings For details on file size, number of shots available, maximum burst, and other estimated values, see Still photo file size / Number of shots available and Maximum burst for continuous shooting [Approx.].
Maximum Burst for Continuous Shooting The approximate maximum burst is displayed at the upper left of the shooting screen and lower right of the viewfinder. Note If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously. Fewer shots are available for a value of 98 or lower, and when [BUSY] is displayed on the screen, internal memory is full and shooting will stop temporarily. If you stop continuous shooting, the maximum burst will increase.
Dual Pixel RAW Shooting or images with this feature enabled produces special Dual Pixel RAW images containing dual pixel information from the image sensor. This is called Dual Pixel RAW shooting. When processing these images in Digital Photo Professional software for EOS cameras, you can take advantage of the dual pixel data to fine-tune apparent resolution (using depth information), shift the camera viewpoint slightly, and reduce ghosting.
Caution Startup takes longer when the power switch is set to < > or the camera resumes operation from auto power off. Continuous shooting speed is slower when you shoot with Dual Pixel RAW ( ). Maximum burst is also lower. [ ] and [ ] drive modes are not available. Setting the mode to [ ] or [ ] has the effect of setting it to [ ]. Noise may be slightly more noticeable in RAW, RAW+JPEG, or RAW+HEIF images.
Still Image Aspect Ratio You can change the image's aspect ratio. 1. Select [ 2. Set the aspect ratio. : Still img aspect ratio]. Select an aspect ratio. To proceed without changing shooting area display, press the < button. > JPEG images The images will be recorded with the set aspect ratio. RAW Images The images will always be recorded in the [3:2] aspect ratio.
3. Select how the shooting area is displayed. On the screen in step 2, press the < > button. Select the type of display, then press the < > button. Note RAW images shot at an aspect ratio of [4:3], [16:9], or [1:1] are displayed during playback with lines indicating the shooting area, but these lines are not recorded in the image. Note that only the shooting image area is shown in slideshows ( ).
Auto Exposure Bracketing (AEB) In exposure bracketing, three consecutive images are captured at different exposures within your specified range of up to ±3 stops (in 1/3-stop increments) by automatically adjusting the shutter speed, aperture value, or ISO speed. * AEB stands for Auto Exposure Bracketing. 1. Select [ 2. Set the AEB range. : Expo.comp./AEB]. Turn the < > dial to set the AEB range (1). By turning the < dial, you can set the exposure compensation amount. Press the < > button to set it.
3. Take the picture. Standard exposure Decreased exposure Increased exposure Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure. AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display. Caution Exposure compensation in AEB may be less effective with [ Optimizer] ( ) set to an option other than [Disable].
Manual Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation is available in < >, < >, < >, < >, and < > modes. For details on exposure compensation when < > mode and ISO Auto are both set, see M: Manual Exposure, and see Fv: Flexible-Priority AE for < > mode. 1. Check the exposure. Press the shutter button halfway and check the exposure level indicator. 2. Set the compensation amount.
Note The exposure compensation amount will remain in effect even after you set the power switch to < >.
Exposure Lock (AE Lock) Effect of AE Lock You can lock the exposure when you want to set the focus and exposure separately or when you will take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. 1. Focus on the subject. Press the shutter button halfway. The exposure value will be displayed. 2. Press the < > button ( ).
3. Recompose and take the picture. When you are to take more pictures while maintaining the AE lock, keep holding down the < > button and press the shutter button to take another picture. Note AE lock is not possible with bulb exposures. Effect of AE Lock Metering Mode Selection AF Point Selection Automatic Selection Exposure centered on the AF point in focus is locked. Manual Selection Exposure centered on the selected AF point is locked. Center-weighted exposure is locked.
ISO Speed Settings for Still Photos ISO Speed Range When Set Manually ISO Speed Range Used with ISO Auto Minimum Shutter Speed for ISO Auto Set the ISO speed (image sensor's sensitivity to light) to suit the ambient light level. In Basic Zone modes, ISO speed is set automatically. For details on ISO speed in movie recording, see ISO Speed in Movie Recording. 1. Press the < > button.
2. Set the ISO speed. Turn the < > dial to set it. ISO speed can be set within ISO 100–32000 in 1/3-stop increments. With [AUTO] selected, ISO speed is set automatically. When [AUTO] is selected, pressing the shutter button halfway will display the ISO speed actually set. To specify [AUTO] when setting [ISO speed] in [ > button.
Caution Image noise (dots of light or banding) and irregular colors may increase and apparent resolution may decrease at H (equivalent to ISO 51200), because this is an expanded ISO speed. Setting [ : Highlight tone priority] to [Enable] or [Enhanced] ( ) will prevent you from selecting ISO 100/125/160 or H (equivalent to ISO 51200). When shooting with a high ISO speed, high temperature, long exposure, or multiple exposure, image noise (graininess, dots of light, banding, etc.
ISO Speed Range When Set Manually You can set the manual ISO speed setting range (minimum and maximum limits). You can set the minimum limit within ISO 100 to ISO 32000 and the maximum limit within ISO 200 to H (equivalent to ISO 51200). 1. Select [ 2. Select [ISO speed range]. 3. Set [Minimum]. : ISO speed settings]. Select the [Minimum] box, then press the < Select an ISO speed, then press the < 207 > button. > button.
4. Set [Maximum]. Select the [Maximum] box, then press the < Select an ISO speed, then press the < 5. Select [OK]. 208 > button. > button.
ISO Speed Range Used with ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100–32000. The minimum can be set within ISO 100–25600 and the maximum within ISO 200–32000, in 1stop increments. 1. Select [Auto range]. 2. Set [Minimum]. Select the [Minimum] box, then press the < Select an ISO speed, then press the < 209 > button. > button.
3. Set [Maximum]. Select the [Maximum] box, then press the < Select an ISO speed, then press the < 4. > button. > button. Select [OK]. Note The [Minimum] and [Maximum] settings will also function as the minimum and maximum speeds for ISO speed safety shift ( ).
Minimum Shutter Speed for ISO Auto To prevent shutter speeds from being set too low automatically, you can set the minimum shutter speed for ISO Auto. This is effective in < > or < > mode when shooting subjects in motion with a wideangle lens, or when using a telephoto lens. It can also reduce camera shake and blurred subjects. 1. Select [Min. shutter spd.].
2. Set the desired minimum shutter speed. Auto If you select [Auto], turn the < > dial to set the difference relative to standard speed (toward Slower or Faster), then press the < > button. Manual If you select [Manual], turn the < then press the < > button. > dial to select the shutter speed, Caution If a correct exposure cannot be obtained with the maximum ISO speed limit set with [Auto range], a shutter speed slower than the [Min. shutter spd.] will be set to obtain the standard exposure.
HDR Shooting PQ in HDR PQ refers to the gamma curve of the input signal for displaying HDR images. HDR PQ settings enable the camera to produce HDR images conforming to the PQ specification defined in ITU-R BT.2100 and SMPTE ST.2084. (Actual display depends on monitor performance.) Shots are captured as HEIF or RAW images. * HDR stands for High Dynamic Range. * PQ stands for Perceptual Quantization. 1. Select [ 2. Select [Enable]. : HDR shooting ].
Caution Expanded ISO speeds (H) are not available in HDR shooting. Some scenes may look different from how they appear on an HDR display device. Unused signal values are roughly indicated by image areas in gray in the histogram when [ : HDR shooting ] is set to [Enable]. [ : Disp. performance] is not available when [ : HDR shooting ] is set to [Enable]. It is set to [Smooth].
HDR Mode You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. HDR shooting enhances gradation in dark image areas by merging three images deliberately captured at different exposures (standard, underexposed, and overexposed) to produce an HDR image that compensates for loss of detail in dark image areas. HDR images are captured as HEIFs or JPEGs.
3. Set [Limit max brightness] (only with [ to [Enable]). : HDR shooting ] set With [Disable], maximum brightness is not limited. Recommended when you will review images on a monitor supporting display at brightnesses exceeding 1000 nits. With [1000 nits], maximum brightness is limited to approx. 1000 nits. 4. Set [Continuous HDR]. With [1 shot only], HDR shooting is canceled automatically after you finish shooting.
5. Set [Auto Image Align]. For handheld shooting, select [Enable]. When using a tripod, select [Disable]. 6. Specify the images to save. To save the three images captured and the resulting HDR image, select [All images]. To save only the HDR image, select [HDR img only]. 7. Take the picture. When you press the shutter button completely, three consecutive images will be captured, and the HDR image will be recorded to the card.
Caution Expanded ISO speeds (H) are not available in HDR shooting. The flash will not fire during HDR shooting. AEB is not available. In HDR shooting, three images are captured with settings such as shutter speed automatically adjusted. For this reason, even in < >, < >, and < > modes, the shutter speed and ISO speed will change, relative to your specified speed. To prevent camera shake, a high ISO speed may be set.
Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. 1. Select [ 2. Set a correction option. : Auto Lighting Optimizer]. Caution Noise may increase and apparent resolution may change, under some shooting conditions. If the effect of Auto Lighting Optimizer is too strong and results are not at your preferred brightness, set to [Low] or [Disable].
Note To enable [ : Auto Lighting Optimizer] to be set even in < > and < modes, press the < > button in step 2 to clear the checkmark [ ] for [Disabled in M or B modes].
Highlight Tone Priority You can reduce overexposed, clipped highlights. 1. Select [ 2. Set an option. : Highlight tone priority]. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Caution Noise may increase slightly. The available ISO range starts at ISO 200. Expanded ISO speeds cannot be set.
Note [ : Highlight tone priority] is set to [Enable] and cannot be changed after you set [ : HDR shooting ] to [Enable] by pressing the < > button to add a checkmark to this setting. [ : Highlight tone priority] will be set to [Disable] even if you set [ : HDR shooting ] to [Enable], with [Adjust dyn range] in [ : HDR Mode] set to an option other than [Disable HDR].
Anti-Flicker Shooting Uneven exposure and color may appear in continuous shooting at fast shutter speeds under flickering light sources such as fluorescent lights, due to uneven vertical exposure. Antiflicker shooting enables you to take pictures when exposure and colors are less affected by flickering. 1. Select [ 2. Select [Enable]. 3. Take the picture. : Anti-flicker shoot.].
Caution When [Enable] is set and you shoot under a flickering light source, the shutterrelease time lag may become longer. Also, the continuous shooting speed may become slower, and the shooting interval may become irregular. Flicker at a frequency other than 100Hz or 120Hz cannot be detected. Also, if the flickering frequency of the light source changes during continuous shooting, effects of the flicker cannot be reduced.
Metering Mode Four methods (metering modes) to measure the subject's brightness are provided. Normally, evaluative metering is recommended. Evaluative metering is set automatically in Basic Zone modes (except in < : > mode, which uses center-weighted average metering). 1. Select [ 2. Select an option. : Metering mode]. : Evaluative metering General-purpose metering mode suited even for backlit subjects. The camera adjusts the exposure automatically to suit the scene.
: Center-weighted average The metering across the screen is averaged, with the center of the screen weighted more heavily. Caution With (evaluative metering), holding down the shutter button halfway when shooting with [One-Shot AF] locks the exposure value (AE lock). With (partial metering), (spot metering), or (center-weighted average metering), exposure is set at the moment the picture is taken (without locking the exposure value when the shutter button is pressed halfway). With [ : AE lock meter.
White Balance White Balance [ ] Auto White Balance [ ] Custom White Balance [ ] Color Temperature White balance (WB) is for making the white areas look white. Normally, the Auto [ ] (Ambience priority) or [ ] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. In Basic Zone modes, [ ] (Ambience priority) is set automatically.
3. Select a white balance setting. Turn the < > dial to make a selection. Note For [ ] and [ ] setting instructions, see [ To set your preferred color temperature, select [ > dial. turn the < ] Auto White Balance. ] in [ : White balance], then (Approx.
White Balance The human eye adapts to changes in lighting so that white objects look white under all kinds of lighting. Cameras determine white from the color temperature of lighting and, based on this, apply image processing to make color tones look natural in your shots.
[ ] Auto White Balance With [ ] (Ambience priority), you can slightly increase the intensity of the image's warm color cast when shooting a tungsten-light scene. If you select [ ] (White priority), you can reduce the intensity of the image's warm color cast. 1. Select [ 2. Select [ With [ 3. : White balance]. ]. ] selected, press the < Select an option. 230 > button.
Caution Precautions when set to [ ] (White priority) The warm color cast of subjects may fade. When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced. When using flash, the color tone will be the same as with [ ] (Ambience priority).
[ ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. Registration from an image on a card 1. Shoot a white object. Aim the camera at a plain white object, so that white fills the screen. Set the camera to manual focus ( has standard exposure.
2. Select [ 3. Import the white balance data. : Custom White Balance]. Turn the < > dial to select the image captured in step 1, then press the < > button. Select [OK] to import the data. 4. Select [ 5. Select the custom white balance. : White balance]. Select [ ].
Shooting and registering white balances 1. Press the < 2. Select the white balance item. Press < 3. > button. > up or down for selection. Select [Record and register WB]. Turn the < press the < > dial or press < > button.
4. Shoot a white object. Aim the camera at a plain white object, so that white fills the screen. Set the camera to manual focus ( has standard exposure. ) and shoot so that the white object The custom white balance is registered to the camera. Caution Correct white balance may not be obtained if the exposure of your image differs greatly from standard exposure. Note Instead of shooting a white object, you can also shoot a gray card or standard 18% gray reflector (commercially available).
[ ] Color Temperature A value can be set representing the white balance color temperature. 1. Select [ 2. Set the color temperature. : White balance]. Select [ Turn the < button. ]. > dial to set a color temperature, then press the < The color temperature can be set from approx. 2500K to 10000K in 100K increments. Note When setting the color temperature for an artificial light source, set the white balance correction (magenta or green bias) as necessary.
White Balance Correction White Balance Correction White Balance Auto Bracketing You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction 1. Select [ : WB Shift/Bkt.].
2. Set the white balance correction. Sample setting: A2, G1 Use < > to move the “■” mark on the screen to your preferred position. B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark. The direction and amount of correction are indicated in the upper right of the screen. Pressing the < settings. Press the < > button will cancel all the [WB Shift/Bkt.] > button to exit setup.
White Balance Auto Bracketing White balance bracketing enables you to capture three images at once with different color tones. Setting the white balance bracketing amount In step 2 for White Balance Correction, when you turn the < > dial, the “■” mark on the screen will change to “■ ■ ■” (3 points). Turning the dial clockwise sets the B/A bracketing, and turning it counterclockwise sets the M/G bracketing.
Note The images will be bracketed in the following sequence: 1. Standard white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard white balance, 2. Magenta (M) bias, and 3. Green (G) bias. You can also set white balance correction and AEB together with white balance bracketing. If you set AEB in combination with white balance bracketing, a total of nine images will be recorded for a single shot. The white balance icon blinks to indicate that white balance bracketing has been set.
Color Space The range of reproducible colors is called the “color space.” For normal shooting, sRGB is recommended. In Basic Zone, [sRGB] is set automatically. 1. Select [ 2. Set a color space option. : Color space]. Select [sRGB] or [Adobe RGB], then press the < > button. Adobe RGB This color space is mainly used for commercial printing and other professional applications. Recommended when using equipment such as Adobe RGB-compatible monitors or DCF 2.0 (Exif 2.21 or later) compatible printers.
Picture Style Selection Picture Style Characteristics Symbols Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. 1. Select [ 2. Select a Picture Style. : Picture Style].
Picture Style Characteristics Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor, and sunset scenes. Note If the desired color tone is not obtained with [Auto], use another Picture Style. Standard The image looks vivid, sharp, and crisp. Suitable for most scenes. Portrait For smooth skin tones, with slightly less sharpness. Suited for close-up portraits.
User Def. 1–3 You can add a new style based on presets such as [Portrait] or [Landscape] or a Picture Style file, then adjust it as needed ( ). Shots taken with a style you have not customized yet will have the same characteristics as the default [Auto] setting.
Symbols Icons on the Picture Style selection screen represent [Strength], [Fineness], and [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numbers indicate the values for these settings specified for the respective Picture Style. Sharpness Strength Fineness Threshold Contrast Saturation Color tone Filter effect (Monochrome) Toning effect (Monochrome) Caution For movie recording, “*, *” is indicated for the [Fineness] and [Threshold] parameters of [Sharpness].
Picture Style Customization Settings and Effects Monochrome Adjustment You can customize any Picture Style by changing it from the default settings. For details on customizing [Monochrome], see Monochrome Adjustment. 1. Select [ 2. Select a Picture Style. : Picture Style]. Select the Picture Style to adjust, then press the < 246 > button.
3. Select an option. Select an option, then press the < > button. For details on settings and effects, see Settings and Effects. 4. Set the effect level. Adjust the effect level, then press the < > button. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. Any settings you change from default values are displayed in blue.
Note For movie recording, [Fineness] and [Threshold] for [Sharpness] cannot be set (not displayed). By selecting [Default set.] in step 3, you can restore the parameter settings of the respective Picture Style to the defaults. To shoot with the Picture Style you adjusted, first select the adjusted Picture Style, then shoot.
Monochrome Adjustment Filter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N:None Normal black-and-white image with no filter effects. Ye:Yellow Blue sky will look more natural, and white clouds will look crisper. Or:Orange The blue sky will look slightly darker. The sunset will look more brilliant. R:Red The blue sky will look quite dark. Fall leaves will look crisper and brighter.
Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1] – [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software, ) can also be modified here. 1. Select [ 2. Select [User Def.]. : Picture Style]. Select [User Def. *], then press the < 250 > button.
3. Press the < > button. With [Picture Style] selected, press the < 4. > button. Select a base Picture Style. Select the base Picture Style, then press the < > button. Also select styles this way when adjusting styles registered to the camera with EOS Utility (EOS software). 5. Select an option. Select an option, then press the < 251 > button.
6. Set the effect level. Adjust the effect level, then press the < > button. For details, see Picture Style Customization. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names in [User Def. *] have been changed from default values. Caution If a Picture Style is already registered under [User Def.
Clarity You can adjust image clarity, as determined by the contrast of image edges. Set toward the negative end to make images look softer or toward the positive end for a sharper appearance. 1. Select [ 2. Set the effect level. : Clarity]. Caution Setting clarity may darken or lighten the areas around boundaries in high-contrast images. The effect of this setting is not shown in images on the screen in still photo shooting.
Shooting Creative Filters Configuring Shooting Creative Filters Characteristics of Shooting Creative Filters You can shoot with filter effects applied. Note that only images with the filter effects applied are saved. Configuring Shooting Creative Filters 1. Select [ : Shooting creative filters]. Caution The camera shoots in single shooting mode when a Creative filter is set, regardless of the drive mode setting (< >, < >, or < >).
2. Select a filter effect. Use the < > dial to select the filter effect ( ). Images are shown with the filter effect applied. Caution Some items on the AF tab are not available with [Fish-eye effect] or [Miniature effect] selected. 3. Adjust the filter effect. Press the < Use the < 4. > button. > dial to adjust the filter effect ( ). Take the picture. The images captured have the filter effect applied.
Note Different creative filter effects are available in movie recording ( 256 ).
Characteristics of Shooting Creative Filters Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. Fish-eye effect Gives the effect of a fish-eye lens. The image will have barrel distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
Caution With [Grainy B/W], the grainy preview will differ somewhat from the appearance of your shots. With [Soft focus] or [Miniature effect] options, the blurred effect preview may differ somewhat from the appearance of your shots. No histogram is displayed. A magnified view is not available.
Lens Aberration Correction Peripheral Illumination Correction Distortion Correction Digital Lens Optimizer Chromatic Aberration Correction Diffraction Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. 1. Select [ 2. Select an option. : Lens aberration correction].
3. Select a setting. Confirm that the name of the attached lens and [Correction data available] are displayed. If [Correction data not available] or [ Optimizer. ] is displayed, see Digital Lens Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. Caution Depending on shooting conditions, noise may appear on the image periphery. The higher the ISO speed, the lower the amount of correction will be.
Distortion Correction Distortion (image warping) can be corrected. Caution Specifying distortion correction may subtly change the angle of view, resulting in images that are cropped a little and seem slightly less sharp. The amount of image cropped may vary between still photos and movies. Note With RF lenses, distortion correction during movie recording is supported.
Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of resolution. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual. Caution Image processing after you shoot takes longer when set to [High] (which causes the access lamp to be illuminated longer).
Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. Note [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is set to [Standard] or [High].
Diffraction Correction Diffraction (loss of sharpness caused by the aperture) can be corrected. Caution Depending on shooting conditions, noise may be intensified together with the effects of correction. The higher the ISO speed, the lower the amount of correction will be. For movie recording, [Diffraction correction] will not appear. (Correction is not possible.) The effect of diffraction correction cannot be checked on the screen at the time of shooting.
Note General notes for lens aberration correction Effects of lens aberration correction vary by lens and shooting conditions. Also, the effect may be difficult to discern depending on the lens used, shooting conditions, etc. If the correction is difficult to discern, magnifying and checking the image after shooting is recommended. Corrections are applied even when an extender or life-size converter is attached.
Long Exposure Noise Reduction Noise such as dots of light or banding that tends to occur in long exposures at shutter speeds of one sec. or slower can be reduced. 1. Select [ 2. Set a reduction option. : Long exp. noise reduction]. Auto For images exposed for 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This setting is effective enough in most cases. Enable Noise reduction is performed for all images exposed for 1 sec. or longer.
Caution With [Auto] or [Enable] set, noise reduction after you shoot may take as long as exposure for the shot. Images may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting. [BUSY] is displayed as noise is reduced, and the shooting screen is not displayed until processing is finished, when you can shoot again.
High ISO Speed Noise Reduction You can reduce the image noise generated. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. 1. Select [ 2. Set the level. : High ISO speed NR]. Low, Standard, High The camera applies an amount of noise reduction corresponding to your specified level.
Caution Precautions on Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. Be careful about camera shake in handheld shots. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
Dust Delete Data Acquisition Preparation Dust Delete Data Appending Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically. Preparation Use an RF or EF lens. Prepare a solid white object such as a sheet of paper. Set the lens focal length to 50 mm or longer. Set the focus mode to MF ( ) and focus manually at infinity (∞).
2. Select [OK]. After the automatic self-cleaning of the sensor is performed, a message will appear. Although there will be a mechanical sound of the shutter during the cleaning, no picture is taken.
3. Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera. When the picture is taken, the camera will start collecting the Dust Delete Data. When the Dust Delete Data is obtained, a message will appear. If the data is not obtained successfully, an error message will appear.
Dust Delete Data Appending The camera will append the Dust Delete Data obtained to all shots from now on. Acquiring Dust Delete Data before shooting is recommended. For details about using Digital Photo Professional (EOS software) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual. File size is essentially unaffected by Dust Delete Data appended to images. Caution Dust Delete Data is not obtained when EF-S lenses are used.
Multiple Exposures Merging Multiple Exposures with a JPEG Image Recorded on the Card Checking and Deleting Multiple Exposures During Shooting As you shoot multiple exposures (2–9), you can see how the images will be merged into a single image. 1. Select [ 2. Set [Multiple exposure]. : Multiple exposure]. Select [Enable].
3. Set [Multi-expos ctrl]. Select a merging option, then press the < > button. Additive The exposure of each single image captured is added cumulatively. Based on [No. of exposures], set negative exposure compensation. Follow these basic guidelines to set the exposure compensation amount. Exposure compensation setting guidelines, by number of exposures Two exposures: –1 stop, three exposures: –1.5 stops, four exposures: –2 stops Average Based on the [No.
4. Set [No. of exposures]. Select the number of exposures, then press the < 5. > button. Set [Continue Mult-exp]. Select an option, then press the < > button. With [1 shot only], multiple-exposure shooting will be canceled automatically after the shooting ends. With [Continuously], multiple-exposure shooting continues until the setting in step 2 is set to [Disable].
6. Shoot the first exposure. The captured image is displayed. The [ ] icon blinks. The number of remaining exposures is indicated on the screen (1) for reference. Pressing the < ( ). 7. > button enables you to view the captured image Shoot the next exposures. Images captured so far are displayed merged. For only image display, press the < > button repeatedly. Multiple-exposure shooting will end when the set number of exposures are taken.
Caution Image noise, color shift, or banding may be noticeable in multiple exposures, depending on subjects and shooting conditions. With multiple exposures, the more exposures there are, the more noticeable the noise, irregular colors, and banding will be. Multiple-exposure shooting is canceled if you set the power switch to < > or switch batteries or cards. Multiple-exposure shooting ends if you switch to a Basic Zone mode or to < >, < >, or < > mode.
Merging Multiple Exposures with a JPEG Image Recorded on the Card You can select a JPEG image recorded on the card as the first single exposure. The selected JPEG image will remain intact. 1. Select [Select image for multi. expo.]. 2. Select the first image. Turn the < button. > dial to select the first image, then press the < > Select [OK]. The file number of the selected image will be displayed at the bottom of the screen.
3. Take the picture. When you select the first image, the number of remaining exposures as set with [No. of exposures] will decrease by 1. Caution The following images cannot be selected. • RAW or HEIF images • JPEG images in / / sizes • Images from other cameras Images that cannot be merged may be displayed. Note You can also select a JPEG image used in multiple-exposure shooting. Select [Deselect img] to cancel image selection.
Checking and Deleting Multiple Exposures During Shooting Before you finish shooting your specified number of exposures, you can press the < > button to view the multiple-exposure image so far, check exposure, and see how the images will be merged. Pressing the < > button will display the operations possible during multiple-exposure shooting. Option Return to previous screen Description The screen before you pressed the < > button will reappear.
FAQ Are there any restrictions on the image quality? Multiple exposures are captured as JPEG [ ] images. Even with [ set to RAW only, they are captured as JPEG [ ] images. : Image quality] Can I merge images recorded on the card? With [Select image for multi. expo.], you can select the first single exposure from the images recorded on the card ( ). Note that you cannot merge multiple images already recorded on the card.
RAW Burst Mode Enables fast continuous shooting of RAW images. Useful for choosing the best shot, taken at exactly the right moment, from your captured images. Shots are captured as a single file (roll) with multiple images. You can extract any image from the roll to save it separately ( ). 1. Select [ 2. Set [RAW burst mode]. 3. Select [Enable]. : RAW burst mode]. After you select [Enable], [ 283 ] is displayed when you shoot.
4. Select [Pre-shooting]. 5. Set an option. [Enable]: Shooting begins slightly before (up to approx. 0.5 sec. before) you press the shutter button completely, after you momentarily press it halfway. [ ] is displayed when you shoot. [Disable]: Shooting begins when you press the shutter button completely. [ ] is displayed when you shoot.
6. Shoot. An on-screen indicator shows buffer status. The color varies by status. The indicator is green during shooting, red if recording is not possible because the buffer is full, and white otherwise. Pressing the shutter button completely shoots continuously until the buffer is full or you release the button.
Caution Use cards with 4 GB or more of free space. Images may not be captured correctly if the battery runs out during image processing while you are shooting in RAW burst mode with a slow-writing card and low battery. Display pauses when you press the shutter button halfway. Camera shake or subject motion may cause image distortion. ISO Auto is used when shooting in < >, < >, or < > mode. Shutter speeds slower than 1/30 sec. are not available in < >, < >, or < > mode. The camera shoots with approx.
Focus Bracketing Focus bracketing enables continuous shooting with the focal distance changed automatically after each shot. These images enable you to create a single image in focus over a deep depth of field. Compositing is also possible using an application that supports depth compositing, such as Digital Photo Professional (EOS software). 1. Select [ 2. Set [Focus bracketing]. : Focus bracketing]. Select [Enable].
3. Set [Number of shots]. Specify the number of images captured per shot. Can be set in a range of [2]–[999]. 4. Set [Focus increment]. Specify how much to shift the focus. This amount is automatically adjusted to suit the aperture value at the time of shooting. Larger aperture values increase the focus shift and make focus bracketing cover a wider range under the same focus increment and number of shots. After completing the settings, press the < 288 > button.
5. Set [Exposure smoothing]. You can compensate for changes in image brightness during focus bracketing by selecting [Enable], so that the camera makes adjustments based on differences between the displayed and actual aperture value (effective f/number), which varies by focal position. Select [Disable] if you prefer not to compensate for changes in image brightness during focus bracketing. Use this option for purposes other than depth compositing of the captured images in applications such as DPP. 6.
7. Set [Crop depth comp.]. Select [Enable] for cropping before compositing, to prepare any images without a sufficient angle of view for compositing alignment by cropping them to correct the angle of view. Select [Disable] if you prefer not to crop these images. In this case, areas without a sufficient angle of view are covered by a black border in the saved images. You can crop the images manually or edit them as needed. 8. Shoot. To save your shots in a new folder, tap [ ] and select [OK].
Caution Focus bracketing is intended for still photo shooting on a tripod. Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. For details on lenses compatible with this feature, visit the Canon website ( ). Suitable [Focus increment] settings vary by subject. An unsuitable [Focus increment] setting may cause unevenness in composite images, or shooting may take more time because more shots are taken.
Depth compositing image quality setting and images saved Only ( Source Images*1 Composited Image RAW JPEG/HEIF*2 JPEG/HEIF JPEG/HEIF ) Only JPEG/HEIF*3 Image Quality ) + JPEG/HEIF*3 ( ( ) + JPEG/HEIF JPEG/HEIF * 1 Multiple captured images * 2 Image quality of composited images is *3 / image is / for / / / when set to ( ). image quality is not available. Settings are adjusted so that the resulting / or for / . Note Composited images are saved as JPEG or HEIF images.
Interval Timer Shooting With the interval timer, you can set the shooting interval and number of shots, so that the camera takes individual shots repeatedly according to your interval until your specified number of shots are taken. 1. Select [ 2. Select [Enable]. : Interval timer]. Select [Enable], then press the < 293 > button.
3. Set the shooting interval and number of shots. Select an option to set (hours : minutes : seconds / number of shots). Press the < > button to display [ ]. Set a value, then press the < > button. (Returns to [ ].) Interval Can be set in a range of [00:00:01]–[99:59:59]. No. of shots Can be set in a range of [01]–[99]. To keep the interval timer on indefinitely until you stop it, set [00]. 4. Select [OK]. The interval timer settings will be displayed on the menu screen.
5. Take the picture. First shot is taken and shooting continues according to the interval timer settings. During interval timer shooting, [ ] will blink. After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled. Note Using a tripod is recommended. Taking test shots in advance is recommended. Even during interval timer shooting, you can still shoot as usual by pressing the shutter button completely.
Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. In < > focus mode, the camera will not shoot unless subjects are in focus. Consider setting the mode to manual focus and focusing manually before shooting. If the shooting time is long, using the household power outlet accessories (sold separately) is recommended.
Silent Shutter Function Disables shutter release sounds, operating sounds, and firing and illumination of the flash and other light sources. The following settings are used and cannot be changed. Shutter mode: [Electronic] Beep: [Disable] Long exposure noise reduction: [Disable] Flash firing: [Disable] AF-assist beam firing: [Disable] When using lenses equipped with focus preset, consider turning off the focus preset beep. 1. Select [ 2. Select [On]. : Silent shutter function].
Shutter Mode You can choose the method of shutter release. 1. Select [ 2. Select an option. : Shutter mode]. Mechanical Shooting activates the mechanical shutter. Recommended when shooting with the aperture of a bright lens wide open. Elec. 1st-curtain Camera vibration blur may be reduced more than with the mechanical shutter, under some shooting conditions. Flash sync shutter speed can be set higher than with the mechanical shutter.
Electronic Enables reduced sound and vibration from shutter operations, compared to mechanical shutter or electronic first-curtain. Recommended when shooting with the aperture of a bright lens wide open. Maximum shutter speed can be set higher than for mechanical shutter or electronic firstcurtain. • A white frame is displayed around the screen when [ ] or [ ]. [ : Drive mode] is set to • Shutter operations are accompanied by beeps. You can disable beeping in [ : Beep].
Releasing Shutter without Card You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. 1. Select [ 2. Select [Disable]. : Release shutter without card].
Image Stabilizer (IS Mode) Image stabilization by the lens reduces camera shake in still photo shooting. To activate lens IS when using IS lenses without an IS switch, set [IS mode] to [On] as follows. Note that the [IS mode] setting is not displayed when you are using IS lenses that have an IS switch. In that case, setting the lens IS switch to < > activates stabilization by the lens. 1. Select [ 2. Select an [IS mode] option. : IS (Image Stabilizer) mode]. [Off] Deactivates image stabilization.
Note For details on image stabilization for movie recording, see Movie Digital IS.
Customizing Quick Controls Resetting the Custom Quick Control Screen or Clearing All Items Quick Control items and the layout are customizable. 1. Select [ 2. Select [Edit layout]. : Customize Quick Controls].
3. Select items to remove. Turn the < press the < > dial or use < > button. > to select an item to remove, then Items shown on the Quick Control screen are labeled with a checkmark. Items without a checkmark will be removed. 4. Select items to add. Turn the < > dial or use < the < > button. To change the layout, press the < 304 > to select an item to add, then press > button.
5. Change the layout. Use the < button. > dial to select an item to move, then press the < Use the < > dial to move the item, then press the < Press the < 6. > button to exit setup. Select [Save and exit]. 305 > > button.
7. Review the screen. Press the < > button to check the screen with your settings applied. Resetting the Custom Quick Control Screen or Clearing All Items Select [Reset settings] to restore the default Quick Control screen items and layout. Select [Clear all items] to remove all items from the layout, so that no Quick Control > button is pressed.
Shooting with the Touch Shutter Just by tapping the screen, you can focus and take the picture automatically. 1. Enable the Touch Shutter. Tap [ ] on the screen. Each time you tap the icon, it will toggle between [ ] and [ ]. [ ] (Touch Shutter: Enable) The camera will focus on the spot you tap, then the picture will be taken. [ ] (Touch Shutter: Disable) You can tap a spot to perform focusing on the spot. Press the shutter button completely to take the picture. 2. Tap the screen to shoot.
Caution The camera shoots in single shooting mode regardless of the drive mode setting ([ ], [ ], or [ ]). Tapping the screen focuses with [One-Shot AF], even if [ : AF operation] is set to [Servo AF]. Tapping the screen in magnified view will not focus or take the picture. When shooting by tapping with [Review duration] in [ : Image review] set to [Hold], you can take the next shot by pressing the shutter button halfway or tapping [ ]. Note To shoot with bulb exposure, tap the screen twice.
Image Review Review Duration Viewfinder Display Review Duration To keep the image displayed immediately after you shoot, set to [Hold], and if you prefer not to have the image displayed, set to [Off]. 1. Select [ 2. Select [Review duration]. 3. Set a time option. : Image review].
Note When [Hold] is set, images are displayed as long as the time set in the [Screen off] option of [ : Power saving].
Viewfinder Display Set to [Enable] for viewfinder display of your shots immediately after you shoot. 1. Select [ 2. Select [Viewfinder display]. 3. Select an option. : Image review]. Note [Viewfinder display] settings take effect when [Review duration] is set to an option other than [Off].
High-Speed Display High-speed display that switches between each shot and the live image is available when shooting in [ ] (high-speed continuous shooting) drive mode and in a shutter mode other than electronic shutter. 1. Select [ 2. Select an option. : High speed display]. Select [Enable] for display that switches between each shot and the live image.
Caution Images may waver or flicker during high-speed display. This occurs more often at high shutter speeds. However, this does not affect shooting results. High-speed display is not performed for shutter speeds slower than 1/30 sec., aperture values higher than f/11, conditions that make autofocusing difficult, flash photography, or high ISO expansion. It may also stop as you are shooting. High-speed display is not available in the following cases. • With [ • With [ : OVF sim.
Metering Timer You can set how long the metering timer runs (which determines the duration of exposure value display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. 1. Select [ 2. Set a time option. : Metering timer].
Display Simulation With display simulation, display of image brightness and depth of field more closely matches the actual brightness (exposure) of your shots. 1. Select [ 2. Select an option. : Display simulation]. Exposure+DOF ( ) Image brightness and depth of field as displayed closely matches the actual brightness (exposure) of your shots. If you set exposure compensation, the image brightness will change accordingly. Similarly, changes to the aperture value will alter the depth of field.
Disable ( ) The image is displayed at standard brightness, so it is easy to see. Even if you set exposure compensation, the image is displayed at the standard brightness. Caution Notes on [Exposure+DOF] Display may flicker at some shutter speeds. With EF lenses, this setting may increase the shutter-release time lag. The depth of field shown is only a guideline. For more precise indication of the depth of field, press the depth-of-field preview button. [Exposure+DOF] is not available with some lenses.
Optical Viewfinder Simulation Natural-looking viewfinder and screen display, resembling the view from an optical viewfinder, is available in still photo shooting. Note that images displayed with this feature set to [On] may differ from actual shooting results. 1. Select [ 2. Select an option. : OVF sim. view assist].
Caution Setting this feature to [On] sets [ : Display simulation] to [Disable]. Optical viewfinder simulation is used for display when this feature is set to [On] in HDR shooting. Creative filter display is used when shooting with Creative filters, even if this feature set to [On]. Image brightness before and after One-Shot AF is more likely to change when set to [On] than when set to [Off].
Shooting Information Display Customizing Information on the Screen Customizing Information in the Viewfinder Viewfinder Vertical Display Grid Histogram Lens Information Display Clearing Settings You can customize the details and screens of information shown on the screen or in the viewfinder when you shoot. Customizing Information on the Screen 1. Select [ : Shooting info. disp.].
2. Select [Screen info. settings]. 3. Select screens. Turn the < camera. > dial to select screens of information to show on the For information you prefer not to display, press the < clear the checkmark [ ]. To edit the screen, press the < 320 > button.
4. Edit the screen. Turn the < information. > dial to select options to show on the screen of For items you prefer not to display, press the < checkmark [ ]. Select [OK] to register the setting.
Customizing Information in the Viewfinder 1. Select [ 2. Select [VF info/toggle settings]. 3. Select screens. : Shooting info. disp.]. Turn the < camera. > dial to select screens of information to show on the For information you prefer not to display, press the < clear the checkmark [ ]. To edit the screen, press the < 322 > button.
4. Edit the screen. Turn the < information. > dial to select options to show on the screen of For items you prefer not to display, press the < checkmark [ ]. Select [OK] to register the setting.
Viewfinder Vertical Display You can select how viewfinder information is displayed when you are shooting still photos vertically. 1. Select [ 2. Select [VF vertical display]. : Shooting info. disp.].
3. Select an option. On Information is automatically rotated, making it easier to read. Off Information is not automatically rotated.
Grid A grid can be displayed on the screen and viewfinder. 1. Select [ 2. Select [Grid display]. 3. Select an option. : Shooting info. disp.].
Histogram You can select the content and display size of the histogram. 1. Select [ 2. Select [Histogram disp]. 3. Select an option. : Shooting info. disp.]. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]).
Lens Information Display You can display information about the lens in use. 1. Select [ 2. Select [Lens info display]. : Shooting info. disp.].
3. Select an option. Focus distance disp You can display focus distance when using RF lenses. In focus distance display, you can select the timing and unit of measurement. Focal length disp You can display the focal length of the lens in use. SA variable amount You can display the amount of correction set when using lenses featuring spherical aberration control.
Clearing Settings 1. Select [ 2. Select [Reset]. 3. Select [OK]. : Shooting info. disp.].
Reverse Display A mirror image can be displayed when you shoot with the screen rotated toward the subject (toward the front of the camera). 1. Select [ 2. Select [On]. : Reverse display]. Select [Off] if you prefer not to reverse display when the screen is facing the subject.
Viewfinder Display Format You can select how information is presented in the viewfinder. 1. Select [ 2. Select an option. : VF display format].
Display Performance You can select the performance parameter to prioritize in shooting screen display for still photos. 1. Select [ 2. Select an option. : Disp. performance]. When set to [Smooth] By pressing the < > button to add a checkmark, you can include low-light locations in the scenarios for suppressing lower display frame rates. The high frame rate (119.88 fps) display of the [Smooth] option is used for shooting standby in viewfinder shooting.
Caution Some shooting conditions and camera operations may prevent smooth, high frame rate display, even when set to [Smooth]. Shooting under low light with [Suppress lower frame rate] set for shooting screen display may affect performance as follows.
General Still Photo Shooting Information Display General Still Photo Shooting Precautions Information Display For details on the icons displayed for still photo shooting, see Information Display. Note White display of the [ ] icon indicates that your shots will be about as bright as the image displayed. If the [ ] icon is blinking, it indicates that the image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions.
General Still Photo Shooting Precautions Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Image quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image.
Under low light, bright [ : Screen brightness] settings may cause noise or irregular colors in images. However, the noise or irregular colors will not be recorded in the captured image. When you magnify the image, the image sharpness may look more pronounced than in the actual image. Lens If the attached lens has an Image Stabilizer and you set the Image Stabilizer switch to < >, the Image Stabilizer will operate at all times even if you do not press the shutter button halfway.
Movie Recording For movie recording, set the Mode dial to < >. to the right of titles indicates functions only available in [ ] mode. Caution When switching from still photo shooting to movie recording, check the camera settings again before recording movies. Note You can record movies by pressing the movie shooting button during still photo shooting.
Tab Menus: Movie Recording Shooting 1 (1) Shooting mode (2) Movie rec. size (3) High Frame Rate (4) Digital zoom (5) Sound recording Shooting 2 (1) Exposure comp. (2) ISO speed settings (3) HDR shooting (4) Auto Lighting Optimizer (5) Highlight tone priority (6) Av 1/8-stop incr.
Shooting 3 (1) White balance (2) Custom White Balance (3) WB correction (4) Picture Style • Picture Style Selection • Picture Style Customization • Picture Style Registration (5) Clarity (6) Shooting creative filters Shooting 4 (1) Lens aberration correction (2) High ISO speed NR 340
Shooting 5 (1) Time-lapse movie (2) Movie self-timer (3) Remote control Shooting 6 (1) IS (Image Stabilizer) mode (2) Customize Quick Controls (3) Shutter btn function for movies (4) Metering timer (5) Zebra settings (6) Shooting info. disp.
Shooting 7 (1) VF display format (2) Standby: Low res. (3) HDMI display (4) Time code In < > mode, the following screens are displayed.
Shooting 2 (1) Movie self-timer (2) Remote control Shooting 3 (1) Shutter btn function for movies (2) Shooting info. disp. (3) Reverse display (4) VF display format (5) Standby: Low res.
Movie Recording Autoexposure Movie Recording ISO Speed in [ ] Mode Manual Exposure Movie Recording ISO Speed in [ ] Mode Shutter Speed HDR Movie Recording Still Photo Shooting Information Display (Movie Recording) Autoexposure Movie Recording Exposure is controlled automatically to suit the brightness. 1. Set the Mode dial to < >.
2. Select [ 3. Select [Movie auto exposure]. 4. Focus on the subject. : Shooting mode]. Before recording a movie, focus with AF ( ) or manual focus ( ). By default, [ : Movie Servo AF] is set to [Enable] so that the camera always keeps focusing ( ). When you press the shutter button halfway, the camera focuses using your specified AF area.
5. Record the movie. Press the movie shooting button to start recording a movie. You can also start recording a movie by tapping [ ] on the screen. While the movie is being recorded, the [ REC] icon (1) will be displayed in the upper right of the screen. Sound is recorded with the movie microphone (2). To stop recording the movie, press the movie shooting button again. You can also stop recording a movie by tapping [ ] on the screen.
ISO Speed in [ ] Mode ISO speed is set automatically. See ISO Speed in Movie Recording.
Manual Exposure Movie Recording You can manually set the shutter speed, aperture value, and ISO speed for movie recording. 1. Set the Mode dial to < 2. Select [ 3. Select [Movie manual exp.]. >. : Shooting mode].
4. Set the shutter speed, aperture value, and ISO speed. Press the shutter button halfway and check the exposure level indicator. Turn the < > dial to set the shutter speed (1) and the < > dial to set the aperture value (2), and press the < > button to set the ISO speed (3). Available shutter speeds vary by frame rate ( 5. ). Focus and record the movie. Same as steps 4 and 5 for Autoexposure Movie Recording.
Caution During movie recording, avoid changing the shutter speed, aperture value, or ISO speed, which may record changes in the exposure or create more noise at high ISO speeds. When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec. is recommended. The faster the shutter speed, the less smooth the subject's movement will look. If you change the shutter speed while recording under fluorescent or LED lighting, image flicker may be recorded.
ISO Speed in [ ] Mode You can set the ISO speed manually or select [ ISO speed, see ISO Speed in Movie Recording. 351 ] to set it automatically.
Shutter Speed Available shutter speeds in [ ] mode vary depending on the frame rate you have set for your specified movie recording size. Frame Rate Shutter Speed (Sec.
HDR Movie Recording You can record high dynamic range movies that retain detail in highlights of high-contrast scenes. Note Movies are recorded at (NTSC) or 1. Set the Mode dial to < 2. Select [ : Shooting mode]. 3. Select [ HDR Movie]. 4. Record an HDR movie. (PAL). >. Record the movie in the same way as normal movie recording. For details on file sizes and the recording time available, see Movie recording.
Caution Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted. This is more noticeable in handheld recording affected by camera shake, so consider using a tripod. Note that even if a tripod is used for recording, afterimages or noise may become more noticeable, compared to normal playback, when the HDR movie is played back frame-by-frame or in slow motion.
Still Photo Shooting Still photo shooting is not supported in movie recording mode. To shoot still photos, turn the Mode dial to switch to another shooting mode.
Information Display (Movie Recording) For details on the icons on the movie recording screen, see Information Display. Caution The remaining time displayed for movie recording is only a guideline. Movie recording may stop before the initially displayed recording time elapses if the red [ ] icon appears due to high internal camera temperature during recording ( ).
Movie Recording Size 4K Movie Recording Image Area Cards That Can Record Movies Movie Files Exceeding 4 GB Total Movie Recording Time and File Size Per Minute Movie Recording Time Limit You can set the recording size, frame rate, and compression method in [ : Movie rec. size]. Note that the frame rate is updated automatically to match the [ : Video system] setting ( ).
Note To obtain better performance with the card, formatting the card with the camera before recording movies is recommended ( ). Movies cannot be recorded in HD or VGA quality. 4K Movie Recording Recording 4K movies requires a stable card with a fast writing speed. For details, see Cards That Can Record Movies. 4K movie recording greatly increases the processing load, which may increase the internal camera temperature faster or higher than for regular movies.
Image Area The movie image area varies depending on the movie recording size setting. (1) (2) (3840×2160) / (3840×2160) (1920×1080) Caution Recording with Movie digital IS ( the screen.
Frame rate (fps: frames per second) [ ] 119.9 fps/[ ] 59.94 fps/[ ] 29.97 fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For [ ], see High Frame Rate. [ ] 100.00 fps/[ ] 50.00 fps/[ ] 25.00 fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.). For [ ], see High Frame Rate. [ ] 23.98 fps Mainly for cinematic purposes. Available when [ : Video system] is set to [For NTSC].
Cards That Can Record Movies See Card performance requirements for details on cards supporting all movie recording sizes. Test cards by recording a few movies to make sure they can record correctly at your specified size ( ). Caution Before recording 4K movies, format cards by selecting [Low level format] in [ : Format card] ( ). If you use a slow-writing card when recording movies, the movie may not be recorded properly.
Movie Files Exceeding 4 GB Using SDHC cards formatted with the camera If you use the camera to format an SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically. When you play back the movie, you will have to play back each movie file individually. Movie files cannot be played back automatically in consecutive order. After the movie playback ends, select the next movie and play it back.
Total Movie Recording Time and File Size Per Minute For details, see Movie recording.
Movie Recording Time Limit When recording non-High Frame Rate movies The maximum recording time per movie is 2 hr. Once 2 hr. is reached, recording stops automatically. You can start recording a movie again by pressing the movie shooting button (which records the movie as a new file). When recording High Frame Rate movies The maximum recording time per movie is 30 min. Once 30 min. is reached, recording stops automatically.
High Frame Rate You can record movies at a high frame rate of 119.9 fps or 100.0 fps. This is ideal for recording movies that will be played back in slow motion. Note that the maximum recording time per movie is 30 min. Movies are recorded in ( ) or ( ) quality. Sound is not recorded in High Frame Rate movies. Time code display during movie recording advances 4 sec. per second. Because High Frame Rate movies are recorded as 29.97 fps/25.00 fps movie files, they are played in slow motion at 1/4 speed.
Digital Zoom With the recording size set to [ ]/[ shoot with approx. 1–10× digital zoom. 1. Select [ 2. Select an option. ] (NTSC) or [ ] (PAL), you can : Digital zoom]. Select the amount to zoom, then press the < Press the < > button to close the menu. 366 > button.
3. Use digital zoom. To zoom, either tap [ ] in the lower right or, if you have assigned the < >< > keys to [Digital zoom] in [ : Customize buttons], press the < >< > keys. The digital zoom bar will appear. Tap [▲T] or press the < > key to zoom in, and tap [▼W] or press the < > key to zoom out. Pressing the shutter button halfway focuses with [1-point AF] (fixed at center). To cancel digital zoom, select [Disable] in step 2. Caution Using a tripod to prevent camera shake is recommended.
Sound Recording Sound Recording/Sound-Recording Level Wind Filter Audio Noise Reduction You can record movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can also freely adjust the sound-recording level. Use [ : Sound recording] to set sound recording functions. Caution Sounds from Wi-Fi operations may be captured with built-in or external microphones. During sound recording, using the wireless communication function is not recommended.
Note In Basic Zone modes, the settings available for [ : Sound recording] are [On] and [Disable]. Set to [On] for automatic adjustment of the recording level. Audio is also output when the camera is connected to televisions via HDMI, unless [Sound recording] is set to [Off]. In case of feedback from television audio output, move the camera away from the television or turn down the volume. The volume balance between L/R (left/right) cannot be adjusted. Sound is recorded at a 48 kHz/16-bit sampling rate.
Wind Filter Set to [Auto] to reduce audio distortion in windy outdoor scenes. Disabled when external microphones are connected to the external microphone IN terminal. When the wind filter function takes effect, part of the low bass sounds will also be reduced.
Audio Noise Reduction When recording with the built-in microphone, this feature reduces mechanical lens sounds caused by autofocusing, as well as white noise. Disable Disables audio noise reduction. Enable Enables audio noise reduction. High Reduces audio noise more than with [Enable]. Caution Audio quality may be different when set to [Enable] than when set to [Disable]. Although [High] reduces audio noise more than with [Enable], this option may also have a greater impact on audio quality.
Shooting Creative Filters Creative Filter Characteristics In < > (creative filters) mode, you can record movies with one of five filter effects applied: Dream, Old movies, Memory, Dramatic B&W, or Miniature effect movies. Recording size can be set to / (NTSC) or (PAL). 1. Select [ 2. Select a filter effect. : Shooting creative filters]. Turn the < > dial to select a filter effect ( ). For Miniature effect movies, move the AF point to the position to focus on.
3. Adjust the filter effect level. Press the < Turn the < button. > button. > dial to select a filter effect level, then press the < When setting up miniature effect movies, select the playback speed. 4. Take the picture. Caution A magnified view is not available. No histogram is displayed. Subjects such as the sky or white walls may not be rendered with smooth gradation and may have noise or irregular exposure or colors.
Creative Filter Characteristics Dream Applies a soft, dreamy, otherworldly appearance. Gives the movie a soft look overall, blurring the periphery of the screen. You can adjust the blurry areas along the screen edges. Old movies Creates an atmosphere like an old film by adding wavering, scratches, and flickering effects to the image. The top and bottom of the screen are masked in black. You can modify the wavering and scratch effects by adjusting the filter effect.
Caution [ ] (Miniature effect movies) Sound is not recorded. Movie Servo AF is disabled. Editing is not available for miniature effect movies with a playback time less than 1 sec. ( ).
Time-Lapse Movies Approx. Time Available for Recording Time-Lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc.
3. Set [Interval]. Select [Interval]. As you set the number, refer to the [ playback time (2). ] time required (1) and [ ] Select an option (hours : minutes : seconds). Press the < > button to display [ ]. Set a value, then press the < > button. (Returns to [ ].) Can be set in a range of [00:00:02]–[99:59:59]. (An interval of once per second is not available.) Select [OK] to register the setting.
4. Set [No. of shots]. Select [No. of shots]. As you set the number, refer to the time required ([ time ([ ]). ]) and playback Select the digit. Press the < > button to display [ ]. Set a value, then press the < > button. (Returns to [ ].) Can be set in a range of [0002]–[3600]. Make sure the playback time ([ ]) is not displayed in red. Select [OK] to register the setting.
5. Select [Movie rec. size]. (3840×2160) The movie is recorded in 4K quality. The aspect ratio is 16:9. Additionally, the frame rate is 29.97 fps ( ) for NTSC and 25.00 fps ( ) for PAL, and movies are recorded in MP4 ( ) format with ) compression. ALL-I ( (1920×1080) The movie will be recorded in Full High-Definition (Full HD) quality. The ) for aspect ratio is 16:9. Additionally, the frame rate is 29.97 fps ( NTSC and 25.
6. Set [Auto exposure]. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots. Each frame Metering is also performed for each subsequent shot to set the exposure automatically to match the brightness.
7. Set [Screen auto off]. Disable Even during time-lapse movie recording, the image will be displayed. (The screen turns off only at the time of shooting.) Note that the screen will turn off when approx. 30 min. elapse after the shooting started. Enable Note that the screen will turn off when approx. 10 sec. elapse after the shooting started. Caution Even if [Screen auto off] is set to [Disable], the screen turns off during exposure.
8. Set [Beep per taken]. Set to [0] to prevent the camera from beeping for each shot. 9. Check the settings. Time required (1) Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed. Playback time (2) Indicates the movie recording time (time required to play back the movie) when creating the time-lapse movie in 4K movie or Full HD movie from the still photos taken with the set intervals. 10. Close the menu.
11. Read the message. Read the message and select [OK].
12. Take a test shot. Press the < > button and double-check the Time required (1) and Interval (2) shown on the screen. As in still photo shooting, set the exposure and shooting functions, then press the shutter button halfway to focus. Press the shutter button completely to take a test shot, which is recorded to the card as a still photo. If there are no problems with the test shot, go to the next step. To take more test shots, repeat this step. Note Test shots are captured in JPEG quality.
13. Press the movie shooting button. The camera is now ready to start recording a time-lapse movie. To return to step 12, press the movie shooting button again. 14. Record the time-lapse movie. Press the shutter button completely to start recording the timelapse movie. AF will not work during time-lapse movie recording. A recording icon “●” is displayed on the screen as the time-lapse movie is recorded. When the set number of shots are taken, the time-lapse movie recording ends.
Note Using a tripod is recommended. Taking test shots as in step 12 and recording test movies for time-lapse movies beforehand is recommended. The movie's field of view coverage for both the 4K and Full HD time-lapse movie recording is approx. 100%. To cancel time-lapse movie recording in progress, either press the shutter button completely or press the movie shooting button. The time-lapse movie shot so far will be recorded on the card.
Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Time-lapse movies cannot be recorded when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected. Movie Servo AF will not function. If the shutter speed is 1/30 sec.
Image stabilization is not applied in time-lapse movie recording. Time-lapse movie shooting ends if the power switch is set to < >, for example, and the setting is changed to [Disable]. Even if a flash is used, it will not fire. The following operations cancel standby for time-lapse movie recording and switch the setting to [Disable].
Approx. Time Available for Recording Time-Lapse Movies For guidelines on how long you can record time-lapse movies (until the battery runs out), see Movie recording.
Movie Self-Timer Movie recording can be started by the self-timer. 1. Select [ 2. Select an option. 3. Record the movie. : Movie self-timer]. After you press the movie shooting button or tap [ ], the camera displays the number of seconds left before recording and beeps. Note To cancel the self-timer, either tap the screen or press the < 390 > button.
Image Stabilizer (IS Mode) Movie Digital IS Movie digital IS reduces camera shake as movies are recorded. This can provide effective stabilization even when non-IS lenses are used. When using an IS lens, set the Image Stabilizer switch to < >. Movie Digital IS 1. Select [ 2. Select a [ : IS (Image Stabilizer) mode]. Digital IS] option. Off ( ) Image stabilization with Movie digital IS is disabled. On ( ) Camera shake will be corrected. The image will be slightly magnified.
Enhanced ( ) Compared to when [On] is set, stronger camera shake can be corrected. The image will be more magnified. Caution Movie digital IS will not function when the lens's optical Image Stabilizer switch is set to < >. Stabilization by Movie digital IS may be less effective at some movie recording sizes. The wider the angle of view (wide angle), the more effective the image stabilization will be. The narrower the angle of view (telephoto), the less effective the image stabilization will be.
Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. 1. Select [ : Shutter btn function for movies].
2. Select an option. Half-press Specify the function performed by pressing the shutter button halfway. Fully-press Specify the function performed by pressing the shutter button completely. With [Fully-press] set to [Start/stop mov rec], you can start/stop movie recording not only with the movie shooting button but also by pressing the shutter button completely, or by using Remote Switch RS-60E3 (sold separately).
Zebra Settings To help you adjust exposure before or during movie recording, you can display a striped pattern over or around image areas of a specified brightness. 1. Select [ 2. Select [Zebra]. : Zebra settings]. Select [On].
3. Select [Zebra pattern]. [Zebra 1]: Displays left-slanting stripes around areas of the specified brightness. [Zebra 2]: Displays right-slanting stripes over areas that exceed the specified brightness. [Zebra 1+2]: Displays both [Zebra 1] and [Zebra 2]. [Zebra 1] display takes precedence where [Zebra 1] and [Zebra 2] display areas overlap. 4. Set the level. Zebra 1 level Zebra 2 level Set by turning the < > dial or pressing < 396 > up or down.
Note The maximum brightness value does not reach 100% when HDR-PQ is set. Note that the maximum brightness value varies depending on [ : Highlight tone priority] and [ : Picture Style] settings. Checking the zebra display level in advance is recommended when you will set [Zebra pattern].
Time Code Count Up Start Time Setting Movie Recording Count Movie Play Count HDMI Drop Frame Time codes record the time automatically as movies are recorded. Time codes always record elapsed hours, minutes, seconds, and frames. They are mainly used when movies are edited. To set up the time code, use [ : Time code]. Caution Time codes may not be displayed correctly if your movies are played back on devices other than the camera.
Count Up Rec run The time code advances only during movie recording. Time codes in each movie file recorded continue from the last time code in the previous file. Free run The time code keeps advancing, even when you are not recording. Caution When set to [Free run], time codes are not added to movies recorded with the camera configured for High Frame Rate, time-lapse, or Creative filter recording.
Start Time Setting You can set the initial time of the time code. Manual input setting Enables you to set any starting hour, minute, second, and frame. Reset Resets the time set with [Manual input setting] or [Set to camera time] to “00:00:00.” or “00:00:00:” ( ). Set to camera time Matches the hour, minute, and second set as the time on the camera. Sets the frame value to “00.
Movie Recording Count You can select how time is displayed on the movie recording screen. Rec time During recording standby, displays the available recording time. During recording, displays the time that has elapsed since movie recording began (1). Time code Displays the time code during movie recording (2).
Movie Play Count You can select how time is displayed on the movie playback screen. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except when High Frame Rate movies are set to [Free run]), regardless of the [Movie rec count] setting. The [Movie play count] setting in [ : Time code] is linked to the [ : Movie play count], so that these settings always match.
HDMI Time code Time codes can be added to movies as you record them to an external device via HDMI. • Off No time code is added to HDMI video output. • On Time codes are added to HDMI video output. When [On] is set, [Rec Command] is displayed. Rec Command For HDMI video output recorded by an external device, you can synchronize recording to when you start and stop recording movies on the camera. • Off Recording is started and stopped by the external device.
Drop Frame The time code's frame count will cause a discrepancy between the actual time and the time code if the frame rate is set to (119.9 fps), (59.94 fps), or (29.97 fps). The discrepancy is corrected automatically when [Enable] is set. Enable Corrects the discrepancy automatically by skipping time code numbers (DF: drop frame). Disable The discrepancy is not corrected (NDF: non-drop frame). Time codes are displayed as follows. • Enable (DF) 00:00:00. (Playback: 00:00:00.
Other Menu Functions [ 2] [ 3] [ 4] [ 5] [ 6] [ 7] 2] [ Exposure comp. Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Manual Exposure Compensation. ISO speed settings • ISO speed In [ ] mode, you can set the ISO speed manually. You can also select ISO Auto. • ISO speed range You can set the manual ISO speed setting range (minimum and maximum). ISO expansion can also be configured.
HDR shooting For details on HDR shooting , see HDR Shooting. Auto Lighting Optimizer Brightness and contrast can be corrected automatically. For details on Auto Lighting Optimizer, see Auto Lighting Optimizer. Highlight tone priority You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see Highlight Tone Priority. Av 1/8-stop incr. • You can set aperture values on a finer scale when recording movies with an RF lens.
Auto slow shutter You can choose whether to record movies that are brighter and less affected by image noise than when set to [Disable] by automatically slowing the shutter speed under low light. Available in [ ] recording mode. Applies when the frame rate of the movie recording size is or . • Disable Enables you to record movies with smoother, more natural movement, less affected by subject shake than when set to [Enable]. Note that under low light, movies may be darker than when set to [Enable].
[ 3] White balance For details on white balance, see White Balance. Custom White Balance For details on custom white balance, see Custom White Balance. WB correction For details on white balance correction, see White Balance Correction. Picture Style For details on Picture Styles, see Picture Style Selection. Clarity For details on clarity, see Clarity.
[ 4] Lens aberration correction Peripheral illumination correction, distortion correction, and chromatic aberration correction can be corrected as you record movies. For details on lens aberration correction, see Lens Aberration Correction. High ISO speed NR For details on High ISO speed noise reduction, see High ISO Speed Noise Reduction.
[ 5] Remote control By setting to [Enable], you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately).
[ 6] Customize Quick Controls For details on customizing Quick Controls, see Customizing Quick Controls. Metering timer For details on the metering timer, see Metering Timer. Shooting info. disp. For details on configuring shooting information display, see Shooting Information Display. Reverse display For details on reverse display, see Reverse Display.
[ 7] VF display format For details on the viewfinder display format, see Viewfinder Display Format. Standby: Low res. Set to [On] to conserve battery power and control the rise of camera temperature during standby. As a result, it may enable you to record movies over a longer period. Caution Image quality on the standby screen may differ from image quality on the screen during movie recording.
HDMI display You can specify how movies are displayed as they are recorded via HDMI to an external device. Movie output itself corresponds to the [Movie rec. size] setting. The default setting is [ ]. • + Enables movie display both on the camera screen and on the other device, via HDMI output. Camera operations such as image playback or menu display are shown on the other device via HDMI, not on the camera screen. • Deactivates the camera screen during output via HDMI, so that the screen is blank.
Caution HDMI output without information prevents display of warnings about the card space, battery level, or high internal temperature ( ) via HDMI. During HDMI output, display of the next image may take some time if you switch between movies of different recording sizes or frame rates. Avoid operating the camera when recording movies to external devices, which may cause information to be displayed in the HDMI video output.
General Movie Recording Precautions Guidance Display Before Recording Warning Indicator Display in Movie Recording Guidance Display Before Recording Guidance may be displayed when the camera starts up, after settings are adjusted, or in other situations. The guidance warns that the camera may become hot internally if movies are recorded under the current settings, and that if you continue recording, the camera may turn off automatically.
Warning Indicator Display in Movie Recording A 10-level indicator (1) is displayed during movie recording in case of excessive internal camera temperature. As the internal temperature rises, the level on the indicator extends to the right. How fast the level increases will depend on shooting conditions. Levels 1–7 are marked in white, but once the temperature reaches level 8, the color changes. [ ] flashes in red if you continue recording after the indicator reaches level 9, marked in orange.
Caution Precautions for movie recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. If you record something that has fine detail, moire or false colors may result. If [ ] or [ ] is set and the ISO speed or aperture value changes during movie recording, the white balance may also change.
If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie recording. The indicator shows how much data has not yet been written to the card (remaining capacity of the internal buffer memory), and it increases more quickly the slower the card is. If the indicator (1) becomes full, movie recording will stop automatically. If the card has a fast writing speed, the indicator will not appear or the level (if displayed) will not increase much.
AF/Drive This chapter describes autofocus operation and drive modes and introduces menu settings on the AF [ ] tab. (< to the right of page titles indicates functions only available in Creative Zone modes >/< >/< >/< >/< >/< >). Note < > stands for autofocus. < > stands for manual focus.
Tab Menus: AF (Still Photos) AF1 (1) AF operation (2) AF area (3) Subject tracking (4) Subject to detect (5) Eye detection (6) Switching tracked subjects Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab if you have set [ : switch (AF/MF)] to [Disable] ( ).
AF2 (1) Case 1 (2) Case 2 (3) Case 3 (4) Case 4 (5) Case A (6) Tracking sensitivity (7) Accel./decel. tracking AF3 (1) One-Shot AF release prior.
AF4 (1) Touch & drag AF settings (2) Limit AF areas (3) sensitivity- AF pt select (4) Orientation linked AF point AF5 (1) MF peaking settings (2) Focus guide (3) Movie Servo AF 422
AF6 (1) Electronic full-time MF (2) Lens electronic MF (3) Focus/control ring (4) Focus ring rotation (5) RF lens MF focus ring sensitivity 423
In Basic Zone modes, the following screens are displayed. Note that available menus vary by shooting mode.
AF3 (1) Touch & drag AF settings (2) sensitivity- AF pt select AF4 (1) MF peaking settings (2) Focus guide (3) Movie Servo AF AF5 (1) Focus ring rotation (2) RF lens MF focus ring sensitivity 425
Tab Menus: AF (Movie Recording) AF1 (1) Movie Servo AF (2) AF area (3) Subject tracking (4) Subject to detect (5) Eye detection (6) Switching tracked subjects Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab if you have set [ : switch (AF/MF)] to [Disable] ( ). AF2 (1) Movie Servo AF speed (2) Movie Servo AF track sens.
AF3 (1) Lens drive when AF impossible AF4 (1) Touch & drag AF settings (2) Limit AF areas (3) sensitivity- AF pt select AF5 (1) MF peaking settings (2) Focus guide 427
AF6 (1) Electronic full-time MF (2) Lens electronic MF (3) Focus/control ring (4) Focus ring rotation (5) RF lens MF focus ring sensitivity 428
AF Operation One-Shot AF for Still Subjects Servo AF for Moving Subjects You can select the AF operation characteristics to suit the shooting conditions or subject.
1. Set the focus mode to (< >). For RF lenses without a focus mode switch switch (AF/MF)] set to [Enable] ( ), set the focus • With [ : mode switch on the front of the camera to < >. • With [ : switch (AF/MF)] set to [Disable] ( Focus mode] to [AF]. ), set [ : For RF lenses with a focus mode switch Set the lens focus mode switch to < switch is now disabled. 430 >.
2. Select [ 3. Select an option. : AF operation]. Note If focus is not achieved, the AF point will turn orange. When using One-Shot AF, either recompose the shot and try to focus again or see Shooting Conditions That Make Focusing Difficult. With Servo AF, the camera shoots even when subjects are not in focus.
One-Shot AF for Still Subjects This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture. For details on the continuous shooting speed for continuous shooting, see Selecting the Drive Mode.
2. 3. After the AF point in focus turns green, keep the shutter button pressed halfway and recompose the shot. Press the shutter button completely to take the picture.
Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. When focus is achieved, the AF point will turn blue. The beeper will not sound even when focus is achieved. The exposure is set at the moment the picture is taken. For details on the continuous shooting speed for continuous shooting, see Selecting the Drive Mode.
Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. 1. Select [ : Movie Servo AF].
2. Select [Enable]. Enable • The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. • To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by tapping [ ] in the lower left of the screen. • Movie Servo AF will resume after pausing if you return to movie recording after operations such as pressing the < > or > button or changing the AF area.
Caution Precautions when set to [Movie Servo AF: Enable] Shooting conditions that make focusing difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When shooting with a higher aperture value. • Also see Shooting Conditions That Make Focusing Difficult. Since the lens is driven continuously and the battery power is consumed, the possible movie recording time ( ) will be shortened.
Selecting the AF Area AF Area Selecting the AF Area Subject Tracking Subject to Detect Eye Detection Switching Tracked Subjects Tracking with the Button Focus Mode Manually Setting AF Points or Zone AF Frames Magnified View AF Shooting Tips Shooting Conditions That Make Focusing Difficult AF Range 438
AF Area This section describes AF area operation with [ : Subject tracking] set to [Off]. : Spot AF The camera focuses in a narrower area than 1-point AF. : 1-point AF The camera focuses using a single AF point [ 439 ].
: Expand AF area: Focuses using one AF point [ ] and the AF area outlined here in blue. Effective for moving subjects, which are difficult to track with 1-point AF. Focusing on your preferred subject is easier than with Flexible Zone AF. When Servo AF is used, first you will focus using an AF point [ ]. : Expand AF area: Around Focuses using one AF point [ ] and the surrounding AF area outlined here in blue, which makes it easier to focus on moving subjects than with Expand AF area: .
: Flexible Zone AF 1 By default, a square Zone AF frame is set. : Flexible Zone AF 2 By default, a vertical rectangular Zone AF frame is set.
: Flexible Zone AF 3 By default, a horizontal rectangular Zone AF frame is set. With Flexible Zone AF 1–3, you can freely set the size of the Zone AF frame ( ). Uses auto selection AF in Zone AF frames to cover a larger area than Expand AF area, which makes focusing easier than with 1-point AF/Expand AF area and effective for moving subjects.
Selecting the AF Area You can select the AF area to suit the shooting conditions or subject. If you prefer to focus manually, see Manual Focus. 1. Select [ 2. Select the AF area. : AF area]. The screen above is displayed when [ : Orientation linked AF point] ( ) is set to [Separate AF pts: Area+pt]. Set separate AF areas after choosing vertical and horizontal orientations.
Note To set the AF area, you can also press the < > button and then the < > button. The following descriptions apply to the camera with AF operation set to [One-Shot AF] ( ). With [Servo AF] ( ) set, the AF point will turn blue when focus is achieved.
Subject Tracking Among the subjects detected, a tracking frame [ ] is displayed over the main subject. If the subject moves, the tracking frame [ ] also moves to track it. You can set [ : Eye detection] to [Enable] to shoot with the subject's eyes in focus ( 1. Select [ 2. Select an option. : Subject tracking]. Caution No tracking frame is displayed when [ : Subject tracking] is set to [Off], regardless of the [ : Subject to detect] setting. 445 ).
Manually selecting a subject for focus 1. Check the tracking frame. A tracking frame [ ] appears over any subjects detected. Tracking frames [ ] away from AF points are displayed in gray. Once the tracked subject is near an AF point, even if it is outside the AF point, the tracking frame turns white (distinguishing it as an active frame), which enables selection as the main subject. The AF point turns gray. Gray display of tracking frames [ 2. ] does not apply in movie recording.
Note Selecting a subject by touch with [ : AF area] set to [Whole area AF] changes the tracking frame to [ ] and locks on to that subject for tracking across the entire screen. To release locked tracking, tap [ ]. Pressing the shutter button halfway when the AF point does not overlap the tracking frame [ ] will focus using the active, white AF frame. When AF operation is set to Servo AF, pressing the shutter button halfway focuses using Whole area AF.
Subject to Detect You can specify conditions for automatic selection of the main subject to track. People Prioritizes the faces or heads of people as the main subjects to track. When a person's face or head cannot be detected, the camera attempts to detect and track their torso. If their torso cannot be detected, the camera may track other parts of their body. Animals Detects animals (dogs, cats, or birds) and people and prioritizes detection results for animals as the main subjects to track.
Caution The camera may detect areas other than faces or bodies of people or animals or key details or bodies of vehicles as subjects. Faces that are very small or large in the picture, too bright or dark, or partly hidden cannot be detected. Animal face detection is not possible unless the subject is close enough and facing the camera steadily. A tracking frame is displayed for the entire body. Detection may not be possible for birds camouflaged in a forest, or similar situations.
Eye Detection You can shoot with the eyes of people or animals in focus. 1. Select [ 2. Select an option. : Eye detection].
3. Aim the camera at the subject. A tracking frame is displayed around their eye. To choose an eye to focus on when [ : AF area] is set to [Whole area AF], either tap the screen or use < >. As you use < >, the ]. tracking frame changes again to [ You can also tap the screen to choose an eye, when [ set to [Whole area AF] or during tracking in progress. : AF area] is If your selected eye is not detected, an eye to focus on is selected automatically. 4. Take the picture.
Switching Tracked Subjects You can specify how easily the camera switches AF points to track subjects. Initial priority Tracks the subject initially determined for AF, to the extent possible. On subject Tracks the subject initially determined for AF, to the extent possible. Switches to other subjects if the camera can no longer determine if the tracked subject is the main subject. Switch subject Switches to track other subjects in response to shooting conditions.
Tracking with the Button You can press a button assigned to [Start/stop tracking] in [ : Customize buttons] to > track subjects with a tracking frame [ ]. This example is based on assigning the < button ( ). 1. Check the AF point. The AF point (1) will appear. With Expand AF area: or Expand AF area: Around, adjacent AF points are also displayed. With Flexible Zone AF, the specified Zone AF frame is displayed. 2. Press the < > button.
3. Take the picture. Note AF areas and points return to the position before tracking when tracking stops after you press the shutter button halfway or completely, or in shooting standby (when [Servo AF] is used).
Focus Mode You can set how the camera focuses. 1. Select [ 2. Select an option. : Focus mode]. AF The camera operates in autofocus mode. MF The camera operates in manual focus mode.
Caution [ : Focus mode] is not displayed under these conditions. • With [ switch (AF/MF)] set to [Enable] • When lenses with a focus mode switch are attached • When lenses designed exclusively for manual focusing are attached • When no lens is attached • When set to [MF], AF points are hidden during basic information display, and an MF icon is displayed.
Manually Setting AF Points or Zone AF Frames You can manually set the AF point or Zone AF frame. Screens such as these are shown when set to Flexible Zone AF 1. 1. Check the AF point or Zone AF frame. An AF point or Zone AF frame (1) appears. 2. Move the AF point or Zone AF frame. Use < > to move the AF point or Zone AF frame into position for focusing (but note that with some lenses, it may not move to the edge of the screen). To center the AF point or Zone AF frame, press < > straight in.
3. Focus and shoot/record. Aim the AF point or Zone AF frame over the subject and press the shutter button halfway. When focus is achieved, the AF point or Zone AF frame will turn green and the beeper will sound. If focus is not achieved, the AF point or Zone AF frame will turn orange.
Magnified View To check the focus, you can magnify display by approx. 5× or 10× by tapping [ ]. Magnification is centered on the AF point for [Spot AF], [1-point AF], [Expand AF area: ], and [Expand AF area: Around], or on the Zone AF frame for Flexible Zone AF. Autofocusing is performed in magnified view if you press the shutter button halfway. When set to Servo AF, pressing the shutter button halfway in magnified view reverts to the normal view for focusing.
AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change before and after autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult. In this case, restart the camera and resume shooting with AF under the light source you will use.
Shooting Conditions That Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under light sources with constantly changing brightness, colors, or patterns.
AF Range The available autofocus range varies depending on the lens used and settings that control the aspect ratio, image quality, 4K movie recording, and Movie digital IS.
Preview AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. 1. Select [ 2. Select [Enable]. : Preview AF]. Caution Fewer shots are available when set to [Enable], because the lens is driven continuously and battery power is consumed.
Touch & Drag AF Settings Touch & Drag AF Positioning Method Active Touch Area You can move the AF point or Zone AF frame by tapping or dragging on the screen as you look through the viewfinder. Touch & Drag AF 1. Select [ 2. Select [Touch & drag AF]. : Touch & drag AF settings]. Select [Enable].
Positioning Method You can set how positions are specified by tapping or dragging. 1. Set [Positioning method]. Absolute The AF point moves to the tapped or dragged position on the screen. Relative The AF point moves in the direction you drag, by an amount corresponding to the amount you drag, no matter where you tap the screen.
Active Touch Area You can specify the area of the screen used for tap and drag operations. 1. Select [Active touch area]. 2. Set the area that will respond to touch. Note A round orange frame [ ] is displayed when you tap the screen with [ : AF area] set to [Whole area AF]. After you lift your finger at the position to move the AF point to, [ ] is displayed and that subject is tracked. To cancel subject selection, tap [ ].
Manual Focus Setting MF peaking (Outline Emphasis) Focus Guide If focusing is not possible with autofocus, you can magnify the image and focus manually. 1. Set the focus mode to < >. For RF lenses without a focus mode switch switch (AF/MF)] set to [Enable] ( ), set the focus • With [ : >. mode switch on the front of the camera to < • With [ : switch (AF/MF)] set to [Disable] ( Focus mode] to [MF].
For RF lenses with a focus mode switch Set the lens's focus mode switch to < switch is now disabled. 2. Magnify the image. Each tap of [ 3. >. The camera's focus mode ] changes the magnification ratio, as follows. Move the magnified area. Use < > to move the magnified area into position for focusing. To center the magnified area, press < 468 > straight in.
4. Focus manually. While looking at the magnified image, turn the lens focusing ring to focus. After focusing, tap [ ] to return to the normal view. Note In magnified view, the exposure is locked. Even when focusing manually, you can use Touch Shutter to shoot.
Setting MF peaking (Outline Emphasis) Edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection. 1. Select [ 2. Select [Peaking]. : MF peaking settings]. Select [On]. 3. Set [Level] and [Color]. Set as necessary.
Caution In magnified view, peaking display is not shown. During HDMI output, peaking display is not shown on equipment connected via HDMI. Note that peaking display is shown on the camera screen when [ : HDMI display] is set to [ + ]. MF peaking may be hard to discern at high ISO speeds, especially when ISO expansion is set. If necessary, lower the ISO speed or set [Peaking] to [Off]. Note Peaking display shown on the screen is not recorded in images.
Focus Guide Setting [ : Focus guide] to [On] provides a guide frame that shows which direction to adjust focus and the extent of adjustment needed. 1. Select [ 2. Select [On]. : Focus guide]. The guide frame is displayed on the face of any person detected as the main subject. To display the guide frame near the eyes of any person detected as the main subject, set [ : Subject tracking] to [Enable] and [ : Eye detection] to [Enable].
The guide frame indicates the current position in focus and adjustment amount as follows.
Adjustment information not detected Caution Under difficult shooting conditions for AF ( ), the guide frame may not be displayed correctly. Higher aperture values are more likely to prevent correct guide frame display. No AF points are displayed while the guide frame is displayed. The guide frame is not displayed in these situations.
Servo AF Characteristics Case Details Case 1: Versatile Multi-Purpose Setting Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Case 4: For Subjects That Accelerate or Decelerate Quickly Case A: Tracking Automatically Adapts to Subject Movement Parameters Adjusting Case Parameters Shooting with AI Servo AF/Servo AF can be easily tailored to your subjects or shooting situations by selecting a Case option.
Case Details Case 1 to Case A are five combinations of settings for “Tracking sensitivity” and “Acceleration/deceleration tracking.” Referring to the following table, select the case for your subject and shooting situation.
Case 1: Versatile Multi-Purpose Setting Default • Tracking sensitivity: 0 • Accel./decel. tracking: 0 Standard setting suited to moving subjects in general. Suitable for many kinds of subjects and scenes. In the following situations, select [Case 2] to [Case 4] instead: non-subjects moving across AF points, elusive subjects, or subjects that suddenly appear or change speed.
Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Default • Tracking sensitivity: Locked on: –1 • Accel./decel. tracking: 0 Setting to continue focusing on the subject even if non-subjects move across AF points, or if the subject strays from AF points. Effective if you prefer the focus not to switch to nonsubjects or the background.
Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Default • Tracking sensitivity: Responsive: +1 • Accel./decel. tracking: +1 Setting to focus on a series of subjects at different distances in the AF points, one after another. Focus switches to any new subject that appears in front of the target subject. Also effective when you want to always focus on the closest subject.
Case 4: For Subjects That Accelerate or Decelerate Quickly Default • Tracking sensitivity: Responsive: 0 • Accel./decel. tracking: +1 Setting to keep tracking and focusing on subjects even if they suddenly change speed. Effective for subjects having sudden movements, sudden acceleration/deceleration, or sudden stops. Note Try setting [Accel./decel. tracking] to [+2] to keep up with subjects that change speed significantly from moment to moment ( ).
Case A: Tracking Automatically Adapts to Subject Movement Useful when you prefer to shoot with parameters set automatically, based on how subjects change. Tracking sensitivity and acceleration/deceleration tracking are set automatically.
Parameters Tracking sensitivity Setting for Servo AF subject-tracking sensitivity in response to non-subjects moving across AF points or subjects straying from AF points. 0 Standard setting. Suitable for moving subjects in general. Locked on: –2 / Locked on: –1 The camera will try to continue focusing on the subject even if non-subjects move across AF points or if the subject strays from the AF points. The –2 setting makes the camera keep tracking the target subject longer than the –1 setting.
Acceleration/deceleration tracking Setting for subject-tracking sensitivity in response to sudden, significant changes in speed, as when subjects suddenly start or stop moving. 0 Suited for subjects that move at a steady speed (minor changes in moving speed). –2 / –1 Suited for subjects that move at a steady speed (minor changes in moving speed). Effective when a setting of 0 makes focus unstable, due to slight subject movement or an obstruction in front of the subject.
Adjusting Case Parameters You can manually adjust the parameters ((1) Tracking sensitivity and (2) Acceleration/ deceleration tracking) for Case 1 to Case 4. 1. Select a case. Turn the < 2. Press the < > dial to select the number of a case to adjust. > button. The selected parameter is outlined in purple. 3. Select a parameter to adjust.
4. Make the adjustment. Default settings are indicated by a light gray [ ] icon. To confirm the adjustment, press the < > button. To return to the screen in step 1, press the < > button. Note To restore default parameter settings for (1) and (2) to each case, press the < > button in step 2, then press the < > button. You can also register (1) and (2) parameter settings to My Menu ( ). This enables you to adjust settings for the selected case.
Customizing AF Functions [ 3] [ 4] [ 6] [ 2] (In Movie Recording) You can configure AF functions in detail to suit your shooting style or subject. [ 3] One-Shot AF release priority You can specify whether to prioritize focus or release timing for One-Shot AF (except when shooting with Touch Shutter). [ ] Focus The picture will not be taken until focus is achieved. Useful when you want to achieve focus before capturing the image.
[ ] Release Prioritizes shutter release over focus. Useful when capturing the decisive moment is most important. Note that the camera shoots whether or not the subject is in focus.
Lens operation when AF is not available You can specify lens operation that applies when autofocusing on a subject is not possible. [ ] Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the precise focus. [ ] Stop focus search If autofocus starts and the focus is far off or if focus cannot be achieved, the lens drive will not be performed. This prevents the lens from becoming grossly out of focus due to the focus search drive.
2. Select an option. [ON] Enable Enables firing of the AF-assist beam, when needed. [OFF] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire the AF-assist beam. [LED] LED AF assist beam only Enables LED AF-assist beam firing by Speedlites equipped with this feature, when these flash units are attached. If your Speedlite is not LED-equipped, the camera's AF-assist beam is fired instead.
[ 4] Limit AF areas You can limit the AF areas available to the areas that you normally use. Select available AF areas and press the < > button to add a checkmark [ ]. Select [OK] to register the setting. For details on AF areas, see AF Area. Caution The [ ] mark cannot be cleared from all items at the same time. Note An asterisk to the right of [ has been modified.
Orientation-linked AF points You can set separate AF areas/points or separate AF point positions for vertical and horizontal shooting. [ ] Same for both vert/horiz The same AF points or Zone AF frames in the same AF areas are used in both vertical and horizontal shooting.
[ 6] Electronic full-time MF Operation of manual focus adjustment using the electronic focusing ring when certain lenses are attached is customizable. Check the Canon website for compatible lenses ( ). Disable Operation of manual focus adjustment corresponds to the [Lens electronic MF] setting. Enable Manual focus adjustment is available whenever camera operations are possible.
[ ] One-Shot→enabled (magnify) You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway. You can magnify the area in focus and adjust the focus manually by turning the lens focusing ring. [ ] Disable in AF mode Manual focus adjustment is disabled when the focus mode switch of the camera or lens is set to < >.
Focusing ring rotation You can reverse the direction that the focusing ring of RF lens is rotated to adjust settings. [ ] Normal [ ] Reverse direction Focusing ring sensitivity of RF lenses You can set the sensitivity of the RF lens focusing ring. [ ] Varies with rotation speed Focusing ring sensitivity varies depending on rotation speed. [ ] Linked to rotation degree The focal position is adjusted based on the amount of rotation, regardless of the rotation speed.
Use as a focusing or control ring Menu-based switching of lens focus/control ring functionality. Caution Available when using lenses that have a combination focusing ring/control ring but have no switch to switch between these features. Use as focus ring The ring works as a focusing ring. Use as control ring The ring works as a control ring. Note Switching is also possible from the Quick Control screen, when customized with [ : Customize Quick Controls] ( ).
[ 2] (In Movie Recording) Movie Servo AF speed You can set the AF speed and operating conditions for Movie Servo AF. The function is enabled when using a lens supporting slow focus transition during movie recording*. When active You can set [Always on] to have the AF speed take effect at all times for movie recording (before and during movie recording) or set [During shooting] to have the AF speed take effect only during movie recording.
Note Operation when inactive is equivalent to when [AF speed] is set to [Standard (0)]. An asterisk “*” to the right of [ : Movie Servo AF speed] indicates that the default setting has been modified. Movie Servo AF tracking sensitivity You can adjust the tracking sensitivity (to one of seven levels), which affects responsiveness if the subject strays from the AF point during Movie Servo AF, as when interfering objects move across AF points or when you pan.
Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. 1. Press the < > button ( ). With an image displayed on the screen, press the < 2. Select the drive mode item. Turn the < > dial to select the drive mode item. 498 > button.
3. Select the drive mode. Turn the < > dial to make a selection. [ ] Single shooting When you hold down the shutter button completely, only one shot will be taken. [ ] High-speed continuous shooting + When you hold down the shutter button completely, you can shoot continuously as described below while you keep holding it down, based on the [ : Shutter mode] setting. • [Mechanical]: max. approx. 15 shots/sec. • [Elec. 1st-curtain]: max. approx. 15 shots/sec. • [Electronic]: max. approx. 23 shots/sec.
*[ ] and [ ] are displayed when the camera is paired with a wireless remote control (sold separately, ). Caution [ ] enables approx. 15 shots/sec. continuous shooting speed when set to [Elec. 1st-curtain] or [Mechanical] under these conditions.
Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. 1. Press the < > button ( ). With an image displayed on the screen, press the < 2. Select the drive mode item. Turn the < 3. > button. > dial to select the drive mode item. Select the self-timer. Turn the < > dial to select the self-timer. : Shoot in 10 sec. : Shoot in 2 sec. : Shoot continuously in 10 sec.
4. Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. Self-timer lamp blinking accelerates and the camera beeps quickly approx. 2 sec. before the picture is taken. Caution With [ ], some conditions in continuous shooting may lengthen the shooting interval, such as image quality and use of flash.
Remote Control Shooting Wireless Remote Control BR-E1 Remote Switch RS-60E3 Remote shooting is supported with Wireless Remote Control BR-E1 or Remote Switch RS-60E3 (Bluetooth and wired connections, respectively; sold separately). Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet from the camera. After pairing the camera and BR-E1 ( ), set the drive mode to [ ] or [ ] for still photo shooting ( ). For movie recording, set [ : Remote control] to [Enable].
Remote Switch RS-60E3 Once connected to the camera, the switch enables you to shoot remotely over a wired connection. For operating instructions, refer to the RS-60E3 instruction manual. 1. Open the terminal cover. 2. Connect the plug to the remote control terminal.
Customizing Operation Switching AF Areas with the Quick Control Dial Choosing One Subject from Several People with the Multi-Controller Adjusting the Zone AF Frame Size This section describes ways to customize AF operation. You can also use a combination of customized settings. Switching AF Areas with the Quick Control Dial You can switch AF areas with the Quick control dial as you look through the viewfinder. 1. In [ 2. Select [Select AF area]. : Customize dials], select [ ].
Note Before switching among Flexible Zone AF 1–3, it is convenient to change the Zone AF frame to your preferred size ( ).
Choosing One Subject from Several People with the Multi-Controller You can choose one subject from several people to lock the tracking frame on that person. Note Before this customization, some other settings must be set as follows. • [AF area]: [Whole area AF] • [Subject tracking]: [On] • [Subject to detect]: [People] • [Eye detection]: [Enable] 1. 2. In [ : Customize buttons], set [ ] to [Direct AF point selection]. Select [ Detail set.], and in [Direct sel. on [Start/stop tracking].
3. Press the shutter button halfway, then release it. A tracking frame ( 4. ) is displayed if multiple subjects are detected. Use the Multi-controller to set your preferred subject. Either press the Multi-controller straight in or press it left or right. The tracking frame changes to [ ] and locks on to that subject for tracking. To release locked tracking, press the Multi-controller.
Adjusting the Zone AF Frame Size You can resize the Zone AF frame displayed for Flexible Zone AF 1–3. 1. Press the < 2. Press the < > button. 3. Press the < > button and select Flexible Zone AF 1, 2, or 3. > button during shooting screen display.
4. Press the < 5. Adjust the Zone AF frame size. Use the < press the < > button. > or < > button. > dial to adjust the Zone AF frame, then To restore the default setting, press the < 510 > button.
Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the playback [ ] tab. Caution Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer.
• Customizing Playback Information Display • Displaying the Highlight Alert • AF Point Display • Playback Grid • Movie Play Count • Still Photo Extraction from RAW Burst Images • HDMI HDR Output 512
Tab Menus: Playback Playback 1 (1) Protect images (2) Erase images (3) Rotate stills (4) Change mov rotate info (5) Rating (6) Print order (7) Photobook Set-up Playback 2 (1) RAW image processing (2) Creative Assist (3) Quick Control RAW processing (4) Cloud RAW image processing (5) Playback creative filters (6) Red-eye correction (7) Resize 513
Playback 3 (1) Cropping (2) HEIF→JPEG conversion Playback 4 (1) Slide show (2) Set image search conditions (3) View from last seen (4) Magnification (5) Image jump w/ 514
Playback 5 (1) Playback information display (2) Highlight alert (3) AF point disp.
In Basic Zone modes, the following screens are displayed for [ Playback 2 (1) Creative Assist (2) Playback creative filters (3) Red-eye correction (4) Resize (5) Cropping Playback 3 (1) Slide show (2) Set image search conditions (3) View from last seen (4) Magnification (5) Image jump w/ 516 2], [ 3], and [ 4].
Playback 4 (1) Playback information display (2) Highlight alert (3) AF point disp.
Image Playback Single-Image Display Shooting Information Display Touch Playback Single-Image Display 1. Switch to playback. Press the < > button. The last image captured or played back is displayed. 2. Browse images. To play back images starting with your most recent shot, turn the < > dial counterclockwise. To play back images starting with the first captured image, turn the dial clockwise. Each time you press the < 518 > button, the display will change.
No information Basic information display Shooting information display 3. Exit image playback. Press the < standby. > button to exit image playback and return to shooting Note Lines indicating the image area are shown on RAW images captured with [ : Still img aspect ratio] set to [1:1], [4:3], or [16:9] ( ). If the search conditions are set with [ : Set image search conditions] ( ), only the filtered images will be displayed.
Shooting Information Display With the shooting information screen displayed ( ), you can press < > up or down to : Playback view other information. You can also customize the information displayed, in [ information display] ( ).
Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < > button to prepare for touch playback.
Magnified view Note You can also magnify display by double-tapping with one finger.
Magnified Image Display Setting the Initial Magnification Ratio Setting the Initial Magnification Position Magnification for Subsequent Images You can magnify display of your captured images. 1. Magnify the image. Press the < > button. The magnified view will appear. The position of the magnified area (1) is displayed in the lower right of the screen, along with [ ]. To magnify images, turn the < > dial clockwise. To reduce magnification, turn the < > dial counterclockwise.
2. Scroll the image. Use < > to scroll around the magnified image. Press the < > or < > button to exit magnified view. Note To switch to other images while maintaining magnified view, turn the < Magnification is not available for movies. 524 > dial.
Setting the Initial Magnification Ratio You can set the initial magnification ratio. 1. Select [ 2. Select [Magnificatn (apx)]. : Magnification].
3. Select an option. 1×, 2×, 4×, 8×, 10× Magnified view starts at the selected magnification ratio. Actual size The recorded image's pixels will be displayed at approx. 100%. Same as last Magnified view resumes from the same ratio as the last time you exited magnified view by pressing < > or < >.
Setting the Initial Magnification Position You can set the initial magnification position. 1. Select [ 2. Select [Magnified position]. : Magnification].
3. Select an option. From center Magnified view starts from the center of the screen. From focus pt Magnified view starts from the AF point in focus. If the photo is taken with manual focus, the magnified view starts from the center of the screen.
Magnification for Subsequent Images You can specify whether to maintain the same position for magnified view or to use the position set in [Magnified position] when displaying subsequent images. 1. Select [ 2. Select [Maintain position]. : Magnification].
3. Select an option. Enable The current magnified position is maintained when displaying subsequent images in magnified view. Disable The position set in [Magnified position] is used when displaying subsequent images in magnified view.
Index Display (Multiple-Image Display) 1. Press the < > button. During image playback, press the < [ 2. > button. ] will be displayed in the lower right of the screen. Switch to the index display. Turn the < > dial counterclockwise. The 4-image index display will appear. The selected image is highlighted with an orange frame. Turning the < > dial further counterclockwise will switch the display from 9 to 36 to 100 images.
3. Browse images. Use < > or the < selection. > dial to move the orange frame for image Press the < > button in the index display to show the selected image in single-image display.
Movie Playback 1. Switch to playback. Press the < 2. > button. Select a movie. Turn the < > dial to select a movie to play. In single-image display, the [ the screen indicates a movie. ] icon displayed in the upper left of In index display, perforations at the left edge of a thumbnail indicate a movie. Movies cannot be played from index display, so press the < > button to switch to single-image display.
3. In single-image display, press the < 4. Select [ > button. ]. The movie will start playing back. Sound is played through the speaker (1). You can pause playback and access the movie playback panel by pressing the < > button ( ). Press it again to resume the playback. Press the < playback).
Movie playback panel Item Playback Skip backward Playback Operations Pressing the < > button toggles between playing movies and stopping playback. >. Holding Skips backward approx. 1 sec. each time you press < < > down will rewind the movie. Previous frame Displays the previous frame each time you turn the < Next frame Displays the next frame each time you turn the < > dial right. Skips forward approx. 1 sec. each time you press < >. Holding Skip forward < > dial left.
Controls not on the previous screen are as follows. Item Edit Slow motion Frame Grab Playback Operations Displays the editing screen ( ). Adjust the slow motion speed by turning the < > dial. The slow motion speed is indicated in the upper right of the screen. Available when you play 4K movies. Enables you to extract the current frame and save it as a JPEG or HEIF still image ( ). Press the < > button to return to the previous screen.
Editing a Movie's First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. 1. Pause movie playback. The movie playback panel will appear. 2. Press the < > button, then select [ 538 ].
3. Specify the part to be edited out. Select either [ ] (Cut beginning) or [ ] (Cut end). Press < > left or right to go back or forward one frame. Keep pressing the Multi-controller to fast rewind or fast forward frames. Each turn of the < > dial goes back or forward one frame. After deciding which part to edit out, press the < > button. The portion indicated by a line at the bottom of the screen will remain. 4. Check the edited movie. Select [ ] to play back the edited movie.
5. Save. Select [ ] (1). The save screen will appear. To save it as a new file, select [New file], or to save it and overwrite the original movie file, select [Overwrite]. Select [ ] (2) to save a compressed version of the file. 4K movies are converted to Full HD movies before compression. On the confirmation screen, select [OK] to save the edited movie and return to the movie playback screen. Caution Because editing is performed in approx. 1 sec.
Frame Extraction from 4K Movies or 4K Time-Lapse Movies From 4K or 4K time-lapse movies, you can select individual frames to save as JPEG or HEIF still images. This function is called “Frame Grab.” 1. Select a 4K movie or 4K time-lapse movie. Turn the < > dial to make a selection. On the shooting information screen ( ), 4K movies and 4K time-lapse movies are indicated by [ ] or [ ]. In index display, press the < display. > button to switch to single-image 2. In single-image display, press the < 3.
4. Press the < > button to pause the movie. The movie playback panel will appear. 5. Select a frame to grab. Use the movie playback panel to select the frame to grab as a still image. For movie playback panel instructions, see Movie playback panel. 6. Press the < > button, then select [ 542 ].
7. Save. Select [OK] to save the current frame as a JPEG still image. HEIF images are saved if you grab frames from movies recorded with [ : HDR shooting ] set to [Enable]. Check the destination folder and image file number. 8. Select the image to display. Select [View original movie] or [View extracted still image]. Caution Frame grabbing is not possible from the following 4K movies. • Movies recorded with other cameras Frame grabbing is not possible while the camera is connected to a computer.
Playback on a TV Set By connecting the camera to a television with a commercially available HDMI cable, you can play back the captured still photos and movies on the television. If the image does not appear on the TV screen, confirm that [ : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television). 1. Connect the HDMI cable to the camera. Insert the HDMI cable in the camera's < 2. > terminal. Connect the HDMI cable to the television.
5. Press the < > button. Images are now displayed on the television, with nothing displayed on the camera screen. The images will automatically be displayed at the optimum resolution matching the connected television. Caution Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television.
Protecting Images Protecting Individual Images Specifying the Range of Images to Protect Protecting All Images in a Folder or on a Card You can protect important images from being accidentally erased. Caution If you format the card ( ), the protected images will also be erased. Note Once an image is protected, it cannot be erased by the camera's erase function. To erase a protected image, you must first cancel the protection. If you erase all the images ( ), only the protected images will remain.
2. Select [Select images]. 3. Select the image to protect. Turn the < 4. > dial to select an image to protect. Protect the image. Press the < > button to protect the selected image, after which it will be labeled with a [ ] icon (1) at the top of the screen. To cancel protection and clear the [ again. ] icon, press the < > button To protect another image, repeat steps 3 and 4. Note During playback, you can press the < Quick Control screen.
Specifying the Range of Images to Protect While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. 1. Select [Select range]. Select [Select range] in [ 2. : Protect images]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). The images in the specified range will be protected and the [ ] icon will appear.
Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ images], all the images in the folder or on the card will be protected. : Protect To cancel protection, select [Unprotect all images in folder] or [Unprotect all images on card]. If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images] and [Unprotect all found].
Erasing Images Erasing Images Individually Selecting ([ ]) Multiple Images to Erase Together Specifying the Range of Images to Erase Erasing All Images in a Folder or on a Card You can either select and erase unnecessary images individually or erase them in one batch. Protected images ( ) will not be erased. Caution Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.
3. Press the < 4. Erase the images. > button. JPEG/HEIF/RAW images or movies Select [Erase]. RAW+JPEG/RAW+HEIF images Select an option. Series of images captured in [ ], [ ], or [ ] drive mode are erased when you select [Erase scene including image] during playback.
Selecting ([ ]) Multiple Images to Erase Together By adding checkmarks to the images to be erased, you can erase all those images at once. 1. Select [ 2. Select [Select and erase images]. 3. Select an image. : Erase images]. Turn the < > dial to select an image to erase, then press the < > button. To select another image to be erased, repeat step 3. Press the < > button.
4. Erase the images. Select [OK].
Specifying the Range of Images to Erase While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. 1. Select [Select range]. Select [Select range] in [ 2. : Erase images]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
4. Erase the images. Select [OK].
Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ all the images in the folder or on the card will be erased. : Erase images], If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images]. ), the • If you select [All found images], all the images filtered by the search conditions will be erased.
Rotating Still Photos You can use this feature to rotate the displayed image to the desired orientation. 1. Select [ 2. Select an image to rotate. : Rotate stills]. Turn the < > dial to select the image.
3. Rotate the image. Each time you press the < > button, the image is rotated clockwise as follows: 90° → 270° → 0°. To rotate another image, repeat steps 2 and 3. Note If you set [ : Auto rotate] to [On ] ( ) before taking pictures, you need not rotate the image with this function. If the rotated image is not displayed in the rotated orientation during image ]. playback, set [ : Auto rotate] to [On Movies cannot be rotated.
Changing Movie Orientation Information You can manually edit movie playback orientation information (which determines which side is up). 1. Select [ 2. Select a movie. : Change mov rotate info]. Turn the < change.
3. Change the orientation information. As you watch the camera and icon in the upper left of the screen, press the < > button to specify which side is up. Each press of the < > button edits the movie rotation information as follows: [ ] → [ ] → [ ]. Caution Movies are played horizontally on the camera and via HDMI video output, regardless of the [ : Add rotate info] setting ( ). Movie orientation information of movies recorded with other cameras cannot be edited with this camera.
Rating Images Rating Individual Images Rating by Specifying the Range Rating All Images in a Folder or on a Card You can rate images on a scale of 1–5 ( / / * Rating images can help you organize them. Rating Individual Images 1. Select [ 2. Select [Select images]. : Rating]. 561 / / ). This function is called rating.
3. Select the image to be rated. Turn the < 4. > dial to select the image to be rated. Rate the image. Press the < shown. > button so that the current rating is outlined in blue, as Turn the < button. > dial to select a rating mark, then press the < > When you append a rating mark to the image, the number beside the set rating will increase by one. To rate another image, repeat steps 3 and 4.
Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. 1. Select [Select range]. Select [Select range] in [ 2. : Rating]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. To select other images, repeat step 2. 3.
4. Rate the image. Turn the < > dial to select a rating mark, then select [OK]. All the images in the specified range will be rated (same rating) at once.
Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated. Turn the < > dial to select a rating, then select [OK]. When you are not rating images or canceling the rating, select [ ]. If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images].
Note Values next to ratings are displayed as [###] if more than 1,000 images have that rating. With [ : Set image search conditions] and [ : Image jump w/ ], you can display only the images given a specific rating.
Print Ordering (DPOF) Print Options Selecting Images for Printing DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing.
3. Set the options as desired. Set [Print type], [Date], and [File No.] options. Print type Date File No. 4. On Off On Off Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Both Prints both the standard and index prints. [On] imprints the recorded date of the captured image. [On] imprints the file number. Exit the setting. Press the < > button. Next, select [Sel.Image] or [Multiple] to specify the images to be printed.
Caution If you print an image with a large image size using the [Index] or [Both] setting ( ), the index print may not be printed with certain printers. In this case, resize the image ( ), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted, depending on the print type setting and printer. With [Index] prints, the [Date] and [File No.] cannot both be set to [On] at the same time.
Selecting Images for Printing Selecting images Select and specify the images individually. Press the < > button to save the print order to the card. Standard/Both (1) Quantity (2) Total images selected Press the < > button to set the print quantity for the current image to 1. By turning the > dial, you can set a print quantity of up to 99 copies. < Index (3) Checkmark (4) Index icon Images that you add a checkmark [ index printing.
Selecting multiple images Select range Select [Select range] in [Multiple]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be specified for printing. All images in a folder Select [Mark all in folder] and select the folder. A print order for one copy of all the images in the folder will be specified.
Photobook Set-up Specifying Individual Images Specifying the Image Range for a Photobook Specifying All Images in a Folder or on a Card You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online. Specifying Individual Images 1. Select [ 2. Select [Select images]. : Photobook Set-up].
3. Select an image for the photobook. Use the < > dial to select an image for the photobook, then press the < > button. To select other images to be specified for a photobook, repeat step 3.
Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. 1. Select [Multiple]. Select [Multiple] in [ 2. : Photobook Set-up]. Select [Select range].
3. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at once for a photobook. All images in the folder or on the card are specified for the photobook when you select [All images in folder] or [All images on card] in the [Multiple] option for [ : Photobook Setup]. To cancel the selection, select [Clear all in folder] or [Clear all on card].
RAW Image Processing Magnified View Processing Images with Specified Aspect Ratios RAW Image Processing Options You can process or images with the camera to create JPEG or HEIF images. The RAW images remain the same as when captured, so you can adjust the processing conditions to create as many JPEGs as needed. You can also use Digital Photo Professional (EOS software) to process RAW images. Caution Processing into HEIF is not available for expanded ISO speed (H). 1. Select [ or : RAW image processing].
2. Select an option, then select images. You can select multiple images to process at once. Select images Turn the < > dial to select an image to process, then press the < > button. Press the < > button. Select range Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. To process other images, repeat this step. Press the < > button.
3. Set the desired processing conditions. Use shot settings Images are processed using image settings at the time of capture. Images captured with [ : HDR shooting ] set to [Enable] are processed to create HEIFs, and images captured with this function set to [Disable] are processed to create JPEGs. Set up processing→JPEG/Set up processing→HEIF Use < > to select an item. Turn the < > or < Press the < > button to access the function setting screen. > dial to switch the setting.
4. Save. When using [Set up processing→JPEG] or [Set up processing→HEIF], select [ ] (Save). Read the message and select [OK]. To process other images, select [Yes] and repeat steps 2–4. 5. Select the image to display. Select [Original image] or [Processed img.]. Your selected image is displayed.
Magnified View You can magnify images displayed for [Set up processing→JPEG] or [Set up processing→HEIF] by pressing the < > button. The magnification ratio varies depending on the [Image quality] setting. With < >, you can scroll around the magnified image. To cancel the magnified view, press the < > button again. Caution Results of processing with [Digital Lens Optimizer] set to [High] are only applied in magnified view. Results are not applied in normal display.
Processing Images with Specified Aspect Ratios JPEG or HEIF images at the specified aspect ratio are created when you process RAW images captured with [ : Still img aspect ratio] ( ) set to [1:1], [4:3], or [16:9].
RAW Image Processing Options : Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. : White balance ( ) You can select the white balance. Selecting [ ] enables you to select [Auto: Ambience priority] or [Auto: White priority]. If you select [ ], you can set the color temperature. : Picture Style ( ) You can select the Picture Style. You can adjust the sharpness, contrast, and other parameters.
: Lens aberr correction • : Peripheral illum corr ( ) A phenomenon that makes the image corners look darker due to the lens characteristics can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image ( ) and check the four corners. Less correction is applied than for maximum correction with Digital Photo Professional (EOS software, ).
• : Diffraction correction ( ) The diffraction by the lens aperture degrading the image sharpness can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image ( ). Caution Processing RAW images in the camera will not produce exactly the same results as processing RAW images with Digital Photo Professional (EOS software). If you perform [Brightness adjustment], noise, banding, etc. may be intensified with the effects of adjustment.
Creative Assist You can process RAW images by applying your preferred effects and saving as JPEGs. 1. Select [ 2. Select an image. : Creative Assist]. Turn the < > dial to select an image to process, then press the < > button.
3. Select an effect. Use the < > dial to select the effect. By selecting [Preset] and pressing the < > button, you can choose [VIVID], [SOFT], or other preset effects. [AUTO1], [AUTO2], and [AUTO3] are effects recommended by the camera based on image conditions. You can select effects such as [Brightness] or [Contrast] by pressing the < > button and then using the < > dial. Press the < > button when adjustment is finished.
To reset the settings, press the < > button and select [OK] after a confirmation message is displayed. To confirm the effect, press the < 4. Select [OK] to save the image. 588 > button.
Quick Control RAW Processing You can select the type of RAW image processing performed from the Quick Control screen. 1. Select [ : Quick Control RAW processing].
2. Select an option. Creative Assist RAW processing that applies your preferred effect ( ). RAW image processing RAW processing according to conditions you specify ( 590 ).
Cloud RAW Image Processing Checking Processing Capacity Adding Images to Process Checking/Removing Selected Images Uploading Images You can upload or images to image.canon for processing into JPEG or HEIF images. The RAW images remain the same as when captured, so you can adjust the processing conditions to create as many JPEGs or HEIFs as needed. Caution Complimentary enrollment at image.canon must be completed in advance. Note that cloud RAW image processing requires a paid subscription.
1. Select [ 2. Select [Check proc. capacity (refresh)]. : Cloud RAW image processing]. The camera accesses image.canon.
3. Check the quantity in [Proc. capacity]. Information in [Proc. capacity] is updated. Caution [Proc. capacity] is [0] unless you have a paid subscription for cloud RAW image processing. You will receive subscription information at the email address on record at image.canon if you check the processing capacity without a subscription.
Adding Images to Process 1. Select [Add images to process].
2. Select an option, then select images. You can select multiple images to process at once. Select images Turn the < > dial to select an image to process, then press the < > button. Press the < > button. Select range Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. To process other images, repeat this step. Press the < > button.
3. Set the desired processing conditions. Use shot settings Images are processed using image settings at the time of capture. Images captured with [ : HDR shooting ] set to [Enable] are processed to create HEIFs, and images captured with this function set to [Disable] are processed to create JPEGs. Set up processing→JPEG/Set up processing→HEIF Use < > to select an item. Turn the < > or < Press the < > button to access the function setting screen. > dial to switch the setting.
Comparison screen You can switch between the [After change] and [Shot settings] screens by pressing the < > button and turning the < > or < > dial. Items in orange on the [After change] screen have been modified since the time of capture. Press the < screen. 4. > button to return to the processing conditions Select [Save]. When using [Set up processing→JPEG] or [Set up processing→HEIF], select [ ] (Save). Read the message and select [OK]. 5. Add to the upload list. Read the message and select [OK].
Checking/Removing Selected Images 1. Select [Check/remove selected images]. 2. Browse your images. Turn the < > dial to check images. To remove from the upload list, press the < [ ] is displayed. > button. To check image processing conditions, press the < 598 > button.
3. Remove the current image from the upload list as needed. Press the < > button. Select [OK] when a message is displayed about removing images from the upload list.
Uploading Images 1. Select [Send]. 2. Read the message. Read the message, then tap [Send]. Caution The number of images and processing capacity may not be updated correctly if an [Err 138] transmission error occurs during uploading. Note that even if the number of images and processing capacity are not updated correctly, images may be processed on the server. To check the processing status, use the image.canon app.
Playback Creative Filters Creative Filter Characteristics You can apply the following filter processing to an image and save it as a separate image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. 1. Select [ 2. Select an image. : Playback creative filters]. Turn the < > dial to select an image, then press the < Images can be selected by touch from index display ( 601 ). > button.
3. Select a filter effect ( 4. Adjust the filter effect. ). Adjust the filter effect, then press the < > button. For [Miniature effect], turn the < > dial to move the white frame > enclosing the area to keep in sharper focus, then press the < button. 5. Save. Select [OK]. Check the destination folder and image file number, then select [OK]. To apply filter processing to other images, repeat steps 2–5.
Note RAW images cannot be selected. Note that for images captured in RAW+JPEG shooting, filter processing is applied to the JPEG image before saving the results. Images processed using the fish-eye effect filter will not have Dust Delete Data ( ) appended.
Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. Fish-eye effect Gives the effect of a fish-eye lens. The image will have barrel distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
Red-Eye Correction Automatically corrects relevant portions of images affected by red-eye. The image can be saved as a separate file. 1. Select [ 2. Turn the < : Red-eye correction]. > dial to select the image. After image selection, press the < > button. White frames are displayed around corrected image areas.
3. Select [OK]. The image is saved as a separate file. Caution Some images may not be corrected accurately.
Resizing JPEG/HEIF Images You can resize a JPEG or HEIF image to reduce the pixel count and save it as a new image. Resizing is available for , , or JPEGs or HEIFs (in sizes except ), including those captured in RAW+JPEG and RAW+HEIF shooting. images and RAW images or movies cannot be resized. 1. Select [ 2. Select an image. : Resize]. Turn the < > dial to select the image to resize. Press the < > button to display the image size.
3. Select the desired image size. Select the desired image size (1). 4. Save. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4.
Cropping JPEG/HEIF Images You can crop a captured JPEG image and save it as another image. Cropping is available for JPEG or HEIF images. RAW images and frame-grab images from 4K movies cannot be cropped. 1. Select [ 2. Select an image. : Cropping]. Turn the < > dial to select the image to crop. Press the < > button to display the cropping frame.
3. Set the cropping frame. The image area within the cropping frame will be cropped. Resizing the cropping frame size Turn the < > dial to resize the cropping frame size. The smaller the cropping frame, the more magnified the cropped image will look. Correcting tilt You can correct image tilt by ±10°. Turn the < > dial to select [ ], > button. While checking tilt relative to the grid, turn then press the < the < > dial (in 0.1° increments) or tap the left or right arrow (in 0.
4. Check the image area to be cropped. Turn the < > dial to select [ image area to crop is displayed. 5. ], then press the < > button. The Save. Turn the < > dial to select [ ], then press the < > button. Select [OK] to save the cropped image. Check the destination folder and image file number, then select [OK]. To crop another image, repeat steps 2 to 5. Caution The position and size of the cropping frame may change depending on the angle set for tilt correction.
Converting HEIF to JPEG You can convert HEIF images captured in HDR shooting and save them as JPEG images. 1. Select [ 2. Select an image. : HEIF→JPEG conversion]. Turn the < > dial to select an HEIF image to convert to JPEG. Press the < > button to convert to JPEG.
3. Save. Select [OK] to save the JPEG image. • Check the destination folder and image file number, then select [OK]. • To convert another image, repeat steps 2 and 3. Note Some scenes may look different after conversion if the original and converted images are compared. Conversion is not available for cropped images, or for frame-grab images from 4K movies.
Slide Show You can play back the images on the card as an automatic slide show. 1. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ : Set image search conditions] ( ). 2. Select [ : Slide show].
3. Set the playback as desired. Select [Set up]. Set the [Display time] and [Repeat] (repeated playback) settings for the still photos. After completing the settings, press the < Display time Repeat 615 > button.
4. Start the slide show. Select [Start]. After [Loading image...] is displayed, the slide show will start. 5. Exit the slide show. To exit the slide show and return to the setting screen, press the < > button. Note To pause the slide show, press the < > button. During pause, [ ] will be > button again to resume displayed in the upper left of the screen. Press the < the slide show. During the automatic playback of still photos, you can press the < > button to switch the display format ( ).
Setting Image Search Conditions Clearing the Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images. 1. Select [ : Set image search conditions].
2. Set the search conditions. Turn the < > dial to select an option. Turn the < > dial to set the option. A checkmark [ ] (1) is appended to the left of the option. (Specified as the search condition.) If you select the option and press the < > button, the checkmark [ ] will be removed (which cancels the search condition). Option Description Rating Displays images with the selected (rating) condition. Date Displays images taken on the selected shooting date.
3. Apply the search conditions. Press the < > button and read the message displayed. Select [OK]. The search condition is applied. 4. Display the found images. Press the < > button. Only the images that match the set conditions (filtered) will be played back. When the images are filtered for display, the screen will have an outer yellow frame (2). Caution If no images match the search conditions, pressing the < no effect.
Note Search conditions may be cleared after operations involving camera power or card changes and editing, adding, or erasing images. Auto power off time may be extended while the [ : Set image search conditions] screen is displayed. Clearing the Search Conditions Access the screen in step 2, then press the < 620 > button to clear all the search conditions.
Resuming from Previous Playback 1. Select [ 2. Select an option. : View from last seen]. [Enable]: Playback resumes from the last image displayed (unless you have just finished shooting). [Disable]: Playback resumes from your most recent shot whenever the camera is restarted.
Browsing Images with the Main Dial In single-image display, you can turn the < backward according to the jump method set. 1. Select [ 2. Select the jump method. > dial to jump through the images forward or : Image jump w/ ]. Note With [Jump images by the specified number], you can turn the < > dial to select the number of images to jump by. With [Display by image rating], turn the < > dial to select the rating ( ). Selecting will show all rated images as you browse.
3. Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial. You can browse by the jump method set. Note You can also change the jump method by pressing < playback.
Customizing Playback Information Display Histogram You can specify screens and accompanying information displayed during image playback. 1. Select [ 2. Add a checkmark [ : Playback information display]. ] next to the number of screens to display. Select numbers with the < > dial. Press the < > button to clear a checkmark [ a checkmark [ ]. Repeat these steps to add a checkmark [ screen to display, then select [OK]. ].
Histogram The histograms show signal levels across the tonal range. Brightness display (for checking the general exposure level and overall gradation) and RGB display (for checking saturation and gradation of red, green, and blue) are available. You can switch the histogram displayed by pressing the < > button when [ ] is displayed in the lower left of the [ : Playback information display] screen.
[Brightness] display This histogram is a graph showing the distribution of the image's brightness level, with the horizontal axis indicating the brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each brightness level. The more pixels there are toward the left, the darker the image, and the more pixels there are toward the right, the brighter the image.
[RGB] display This histogram is a graph showing the distribution of each primary color's brightness level in the image (RGB or red, green, and blue), with the horizontal axis indicating the color's brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each color brightness level. The more pixels there are toward the left, the darker and less prominent the color, and the more pixels there are toward the right, the brighter and denser the color.
Displaying the Highlight Alert You can specify blinking display of overexposed highlights on the playback screen. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result. 1. Select [ 2. Select [Enable]. : Highlight alert].
AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. 1. Select [ 2. Select [Enable]. : AF point disp.].
Playback Grid You can display a grid over still photos shown in single-image display on the playback screen. This function is convenient for checking the image's vertical or horizontal tilt as well as composition. 1. Select [ 2. Select an option. : Playback grid]. Note When panoramic images are displayed, a single vertical and horizontal line are shown if [Playback grid] is set to an option other than [Off].
Movie Play Count You can select how time is displayed on the movie playback screen. 1. Select [ : Movie play count].
2. Select an option. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except when High Frame Rate movies are set to [Free run]), regardless of the [Movie rec count] setting. The [Movie play count] setting in [ : Time code] is linked to the [ : Movie play count], so that these settings always match. The “frame” count is not displayed during movie recording or playback.
Still Photo Extraction from RAW Burst Images You can extract any image from the sets (“rolls,” as a JPEG, HEIF, or RAW image. 1. Display the image. Press the < 2. ) that are captured in RAW burst mode > button. Select a roll. Turn the < > dial to select a roll. In single-image display, rolls are identified by a [ upper left. In index display, press the < display.
4. Select [ ]. The roll is played. 5. Select an image. Turn the < > dial to select the image to extract. To delete unneeded portions at the beginning and end of the roll, press the < > button. 6. Press the < > button.
7. Select an image format and save the extracted image. With [Extract as ] or [Extract as ], you can choose [Edit and save] and apply RAW image processing ( ) before saving. Note Images are saved in [ ] quality when you select [Extract as ] or [Extract as ]. Creative filters, cropping, and resizing are not available for JPEG/HEIF images extracted from RAW burst images or processed from extracted RAW images. HEIF images extracted from RAW burst images cannot be converted to JPEGs.
HDMI HDR Output You can view RAW or HEIF images in HDR by connecting the camera to an HDR TV. 1. Select [ 2. Select [On]. : HDMI HDR output]. Note Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual. Depending on the TV used, images may not look as expected. On HDR TVs, some information may not be displayed. Quick Control RAW processing of displayed images is recommended if you will process RAW images while viewing HDMI HDR output.
Wireless Features This chapter describes how to connect the camera to a smartphone wirelessly via Bluetooth® or Wi-Fi® and send images to devices or Web services, how to control the camera from a computer or wireless remote control, and other operations. Caution Important Note that Canon cannot be held liable for any loss or damage caused by erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
• Wireless Communication Status 638
Tab Menus: Wireless Features Wireless features 1 (1) Wi-Fi/Bluetooth connection (2) Airplane mode (3) Wi-Fi settings (4) Bluetooth settings (5) Nickname (6) GPS device settings (7) Reset communication settings Caution Wireless communication is not available while the camera is connected via an interface cable to a computer or other device. Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi.
Wi-Fi/Bluetooth Connection 1. Select [ 2. Select an option for the camera to connect to. : Wi-Fi/Bluetooth connection]. Connect to smartphone ( ) Control the camera remotely and browse images on the camera over a Wi-Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones” in this manual).
Upload to Web service ( ) Images can be sent directly from the camera to the image.canon cloud service for Canon customers after you complete member registration (free of charge). Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services.
Connecting to a Smartphone Turning on Bluetooth and Wi-Fi on a Smartphone Installing Camera Connect on a Smartphone Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Camera Connect Functions Maintaining a Wi-Fi Connection When the Camera Is Off Canceling the Pairing Wi-Fi Connection without Using Bluetooth Automatic Image Transfer as You Shoot Sending Images to a Smartphone from the Camera Terminating Wi-Fi Connections Settings to Make Images Viewable from Smartphones You can do the following after
Turning on Bluetooth and Wi-Fi on a Smartphone Turn on Bluetooth and Wi-Fi from the smartphone settings screen. Note that pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed. Use the latest version of the smartphone OS. Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Steps on the camera (1) 1. Select [ 2. Select [ Connect to smartphone]. 3. Select [Add a device to connect to]. : Wi-Fi/Bluetooth connection].
4. Select an option. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect.
5. Select [Pair via Bluetooth]. Press the < > button to start pairing. To pair with a different smartphone after pairing with one initially, select [OK] on the screen shown above.
Steps on the smartphone (1) 6. Start Camera Connect. 7. Tap the camera for pairing. In Android, go to Steps on the camera (2). 8. Tap [Pair] (iOS only).
Steps on the camera (2) 9. 10. Select [OK]. Press the < > button. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen.
Caution The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see Reconnecting via Wi-Fi/Bluetooth. Bluetooth connection consumes battery power even after the camera's auto power off is activated. Therefore, the battery level may be low when you use the camera. Troubleshooting pairing Keeping pairing records for previously paired cameras on your smartphone will prevent it from pairing with this camera.
Steps on the smartphone (2) 11. Tap a Camera Connect function. In iOS, tap [Join] when a message is displayed to confirm camera connection. An error message may be displayed on the smartphone even if Camera Connect is connected. If so, close the error message and continue using the app. For the Camera Connect functions, see Camera Connect Functions. When a Wi-Fi connection is established, the screen for the selected function will appear. [ Wi-Fi on] is displayed on the camera screen.
For how to terminate the Wi-Fi connection, see Terminating Wi-Fi Connections. Terminating the Wi-Fi connection will switch the camera to the Bluetooth connection. To reconnect via Wi-Fi, start Camera Connect and tap the function you will use. [ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error.
Camera Connect Functions Images on camera Images can be browsed, deleted, or rated. Images can be saved on a smartphone. Effects can be applied to RAW images and saved to a smartphone (Creative Assist). Remote live view shooting Enables remote shooting as you view a live image on the smartphone. Auto transfer Enables camera and app setting adjustment for automatic transfer of your shots ( ). Bluetooth remote controller Enables remote control of the camera from a smartphone paired via Bluetooth.
Maintaining a Wi-Fi Connection When the Camera Is Off Even when the camera power switch is set to < >, as long as it is paired to a smartphone via Bluetooth, you can use the smartphone to connect via Wi-Fi and browse images on the camera or perform other operations. If you prefer not to connect via Wi-Fi to the camera when it is off, either set [Airplane mode] to [On] or set [Bluetooth settings] to [Disable].
Canceling the Pairing Cancel pairing with a smartphone as follows. 1. Select [ 2. Select [ Connect to smartphone]. : Wi-Fi/Bluetooth connection]. If the history ( ) is displayed, switch screens with the < < > as needed. 3. Select [Edit/delete device].
4. Select the smartphone to cancel pairing with. Smartphones currently paired with the camera are labeled [ ]. 5. Select [Delete connection information]. 6. Select [OK]. 7. Clear the camera information on the smartphone. In the smartphone's Bluetooth setting menu, clear the camera information registered on the smartphone.
Wi-Fi Connection without Using Bluetooth Steps on the camera (1) 1. Select [ 2. Select [ Connect to smartphone]. : Wi-Fi/Bluetooth connection]. If the history ( ) is displayed, switch screens with the < < > as needed. 3. Select [Add a device to connect to].
4. Select an option. If Camera Connect is already installed, select [Do not display]. 5. Select [Connect via Wi-Fi]. 6. Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Go to step 6 in Wi-Fi Connection via Access Points.
Steps on the smartphone 7. Operate the smartphone to establish a Wi-Fi connection. Smartphone's screen (sample) Activate the smartphone's Wi-Fi function, then tap the SSID (network name) checked in step 6 in Steps on the camera (1). For the password, enter the password checked in step 6 in Steps on the camera (1). 8. Start Camera Connect and tap the camera to connect to via Wi-Fi.
Steps on the camera (2) 9. Select [OK]. To specify viewable images, press the < > button. Configure as described in Settings to Make Images Viewable from Smartphones, starting in step 5. The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect ( ). For how to terminate the Wi-Fi connection, see Terminating Wi-Fi Connections. To reconnect via Wi-Fi, see Reconnecting via Wi-Fi/Bluetooth.
Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. 1. Select [ 2. Select [Send to smartphone after shot]. 3. Set [Auto send] to [Enable]. : Wi-Fi settings].
4. Set [Size to send]. 5. Take the picture.
Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. 1. Switch to playback. 2. Press the < 3. Select [ > button. Send images to smartphone]. If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection. 4. Select sending options and send the images.
(1) Sending images individually 1. Select an image to send. Turn the < button. > dial to select an image to send, then press the < Images can be selected by touch from index display ( 2. ). Select [Send img shown]. In [Size to send], you can select the image sending size. When sending movies, you can select the image quality of movies to send in [Quality to send].
(2) Sending multiple selected images 1. Press the < 2. Select [Send selected]. > button.
3. Select images to send. Turn the < button. > dial to select an image to send, then press the < Images can be selected by touch from three-image display ( After selecting the images to send, press the < 666 ). > button.
4. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 5. Select [Send].
(3) Sending a specified range of images 1. Press the < 2. Select [Send range]. 3. Specify the range of images. > button. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. Images can be selected by touch from index display ( 668 ).
4. Confirm the range. Press the < 5. > button. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 6. Select [Send].
(4) Sending all images on the card 1. Press the < 2. Select [Send all card]. > button.
3. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 4. Select [Send].
(5) Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. 1. Press the < 2. Select [Send all found]. > button.
3. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 4. Select [Send].
Ending image transfer Sending images from the camera when paired via Bluetooth (Android devices only) Press the < > button on the image transfer screen. Select [OK] to end image transfer and the Wi-Fi connection. Sending images from the camera over a Wi-Fi connection Press the < > button on the image transfer screen. To terminate the Wi-Fi connection, see Terminating Wi-Fi Connections.
Note You can cancel the image transfer by selecting [Cancel] during the transfer. You can select up to 999 files at a time. With a Wi-Fi connection established, disabling the smartphone's power saving function is recommended. Selecting the reduced size for still photos applies to all still photos sent at that time. Note that size still photos are not reduced. Selecting compression for movies applies to all movies sent at that time. Note that and movies are not reduced.
Terminating Wi-Fi Connections Perform either of the following operations. On the Camera Connect screen, tap [ ]. On the [ Wi-Fi on] screen, select [Disconnect,exit]. If the [ Wi-Fi on] screen is not displayed, select [ : Wi-Fi/Bluetooth connection]. Select [Disconnect,exit], then select [OK] on the confirmation screen.
Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. 1. Select [ 2. Select [ Connect to smartphone]. : Wi-Fi/Bluetooth connection]. If the history ( ) is displayed, switch screens with the < < > as needed. 3. Select [Edit/delete device].
4. Select a smartphone. Select the name of the smartphone on which you want to make the images viewable. 5. Select [Viewable imgs].
6. Select an option. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified. When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable. Press the < >< > keys to specify the number of days, then press < > to confirm the selection.
[Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images. 1.Press the < > button to display the image selection screen. Turn the < > dial to select the image.
Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie recording mode will continue. • Any movie recording in progress in still photo shooting mode will end. With a Wi-Fi connection to a smartphone established, certain functions are unavailable. In remote shooting, the AF speed may become slower. Depending on the communication status, image display or shutter release timing may be delayed.
Connecting to a Computer via Wi-Fi Operating the Camera Using EOS Utility This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection. For computer operating instructions, refer to the computer user manual.
3. Select [Add a device to connect to]. 4. Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen.
Steps on the computer (1) 5. Select the SSID, then enter the password. Computer's screen (sample) On the computer's network setting screen, select the SSID checked in step 4 in Steps on the camera (1). For the password, enter the password checked in step 4 in Steps on the camera (1).
Steps on the camera (2) 6. Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected.
Steps on the computer (2) 7. Start EOS Utility. 8. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is displayed, select [Yes]. 9. Click [Connect]. Select the camera to connect to, then click [Connect].
Steps on the camera (3) 10. Establish a Wi-Fi connection. Select [OK].
[ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. Operate the camera using EOS Utility on the computer. To reconnect via Wi-Fi, see Reconnecting via Wi-Fi/Bluetooth. Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur.
Connecting to a Printer via Wi-Fi Image Printing Print Settings This section describes how to print images by directly connecting the camera to a printer supporting PictBridge (Wireless LAN) via Wi-Fi. For printer operating instructions, refer to the printer user manual. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Print from Wi-Fi printer]. If the history ( ) is displayed, switch screens with the < < > as needed.
3. Select [Add a device to connect to]. 4. Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. 5. Set up the printer. In the Wi-Fi settings menu of the printer to be used, select the SSID you have checked. For the password, enter the password checked in step 4.
6. Select the printer. In the list of detected printers, select the printer to connect to via Wi-Fi. If your preferred printer is not listed, selecting [Search again] may enable the camera to find and display it. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
Image Printing Printing images individually 1. Select the image to be printed. Turn the < button. > dial to select an image to print, then press the < Images can be selected by touch from index display ( 2. Select [Print image]. 692 ).
3. Print the image. For the print setting procedures, see Print Settings. Select [Print], then [OK] to start printing.
Printing according to specified image options 1. Press the < 2. Select [Print order]. 3. Set the printing options. > button. For the print setting procedures, see Print Ordering (DPOF). If the print order is complete before establishing a Wi-Fi connection, go to step 4.
4. Select [Print]. [Print] can be selected only when an image is selected and the printer is ready to print. 5. Configure [Paper settings] ( 6. Print the image. ). When [OK] is selected, printing starts. Caution Shooting is not possible while connected to a printer via Wi-Fi. RAW images, HEIF images, and movies cannot be printed. Before printing, be sure to set the paper size. File number printing may not be supported by certain printers.
Note When you use a battery to power the camera, make sure it is fully charged. It may take some time until printing starts after you select [Print], depending on file size and image quality. To stop printing, press the < > button while [Cancel] is displayed, then select [OK]. When printing with [Print order], you can select [Resume] to continue printing the remaining images if you have stopped printing in progress. Note that printing will not resume if any of the following occurs.
Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer's instruction manual. Print settings screen (1) Sets date or file number printing ( (2) Sets the printing effects ( ). (3) Sets the number of copies to print ( (4) Sets the print area ( (5) Sets the paper size, type, and layout ( (6) Returns to the image selection screen. (7) Starts the printing.
Paper settings Select [Paper settings]. [ ] Setting the paper size Select the size of the paper in the printer.
[ ] Setting the paper type Select the type of the paper in the printer. [ ] Setting the page layout Select the page layout. Caution If the image's aspect ratio is different from the printing paper's aspect ratio, the image may be cropped significantly when you print it as a borderless print. Images may also be printed at lower resolution. [ ] Setting printing of the date/file number Select [ ]. Select what to print.
[ ] Setting printing effects (image optimization) Select [ ]. Select printing effects. Caution ISO speeds may be misidentified in shooting information printed for images shot at an expanded ISO speed (H). [Default] in printing effects and other options refers to default settings determined by the printer manufacturer. For [Default] details, refer to the printer instruction manual. [ ] Setting the number of copies Select [ ]. Select the number of copies to print.
Cropping the image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. 1. Select [Cropping] on the print setting screen. 2. Set the cropping frame size, position, and orientation. The image area within the cropping frame will be printed. The shape of the frame (aspect ratio) can be changed in [Paper settings]. Resizing the cropping frame size Turn the < > dial to resize the cropping frame size.
Note Handling printer errors If printing does not resume after you resolve a printer error (such as no ink or paper) and select [Continue], use buttons on the printer. For details on resuming printing, refer to the printer's instruction manual. Error messages If a problem occurs during printing, an error message will appear on the camera screen. After fixing the problem, resume printing. For details on how to fix a printing problem, refer to the printer's instruction manual.
Sending Images to a Web Service Connecting to image.canon Automatic Image Transfer This section describes how to send images to image.canon. Connecting to image.canon Link the camera to image.canon to send images directly from the camera. A computer or smartphone with a browser and internet connection is required. You will need to enter an email address used on your computer or smartphone. For instructions on how to use image.
3. Select [Connect]. 4. Select [OK]. 5. Scan the QR code with the dedicated app. Select [OK].
6. Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Go to step 6 in Wi-Fi Connection via Access Points. 7. Confirm that the number is displayed in the dedicated app. Select [OK].
8. Select [OK]. The [ ] icon changes to [ ]. Steps on the computer or smartphone 9. Set up camera web link. Follow the instructions to complete the settings on the camera web link settings page.
Automatic Image Transfer Images are automatically uploaded to image.canon after the camera starts up (or recovers from auto power off). Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services. Uploading is not possible during interval timer shooting. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Upload to image.canon].
4. Set [Type to send]. In [Type to send], you can select the type of images that uploading applies to.
Streaming Images Preparing to Stream Live Streaming You can live-stream images from the camera. Only when streaming, you can use Wireless Remote Control BR-E1 (sold separately). Note that before streaming, you will need to pair the camera with Wireless Remote Control BR-E1 ( ). Caution Check the YouTube streaming requirements in advance on the YouTube site. Preparing to Stream Set up “Live streaming” on the camera to enable streaming from the camera. Register the camera for image.
Steps on the camera 2. Connect to image.canon. For instructions on connecting to image.canon, see Connecting to image.canon. A [Live streaming] icon is added once the camera is connected to image.canon. If the [Live streaming] icon does not work, see Steps on the computer or smartphone and check the YouTube settings. After setup, selecting [Live streaming] activates the icon.
Caution Streaming YouTube is the only streaming service supported by this camera. Before you can use streaming services, you must complete image.canon registration. YouTube streaming is subject to change, suspension, or termination without prior notice. Canon is in no way responsible for third-party services such as YouTube streaming. No image is recorded to the card during streaming (but a card must be in the camera). Images are streamed at approx. 6 Mbps for either (NTSC) or (PAL).
Live Streaming You can also stream by using the camera to select an event that you have set up in advance on the YouTube site (by entering the streaming time and title). 1. Complete event settings on the YouTube site. For instructions, visit the YouTube site. 2. Set the Mode dial to < >. You can select a movie recording mode ( 3. ). Start streaming. On the [ : Wi-Fi/Bluetooth connection] screen, select [Live streaming]. If the history ( ) is displayed, switch screens with the < < > as needed.
4. Check the terms of service. Read the agreement displayed and choose [I Agree]. 5. Select an event. Select an event that you have added from the YouTube site in advance. Up to 20 events are listed. Note In case of messages indicating that streaming cannot be started, the event has not been registered yet. Add the event from the YouTube site.
6. Check the streaming details. Select [OK]. 7. Select [OK]. 8. Select [PRVW] or [LIVE]. Selecting [PRVW] (Preview) enables you to test streaming without releasing images publicly. Useful for checking images before streaming. Selecting [LIVE] (Live) enables you to start streaming immediately.
9. Start previewing or streaming. Configure recording features, just as in normal movie recording. When ready, press the movie shooting button. Previewing or streaming starts automatically after [Preparing preview] or [Preparing to stream] is displayed. [ PRVW] or [ LIVE] is displayed in the upper right during previewing or streaming, respectively. The time that has elapsed since you pressed the movie shooting button is shown on the previewing/streaming screen (1).
11. Exit streaming mode. Press the < > button, then select [OK]. Caution It will take a moment before streaming begins in step 9. Do not operate the camera while the message is displayed. In case of display problems (character corruption) on the camera for text you entered on the YouTube site, enter the text again from the YouTube site in ASCII format (single-byte letters or numbers).
Wi-Fi Connection via Access Points Camera Access Point Mode Manual IP Address Setup This section describes how to join a Wi-Fi network via an access point compatible with WPS (PBC mode). First, check the position of the WPS button and how long to press it. It may take approx. 1 min. to establish a Wi-Fi connection. 1. Select [ 2. Select an option. : Wi-Fi/Bluetooth connection]. If the history ( ) is displayed, switch screens with the < < > as needed.
3. Select [Add a device to connect to]. The following message is displayed if you have selected [ Connect to smartphone]. If Camera Connect is already installed, select [Do not display]. On the [Connect to smartphone] screen displayed next, select [Connect via Wi-Fi]. 4. Select [Switch network]. Displayed when [ ], [ ], or [ 718 ] is selected.
5. Select [Connect with WPS]. Note For [Camera access point mode] displayed in step 5, see Camera Access Point Mode. 6. Select [WPS (PBC mode)]. Select [OK].
7. Connect to the access point via Wi-Fi. Press the access point's WPS button. Select [OK]. 8. Select [Auto setting]. Select [OK] to access the setting screen for the Wi-Fi function. If an error occurs with [Auto setting], see Manual IP Address Setup.
9. Specify the settings for the Wi-Fi function. [ Connect to smartphone] On the smartphone's Wi-Fi setting screen, tap the SSID (network name) shown on the camera screen, then enter the password of the access point for the connection. Go to step 7 in Wi-Fi Connection without Using Bluetooth. [ Remote control (EOS Utility)] Go to step 7 or 8 in Steps on the computer (2). [ Print from Wi-Fi printer] Go to step 6 in Connecting to a Printer via Wi-Fi. Register image.canon.
Camera Access Point Mode Camera access point mode is a connection mode for connecting the camera directly to each device via Wi-Fi. Displayed when [ ], [ ], or [ ] is selected after [ : Wi-Fi/Bluetooth connection]. Easy connection Use the other device to establish a Wi-Fi connection with the SSID shown on the camera screen. Manual connection Enter the SSID of the other device to establish a connection. Follow the instructions on the camera screen to complete the connection settings.
Manual IP Address Setup The options displayed vary depending on the Wi-Fi function. 1. Select [Manual setting]. Select [OK]. 2. Select an option. Select an option to access the screen for numerical input. To use a gateway, select [Enable], then select [Address].
3. Enter the number. Turn the < > dial to move the input position in the upper area, and use the < > dial or < > to select numbers to enter. Press the < > button to enter the selected number. To delete the number just entered, press the < > button. Select [OK] after the numbers have been entered. Display returns to the screen in step 2. 4. Select [OK]. When you have completed setting the necessary items, select [OK].
Connecting to a Wireless Remote Control Canceling the Pairing This camera can also be connected to Wireless Remote Control BR-E1 (sold separately, via Bluetooth for remote control shooting. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Connect to Wireless Remote]. 3. Select [Add a device to connect to].
4. Pair the devices. When the [Pairing] screen appears, press and hold the and buttons on the BR-E1 simultaneously for at least 3 sec. After a message confirms that the camera is paired with the BR-E1, press the < > button. 5. Set up the camera for remote shooting. When shooting still photos, select [ For movie recording, set [ ] or [ ] as the drive mode ( : Remote control] to [Enable]. For instructions after the pairing is complete, refer to the BR-E1's Instruction Manual.
Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Connect to Wireless Remote]. 3. Select [Delete connection information].
4. Select [OK].
Reconnecting via Wi-Fi/Bluetooth Follow these steps to reconnect to devices or Web services with registered connection settings. 1. Select [ 2. Select an option. : Wi-Fi/Bluetooth connection]. Select an option to connect to via Wi-Fi or Bluetooth from the past connections listed. If the option is not listed, turn the < > dial to switch screens. The history is not displayed when [Connection history] is set to [Hide] ( ).
3. Operate the connected device. [ ] Smartphone Start Camera Connect. If the smartphone's connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a smartphone via Wi-Fi, “_Canon0A” is displayed at the end of the SSID. [ ] Computer On the computer, start the EOS software.
Registering Multiple Connection Settings You can register up to 10 connection settings for the wireless communication functions. 1. Select [ 2. Select an option. : Wi-Fi/Bluetooth connection]. If the history ( ) is displayed, switch screens with the < < > as needed. > dial or For details on [ Connect to smartphone], see Connecting to a Smartphone. For details on [ Remote control (EOS Utility)], see Connecting to a Computer via Wi-Fi.
Airplane Mode You can temporarily disable Wi-Fi and Bluetooth functions. 1. Select [ 2. Set to [On]. [ : Airplane mode]. ] is displayed on the screen. Note [ ] may not be displayed in still photo shooting, movie recording, or playback, depending on display settings. If it is not displayed, press the < > button repeatedly to access detailed information display.
Wi-Fi Settings 1. Select [ 2. Select an option. : Wi-Fi settings]. Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. Connection history You can set the connection history for devices connected via Wi-Fi to [Show] or [Do not display]. Send to smartphone after shot Images can be transferred to a smartphone automatically ( MAC address You can check the MAC address of the camera. 733 ).
Bluetooth Settings 1. Select [ 2. Select an option. : Bluetooth settings]. Bluetooth If you will not use the Bluetooth function, select [Disable]. Check connection information You can check the name and communication status of the paired device. Bluetooth address You can check the camera's Bluetooth address.
Nickname You can change the camera nickname (displayed on smartphones and other cameras) as needed. 1. Select [ 2. Enter text using the Virtual Keyboard Operations. : Nickname]. When you finish entering characters, press the < 735 > button.
GPS Device Settings GP-E2 Smartphone GPS Connection Display You can geotag images with GPS Receiver GP-E2 (sold separately) or a Bluetoothcompatible smartphone. GP-E2 1. Attach GP-E2 to the camera. Attach GP-E2 to the camera's hot shoe and turn it on. For details, refer to the GP-E2 Instruction Manual. 2. Select [ : GPS device settings].
3. In [Select GPS device], select [GPS receiver]. 4. Take the picture. For details on [Set up], refer to the GP-E2 Instruction Manual. Caution Precautions when using GP-E2 Before use, check the countries and regions where use of GPS is allowed, and follow local regulations. Update the GP-E2 firmware to Ver. 2.0.0 or later. Firmware updating requires an interface cable. For updating instructions, visit the Canon website. GP-E2 cannot be connected to the camera with a cable.
Smartphone Complete these settings after installing the dedicated Camera Connect app ( smartphone. 1. On the smartphone, activate location services. 2. Establish a Bluetooth connection. ) on the Start Camera Connect and pair the camera and smartphone via Bluetooth. 3. Select [ 4. In [Select GPS device], select [Smartphone]. 5. Take the picture. : GPS device settings]. Images are geotagged with the information from the smartphone.
GPS Connection Display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo shooting or movie recording ( and , respectively). Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired For details on how GPS connection status is indicated when GP-E2 is used, refer to the GP-E2 Instruction Manual.
Caution The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on. Location information is no longer acquired after any of the following operations.
Changing or Deleting Connection Settings To change or delete the connection settings, terminate the Wi-Fi connection first. 1. Select [ 2. Select an option. : Wi-Fi/Bluetooth connection]. If the history ( ) is displayed, switch screens with the < < > as needed.
3. Select [Edit/delete device]. You can change the Bluetooth connection by selecting a smartphone labeled with [ ] in gray. After the [Connect to smartphone] screen is displayed, select [Pair via Bluetooth], then press the < > button on the next screen. 4. Select the device for which to change or delete the connection settings.
5. Select an option. Change or delete the connection settings on the displayed screen. Change device nickname You can change the nickname using the virtual keyboard ( Viewable imgs ( ). ) Displayed when [ Connect to smartphone] is selected. Settings will appear at the bottom of the screen. Delete connection information When deleting connection information for a paired smartphone, also delete the camera information registered on the smartphone ( ). Note To delete image.
Resetting Communication Settings All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. 1. Select [ 2. Select [OK]. : Reset communication settings].
View Info Screen You can check error details and the camera's MAC address. 1. Select [ 2. Press the < : Wi-Fi/Bluetooth connection]. > button. The [View info] screen appears. If an error has occurred, press the < 745 > button to display error details.
Virtual Keyboard Operations (1) Input area, for entering text (2) Cursor keys, for moving in the input area (3) Current no. of characters/no. available (4) Keyboard (5) Switch input modes (6) Space (7) Delete a character in the input area (8) Exit input Use the < > dial to move within (1). Use < >, the < > dial, or < > to move within (2) and (4)–(7). Press the < > button to confirm input or when switching input modes.
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press the < > button. Select [Error details] on the [Wi-Fi on] screen. Click the following error numbers to jump to the corresponding section.
11: Connection target not found In the case of [ ], is Camera Connect running? • Establish a connection using Camera Connect ( In the case of [ ). ], is EOS Utility running? • Start EOS Utility and try to connect again ( ). Are the camera and the access point set to use the same encryption key for authentication? • This error occurs if the encryption keys do not match when the authentication method for encryption is [Open system].
22: No response from DNS server What to check on the camera On the camera, the DNS address is set to [Manual setting]. Is this the correct setting? • If no DNS server is used, set the camera's DNS address setting to [Disable] ( ). On the camera, does the DNS server's IP address setting match the server's actual address? • Configure the IP address on the camera to match the actual DNS server address ( , ). What to check on the DNS server Is the power of the DNS server on? • Turn the DNS server on.
23: Device with same IP address exists on selected network Is another device on the camera network using the same IP address as the camera? • Change the camera's IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address. • If the camera's IP address is set to [Manual setting] in network environments using a DHCP server, change the setting to [Auto setting] ( ).
64: Cannot connect to wireless LAN terminal Are the camera and the access point set to use the same encryption method? • The camera supports the following encryption methods: WEP, TKIP, and AES ( ). If filtering by MAC address is active, is the MAC address of the camera in use registered at the access point? • Register the MAC address of the camera used to the access point. The MAC address can be checked on the [MAC address] screen ( ).
130: The server is currently busy Please wait a moment and try again The image.canon site is busy at the moment. • Try accessing image.canon over Wi-Fi again later. 131: Try again An error occurred when connecting to image.canon over Wi-Fi. • Try again to establish the Wi-Fi connection to image.canon. 133: Cannot log in to Web service An error occurred when signing in to image.canon. • Check the image.canon settings. • Try accessing image.canon over Wi-Fi again later.
138: Communication error with server. Please send again. Could not connect to the server for some reason. • Check the status of cloud RAW image processing online at image.canon and try uploading the images again. 141: Printer is busy. Try connecting again. Is the printer performing a printing process? • Try again to establish the Wi-Fi connection to the printer after the printing process is finished.
Wireless Communication Function Precautions Distance between the camera and the smartphone Installation location of access point antenna Nearby electronic devices Precautions for using multiple cameras If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions.
Distance between the camera and the smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible. In this case, bring the camera and the smartphone closer together, then establish a Wi-Fi connection. Installation location of access point antenna When using indoors, install the device in the room where you are using the camera. Install the device where people or objects do not come between the device and the camera.
Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Checking Network Settings Windows Open the Windows [Command Prompt], then enter ipconfig/all and press the key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. macOS In macOS, open the [Terminal] application, enter ifconfig -a, and press the key. The IP address assigned to the computer is indicated in the [enX] item (X: number) next to [inet], in the format “***.***.***.***”.
Wireless Communication Status Wireless communication status can be checked on the screen.
Screen Communication Status Wi-Fi Function Wireless Signal Strength Wi-Fi: Disable Not connected Off Wi-Fi: Enable Connecting (Blinking) Connected Sending data Connection error (Blinking) Bluetooth Function Indicator Bluetooth Function Connection Status Screen Bluetooth connected Other than [Disable] Bluetooth not connected [Disable] Bluetooth not connected 759 Not displayed
Set-up This chapter describes menu settings on the set-up [ ] tab. (< to the right of page titles indicates functions only available in Creative Zone modes >/< >/< >/< >/< >/< >).
Tab Menus: Set-up Set-up 1 (1) Select folder • Creating a Folder (2) File numbering (3) Format card (4) Auto rotate (5) Add rotate info (6) Date/Time/Zone (7) Language Set-up 2 (1) Video system (2) Help text size (3) Mode guide (4) Beep (5) Volume (6) Power saving 761
Set-up 3 (1) Screen/viewfinder display (2) Screen brightness (3) Viewfinder brightness (4) Fine-tune VF color tone (5) UI magnification (6) HDMI resolution Set-up 4 (1) Touch control (2) Multi function lock (3) switch (AF/MF) (4) Sensor cleaning (5) Choose USB connection app 762
Set-up 5 (1) Reset camera (2) Custom shooting mode (C1, C2) (3) Battery info.
Folder Settings Creating a Folder Selecting a Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder 1. Select [ : Select folder]. 2. Select [Create folder].
3. Select [OK].
Selecting a Folder (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select a folder on the folder selection screen. Captured images are stored in your selected folder. Note Folders Folders are named as in “100CANON,” with a three-digit folder number followed by five letters or numbers. A folder can contain up to 9999 images (file number 0001– 9999). When a folder becomes full, a new folder with the folder number increased by one is created automatically.
File Numbering Continuous Auto Reset Manual Reset The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) (1) File number 1. Select [ : File numbering].
2. Set the item. Select [Numbering]. Select [Continuous] or [Auto reset]. If you want to reset the file numbering, select [Manual reset] ( ). Select [OK] to create a new folder, and the file number will start with 0001. Caution If the file number in folder 999 reaches 9999, shooting will not be possible even if the card still has free space. After a message requesting you to replace the card is displayed, switch to a new card.
Continuous For continuous file numbering regardless of switching cards or creating folders Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
Auto Reset For restarting file numbering from 0001 after switching cards or creating folders When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders. If the replacement card or existing folder already contains images recorded previously, the file numbering of the new images may continue from the file numbering of the existing images on the card or in the folder.
Manual Reset For resetting file numbering to 0001 or starting from 0001 in new folders When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.
Card Formatting If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. Caution When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1. Select [ : Format card].
2. Format the card. Select [OK]. For low-level formatting, press the < > button to add a checkmark [ ] to [Low level format], then select [OK].
Conditions requiring card formatting The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed ( ). Low-level formatting Perform low-level formatting if the card's writing or reading speed seems slow or if you want to totally erase the data on the card. Since low-level formatting will format all recordable sectors on the card, the formatting will take longer than normal formatting.
Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. 1. Select [ : Auto rotate].
2. Select an option. On Automatically rotates images for display on both the camera and computers. On Automatically rotates images only for display on computers. Off Images are not automatically rotated. Caution Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On]. Note If a picture is taken while the camera is aimed up or down, automatic rotation to the proper orientation for viewing may not be performed correctly.
Adding Orientation Information to Movies For movies recorded with the camera held vertically, orientation information indicating which side is up can be added automatically to enable playback in the same orientation on smartphones or other devices. 1. Select [ : Add 2. Select an option. rotate info]. Enable Play movies on smartphones or other devices in the orientation in which they were recorded.
Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow these steps to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it. Since the captured images will be appended with the shooting date and time information, be sure to set your date/time. 1. Select [ : Date/Time/Zone]. 2. Set the time zone. Turn the < > dial to select [Time zone].
Select the time zone. If your time zone is not listed, press the < difference from UTC in [Time difference]. > button, then set the Select a [Time difference] option (+–/hour/minute), then press the < > button. After setting the item, press the < > button. After entering the time zone or time difference, select [OK]. 3. Set the date and time. Select an item, then press the < After setting the item, press the < 779 > button. > button.
4. Set daylight saving time. Set it as necessary. Select [ ] or [ ], then press the < > button. When the daylight saving time is set to [ ], the time set in step 3 will advance by 1 hour. If [ ] is set, the daylight saving time will be canceled and the time will go back by 1 hour. 5. Exit the setting. Select [OK].
Language 1. Select [ : Language 2. Set the desired language. ].
Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. 1. Select [ : Video system]. 2. Select an option. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For PAL For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Help Changing the Help Text Size When [ Help] is displayed, you can display a description of the feature by pressing the < > button. Press it again to exit Help display. To scroll the screen when a scrollbar (1) appears on the right, turn the < > dial.
Example: [ : Multi function lock] < > 784
Changing the Help Text Size 1. Select [ : Help text size]. 2. Select an option.
Shooting Mode Guide A brief description of the shooting mode can be displayed when you switch shooting modes. The default setting is [Enable]. 1. Select [ : Mode guide]. 2. Select [Enable]. 3. Turn the Mode dial. A description of the selected shooting mode will appear.
4. Press the < > key. The rest of the description will appear. To clear the mode guide, press the < > button. In < >/< > mode, you can display the shooting mode selection screen.
Beeps 1. Select [ : Beep]. 2. Select an option. Enable The camera beeps after focusing and in response to touch operations. Disable Disables beeping for focusing, self-timer, shutter, and touch operations. Note By default, beeping volume for touch operations is set to [0] ( 788 ).
Volume The volume of camera sounds is adjustable. 1. Select [ : Volume]. 2. Set the option. Select an option, then turn the < 789 > dial to adjust the volume.
Power Saving You can adjust the timing of when the screen dims and then turns off, when the camera turns off, and when the viewfinder turns off after the camera is left idle (Screen dimmer, Screen off, Auto power off, and Viewfinder off). 1. Select [ : Power saving]. 2. Select an option.
Note [Screen dimmer] and [Screen off] apply while the shooting screen is displayed. These settings do not apply during menu display or image playback. The camera turns off during menu display or image playback after the time set in [Screen dimmer], [Screen off], and [Auto power off] elapses. To protect the screen, the screen turns off 30 min. after it is dimmed (although the camera itself remains on), even if [Screen off] and [Auto power off] are set to [Disable].
Screen and Viewfinder Display You can specify to use the screen or viewfinder for display, to avoid accidentally activating the viewfinder sensor when the screen is open. 1. Select [ : Screen/viewfinder display]. 2. Select an option. AUTO1: Auto 1 ( : only screen) Always use the screen for display when it is open. Use the screen for display when it is closed and facing you, and switch to the viewfinder when you look through it.
Note You can also switch between viewfinder and screen display by pressing a button you have customized by assigning to switching. With this setting set to [AUTO1] or [AUTO2], the camera responds to the viewfinder sensor accordingly. With [AUTO1] set, the camera does not respond to the viewfinder sensor when the screen is open.
Screen Brightness 1. Select [ : Screen brightness]. 2. Make the adjustment. Referring to the gray image, turn the < > dial to adjust brightness, > button. Check the effect on the screen. then press the < Note To check the image's exposure, referring to the histogram is recommended ( 794 ).
Viewfinder Brightness 1. Select [ : Viewfinder brightness]. 2. Turn the < > dial and select either [Auto] or [Manual]. Auto Press the < shooting. > button. Check the effect in the viewfinder while Manual Turn the < > dial to adjust viewfinder brightness, then press the < > button. Check the effect in the viewfinder.
Fine-Tuning Viewfinder Color Tone 1. Select [ : Fine-tune VF color tone]. 2. Make the adjustment. Referring to the gray image, use < > for adjustment, then press the > button. Check the effect in the viewfinder.
UI Magnification You can magnify menu screens by double-tapping with two fingers. Double-tap again to restore the original display size. 1. Select [ : UI magnification]. 2. Select [Enable]. Caution Use camera controls when configuring menu functions with the display magnified. Touch-screen operations are not supported.
HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. 1. Select [ : HDMI resolution]. 2. Select an option. Auto The images will automatically be displayed at the optimum resolution matching the connected television. 1080p Output at 1080p resolution. Select if you prefer to avoid display or delay issues when the camera switches resolution.
Touch Control 1. Select [ : Touch control]. 2. Select an option. [Sensitive] makes the touch-screen panel more responsive than [Standard]. To disable touch operations, select [Disable]. Caution Precautions for touch-screen panel operations Do not use sharp objects such as fingernails or ballpoint pens for touch operations. Do not use wet fingers for touch operations. If the screen has any moisture or if your fingers are wet, the touch-screen panel may not respond or malfunction may occur.
Multi-Function Lock Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings. 1. Select [ : Multi function lock]. 2. Select camera controls to lock. Press the < > button to add a checkmark [ ]. Select [OK]. Pressing the < controls. > button locks the selected [ ] camera Note An asterisk “*” to the right of [ : Multi function lock] indicates that the default setting has been modified.
Focus Mode Switch (AF/MF) When an RF lens without a focus mode switch is attached, you can configure operation of the camera's focus mode switch. 1. Select [ : 2. Select an option. switch (AF/MF)]. Enable Enables the camera's focus mode switch. Disable Disables the camera's focus mode switch. In this case, set [AF] or [MF] in [ : Focus mode] ( ). This can help prevent accidentally changing settings.
Sensor Cleaning Cleaning Now Cleaning Automatically The camera's sensor cleaning feature cleans the front of the image sensor. Note For best results, clean with the camera in a stable position on a desk or other flat surface. Cleaning Now 1. Select [ : Sensor cleaning]. 2. Select [Clean now ]. Select [OK] on the confirmation screen.
Note Even if you repeat the sensor cleaning, the result will not improve much. Note that [Clean now ] may not be available immediately after cleaning.
Cleaning Automatically 1. Select [Auto cleaning 2. Select an option. Turn the < ]. > dial to select an option, then press the < > button. Note When set to [At pwr off] or [Enable], the sensor is cleaned when the screen goes off, including when it has been turned off automatically.
App Selection for USB Connections By connecting the camera to a smartphone or computer with the interface cable, you can transfer images or import images to the smartphone or computer. 1. Select [ : Choose USB connection app]. 2. Select an option. Photo Import/Remote Control Select if you will use EOS Utility after connecting to a computer, or if you will use dedicated Android apps or the iOS version of Photos. Canon app(s) for iPhone Select if you will use an iOS app.
Resetting the Camera The camera's settings for shooting functions and menu functions can be restored to their defaults. 1. Select [ : Reset camera]. 2. Select an option. Basic settings Restores default settings for camera shooting functions and menu settings. Other settings Settings for individual selected options can be reset. 3. Clear the settings. Select [OK] on the confirmation screen.
Custom Shooting Mode (C1, C2) Automatic Update of Registered Settings Canceling Registered Custom Shooting Modes Current camera settings such as shooting, menu, and Custom Function settings can be registered in Custom shooting modes < > or < >. 1. Select [ : Custom shooting mode (C1, C2)]. 2. Select [Register settings].
3. Register the desired items. Select the Custom shooting mode to register, then select [OK] on the [Register settings] screen. The current camera settings are registered to Custom shooting mode C*. Automatic Update of Registered Settings If you change a setting while shooting in Custom shooting mode, the mode can be automatically updated with the new setting (Auto update). To enable this automatic update, set [Auto update set.] to [Enable] in step 2.
Canceling Registered Custom Shooting Modes If you select [Clear settings] in step 2, the settings of each mode can be restored to default settings, as they were before registration. Note You can also change shooting and menu settings in Custom shooting modes.
Battery Information You can check the conditions of the battery you are using on the screen. 1. Select [ : Battery info.]. (1) Battery position (2) Model of battery or household power source used (3) Remaining battery level ( ) (4) Battery recharge performance, in three levels (Green): Battery recharge performance is good. (Green): Battery recharge performance is slightly degraded. (Red): Purchasing a new battery is recommended. Caution Using a genuine Canon Battery Pack LP-E17 is recommended.
Note If a battery communication error message is displayed, follow the instructions in the message.
Copyright Information Checking the Copyright Information Deleting the Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. Caution If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.]. Note You can also set or check copyright information with EOS Utility (EOS software, ). 1. Select [ : Copyright information]. 2. Select an option.
3. Enter text. Use the < > dial or < < > button to enter it. By selecting [ Select [ 4. > to select a character, then press the ], you can change the input mode. ] to delete a character. Exit the setting. Press the < > button, then press [OK]. Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered.
Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.
Other Information Manual/software URL To download instruction manuals, select [ : Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. Certification Logo Display Select [ : Certification Logo Display] to display some of the logos of the camera's certifications. Other certification logos can be found on the camera body and packaging.
Custom Functions/My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs.
Tab Menus: Custom Functions Custom Functions 1 (1) Exposure level increments (2) ISO speed setting increments (3) Speed from metering/ISO Auto (4) Bracketing auto cancel (5) Bracketing sequence (6) Number of bracketed shots (7) Safety shift Custom Functions 2 (1) Same expo. for new aperture (2) AE lock meter.
Custom Functions 3 (1) (2) direction to set Tv/Av direction to set Tv/Av (3) Switch / when shooting (4) Customize buttons (5) Customize dials (6) Clear customized settings Custom Functions 4 (1) Add cropping information (3) Default Erase option (4) Release shutter w/o lens (5) Retract lens on power off 818
Custom Functions 5 (1) Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings.
Custom Function Setting Items C.Fn1 C.Fn2 C.Fn3 C.Fn4 C.Fn5 You can customize camera features on the [ ] tab to suit your shooting preferences. Any settings you change from default values are displayed in blue.
C.Fn1 Exposure level increments Sets 1/2-stop increments for the shutter speed, aperture value, exposure compensation, AEB, flash exposure compensation, etc. 1/3: 1/3-stop 1/2: 1/2-stop Note Display when set to [1/2-stop] is as follows. ISO speed setting increments You can change the manual ISO speed setting increment to a whole stop. 1/3: 1/3-stop 1/1: 1-stop Note Even if [1-stop] is set, ISO speed will be automatically set in 1/3-stop increments when ISO Auto is set.
Speed from metering/ISO Auto You can set the ISO speed status after the metering timer ends in cases where, for ISO Auto operation in < >/< >/< >/< >/< > mode, the camera has adjusted the ISO speed during metering or during the metering timer. : Restore Auto after metering : Retain speed after metering Bracketing auto cancel You can specify to cancel AEB and white balance bracketing when the power switch is set to < >.
Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, -, +], the bracketed shots will be taken as shown in the following table.
Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. [Shutter speed/Aperture] applies to < > or < > mode. [ISO speed] applies to < >, < >, or < > mode. OFF: Disable Tv/Av: Shutter speed/Aperture ISO: ISO speed Note Safety shift overrides any changes to [ISO speed range] or [Min. shutter spd.
C.Fn2 Same expo. for new aperture The maximum aperture value may decrease (the lowest f/number may increase) in < > mode (manual exposure shooting) with ISO speed set manually (except when set to ISO Auto) if you (1) Change lenses, (2) Attach an extender, or (3) Use a zoom lens with a variable maximum aperture value. This function prevents the corresponding underexposure by adjusting ISO speed or shutter speed (Tv value) automatically to maintain the same exposure as before (1), (2), or (3).
AE lock meter. mode after focus For each metering mode, you can specify whether to lock the exposure (AE lock) once subjects are in focus with One-Shot AF. The exposure will be locked while you keep pressing the shutter button halfway. Select metering modes for AE lock and add a checkmark [ ]. Select [OK] to register the setting. Set shutter speed range >, You can set the shutter speed range for each [ : Shutter mode] option.
Set aperture range >, < >, < >, or < > mode, you can You can set the aperture value range. In < set the aperture value manually within your specified range. In < > and < > mode, or in < > mode with the aperture value set to [AUTO], the aperture value is set automatically within your specified range. Select [OK] to register the setting. Max. aperture Can be set in a range of f/1.0–f/64. Min. aperture Can be set in a range of f/91–f/1.4.
C.Fn3 direction to set Tv/Av Dial turning direction when setting the shutter speed and aperture value can be reversed. Reverses the turning direction of the < > and < > dials in < > shooting mode and only the < > dial in other shooting modes. The direction of the < > dial in < > mode matches the direction to set exposure compensation in < >, < >, and < > modes.
Switch / when shooting Functions assigned to the Main dial and Quick control dial can be reversed.
Customize buttons You can assign frequently used functions to camera buttons that are easy for you to use. Different functions, for use when shooting still photos or movies, can be assigned to the same button. 1. Select [ 2. Select a camera control. 3. Select a function to assign. : Customize buttons]. Press the < > button to set it. You can configure advanced settings for functions labeled with [ Detail set.] in the lower left of the screen by pressing the < > button.
Note [ : Customize buttons] settings are not cleared even if you select [ : Clear all Custom Func. (C.Fn)]. To clear the settings, select [ : Clear customized settings].
Functions available for customization AF ●: Default ○: Available for customization : Metering and AF start ● - ● ○ - ○ ○ - - - - - - - ○ ○ - ○ ● ○ - - - - - - ○ ● ○ ○ ○ ○ ○ ○ ○ ○ - - - - - - - ○ ○ ○ ○ ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ●*4 ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ - ○ ○ - - - - - - - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○
Exposure ●: Default ○: Available for customization : Metering start ○ - - - - - - - - - - - - - ○ ○ - ○ ○ ○ - - - - - - ●*4 - ○ ○ ○ - - - - - - ○ - ○ ○ ○ - - - - - - - - - - - - - - - - - ●*3 - ○ ○ ○ - - - - - - - ○ ○ ○ - - - - - - ○ ○ - ○ - - - - - ○ ○ ○ ○ ● ○ ○ ○ - : AE lock - ○ : AE lock (hold) - ○ ○ : AE lock, AF stop - ○ ○ : AE lock (while button pressed)*1 ○ - - : AE lock/FE lock*1 - ○ ○ :
Image ●: Default ○: Available for customization : Image quality*1 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ - : One-touch image quality setting*1 - ○ ○ ○ ○ : One-touch image quality (hold)*1 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ - ○ ○ ○ - - - - - - ○ ○ - ○ ○ ○ - - - - - - ○
Movies ●: Default ○: Available for customization : Zebra*2 - - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ - - - - - - : Movie recording - ● ○ : Pause Movie Servo AF - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ●*4 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - : Digital zoom*2 - - * 2: Cannot be assigned as a function available in still photo shooting. * 4: Default in movie recording.
Operation ●: Default ○: Available for customization : Flash function settings*1 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ● ○ ○ ○ ○ ○ - ○ - ●*3 ○ ○ - - - - - - ○ ○ ○ ○ ○ ○ ○ ○ - : Dial function settings - ○ ○ : Depth-of-field preview*1 - ○ ○ : Reset selected item in Fv mode*1 - ○ ○ - ○ ○ ○ /ISO in Fv mode*1 : Reset Tv/Av/ ○ ○ ○ ○ ○ ○ ○ ●*3 ○ ○ - ○ ○ ○ ○ ○ ● ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
: OVF sim.
Customize dials Frequently used functions can be assigned to the < 1. Select [ 2. Select a camera control. 3. Select a function to assign. : Customize dials]. Press the < > button to set it. 838 >, < >, and < > dials.
Note [ : Customize dials] settings are not cleared even if you select [ : Clear all Custom Func. (C.Fn)]. To clear the settings, select [ : Clear customized settings]. Setting [ : Switch / when shooting] to [Enable] also changes the functions you can assign.
Functions available for dials ●: Default ○: Available for customization Function Select AF area ○ AF area (hold metering button) ○ Change shutter speed ○ Change aperture value ○ Exposure compensation ○ ○ Set ISO speed ○ ○ Change shutter spd. (hold meter. btn) ○ Change aperture (hold meter. btn) ○ Exposure comp. (hold meter. btn) ● Set ISO speed (hold meter. btn) ○ Flash exp comp (hold meter.
Clear customized settings 1. Select [ 2. Select [OK]. : Clear customized settings]. [Customize buttons] and [Customize dials] are restored to defaults.
C.Fn4 Add cropping information Adding cropping information displays vertical lines for the aspect ratio specified in shooting, so that you can compose shots as if shooting with a medium- or large-format camera (6×6 cm, 4×5 inch, and so on). When you shoot, instead of cropping images recorded to the card, the camera adds aspect ratio information to images for cropping in the Digital Photo Professional (EOS software).
Default Erase option You can set which option is selected by default in the erase menu ( ), which is accessed by pressing the < > button during image playback or during review after shooting. By setting an option other than [Cancel], you can simply press the < > button to erase images quickly. : [Cancel] selected : [Erase] selected : [Erase ] selected : [Erase non- ] selected Caution Be careful not to erase images accidentally when an option other than [Cancel] is set.
Retract lens on power off You can set whether to retract gear-type STM lenses (such as RF35mm F1.8 Macro IS STM) automatically when the camera's power switch is set to < >. ON: Enable OFF: Disable Caution With auto power off, the lens will not retract regardless of the setting. Before detaching the lens, make sure that it is retracted. Note When [Enable] is set, this function takes effect regardless of the setting of the focus mode switch (AF or MF) on the camera or lens.
C.Fn5 Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings except [Customize buttons] and [Customize dials]. Note To clear settings configured with [ : Customize buttons] and [ dials], select [ : Clear customized settings].
Tab Menus: My Menu (1) Add My Menu tab (2) Delete all My Menu tabs (3) Delete all items (4) Menu display 846
Registering My Menu Creating and Adding My Menu Tabs Registering Menu Items on My Menu Tabs My Menu Tab Settings Deleting All My Menu Tabs/Deleting All Items Menu Display Settings On the My Menu tab, you can register menu items and Custom Functions you often adjust.
Creating and Adding My Menu Tabs 1. Select [Add My Menu tab]. 2. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.
Registering Menu Items on My Menu Tabs 1. Select [MY MENU*: Configure]. 2. Select [Select items to register]. 3. Register the desired items. Select an item, then press the < > button. Select [OK] on the confirmation screen. You can register up to six items. To return to the screen in step 2, press the < 849 > button.
My Menu Tab Settings You can sort and delete items on the menu tab, and rename or delete the menu tab itself. Sort registered items You can change the order of the registered items in My Menu. Select [Sort registered items], select an item to rearrange, then press the < > button. With [ ] displayed, > dial to rearrange the item, then press the < > button. turn the < Delete selected items/Delete all items on tab You can delete any of the registered items.
Rename tab You can rename the My Menu tab from [MY MENU*]. 1. Select [Rename tab]. 2. Enter text. Use the < > dial or < < > button to enter it. By selecting [ Select [ 3. > to select a character, then press the ], you can change the input mode. ] to delete a character. Confirm input. Press the < > button, then select [OK].
Deleting All My Menu Tabs/Deleting All Items You can delete all the created My Menu tabs or My Menu items registered on them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ ] tab will revert to its default. Delete all items You can delete all the items registered under the [MY MENU1] to [MY MENU5] tabs. The tabs themselves will remain.
Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the < > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ ] tab selected. Display only My Menu tab Restricts display to the [ ] tab ([ ]/[ ]/[ 853 ]/[ ]/[ ]/[ ] tabs are not displayed).
Reference This chapter provides reference information on camera features.
Importing Images to a Computer Connecting to a Computer with an Interface Cable Using a Card Reader Connecting to a Computer via Wi-Fi You can use EOS software to import images from the camera to a computer. Connecting to a Computer with an Interface Cable 1. Install EOS Utility ( 2. Connect the camera to the computer. ). Use an interface cable. Connect the other end to a USB port on the computer. 3. Use EOS Utility to import the images. Refer to the EOS Utility Instruction Manual.
Using a Card Reader You can use a card reader to import images to a computer. 1. Install Digital Photo Professional ( 2. Insert the card into the card reader. 3. Use Digital Photo Professional to import the images. ). Refer to the Digital Photo Professional Instruction Manual. Note When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Connecting to a Computer via Wi-Fi You can connect the camera to the computer via Wi-Fi and import images to the computer ( ).
Importing Images to a Smartphone Preparation Using Camera Connect Using Smartphone Features You can import images captured with the camera to a smartphone by connecting the smartphone to the camera with Multi-Function Shoe Adapter for Smartphone Link AD-P1 (sold separately, for Android smartphones only) or a USB cable. Preparation 1. Select an option in [ : Choose USB connection app] ( ).
Using Camera Connect 1. Install Camera Connect on the smartphone and start it. For details on installing Camera Connect, see Installing Camera Connect on a Smartphone. 2. Turn the camera on. 3. Tap [Images on camera]. Select images displayed to import them to the smartphone.
Using Smartphone Features 1. Turn the camera on. 2. Use the smartphone to import images. Android smartphones: In the [Files] menu, select [Canon Digital Camera ***], then import images in the DCIM folder. iPhones: Start the Photos app, then import images from the card.
Using a USB Power Adapter to Charge/Power the Camera Using USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E17 without removing it from the camera. The camera can also be powered. Charging 1. Connect the USB power adapter. With the camera power switch set to < adapter plug fully into the digital terminal.
2. Connect the power cord. Connect the power cord to the USB power adapter and plug the other end into a power outlet. Charging begins, and the access lamp (1) is lit in green. When charging is finished, the access lamp turns off. Supplying power To power the camera without charging batteries, set the camera power switch to < However, batteries are charged during auto power off. The battery level indicator is gray when power is supplied.
Caution The camera cannot be powered unless a battery pack is in it. When batteries are depleted, the adapter charges them. In this case, power is not supplied to the camera. To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours. If the charging lamp fails to light up or a problem occurs during charging (shown by the access lamp blinking in green), unplug the power cord, reinsert the battery, and wait a few minutes before plugging it in again.
Troubleshooting Guide Power-related problems Shooting-related problems Problems with wireless features Operation problems Display problems Playback problems Sensor cleaning problems Computer connection problems Problems with the multi-function shoe If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, take the camera to the nearest Canon Service Center.
The charger's lamp does not blink. For safety, hot or cold batteries inserted in the charger are not charged, and the lamp remains off. In this case, let the battery adjust to the ambient temperature before attempting to charge it again. During charging, if the battery's temperature becomes high for any reason, charging will stop automatically (lamp blinks). When the battery temperature goes down, charging will resume automatically. Batteries cannot be charged with the USB power adapter (sold separately).
The access lamp still lights or blinks even when the power switch is set >. to < If the power is turned off while an image is being recorded to the card, the access lamp will remain on or continue to blink for a few seconds. When the image recording is complete, the power will turn off automatically. [Battery communication error. Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery packs other than a genuine Canon Battery Pack LP-E17.
Shooting-related problems The lens cannot be attached. To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with EF-M lenses ( ). No images can be shot or recorded. Make sure the card is properly inserted ( ). Slide the card's write-protect switch to the Write/Erase setting ( ). If the card is full, replace the card or delete unnecessary images to make space ( , ). Shooting is not possible if the AF point turns orange when you attempt to focus.
The continuous shooting speed is slow. High-speed continuous shooting may be slower depending on the battery level, ambient temperature, flicker reduction, shutter speed, aperture value, subject conditions, brightness, AF operation, type of lens, use of flash, shooting settings, and other conditions. For details, see Selecting the Drive Mode or Maximum burst for continuous shooting [Approx.]. The maximum burst during continuous shooting is lower.
Expanded ISO speeds cannot be selected for still photo shooting. Check the [ISO speed range] setting under [ : ISO speed settings]. Expanded ISO speeds are not available when [ : Highlight tone priority] is set to [Enable] or [Enhanced]. Expanded ISO speeds are not available when [ : HDR shooting ] is set to [Enable]. Even if I set a decreased exposure compensation, the image comes out bright. Set [ : Auto Lighting Optimizer] to [Disable] ( ).
The Speedlite always fires at full output. Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full output ( ). The flash always fires at full output when [Flash metering mode] in external flash Custom Function settings is set to [1:TTL] (autoflash) ( ). External flash exposure compensation cannot be set. If flash exposure compensation is set with the external Speedlite, compensation amount cannot be set with the camera.
The ISO speed cannot be set for movie recording. ISO speed is set automatically in [ ] recording mode. In [ ] mode, you can manually set the ISO speed ( ). The minimum speed in the ISO speed range is ISO 200 when [ : Highlight tone priority] is set to [Enable] or [Enhanced]. Expanded ISO speeds cannot be selected for movie recording. Check the [ISO speed range] setting under [ : ISO speed settings]. Expanded ISO speeds are not available when [ : Highlight tone priority] is set to [Enable] or [Enhanced].
The subject looks distorted during movie recording. If you move the camera to the left or right (panning) or shoot a moving subject, the image may look distorted. The problem may be more noticeable in time-lapse movie recording. Sound is not recorded in movies. Sound is not recorded in High Frame Rate movies. A time code is not added. Time codes are not added when you record High Frame Rate movies with [Count up] in [ : Time code] set to [Free run] ( ).
Problems with wireless features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone ( ). Pairing with a previously paired smartphone is not possible if pairing information registered for another camera remains on the smartphone.
Operation problems Settings change when I switch from still photo shooting to movie recording or vice versa. Separate settings are retained for use when shooting still photos and recording movies. Settings cannot be changed with < >, < >, < Press the < > button to release the Multi-function lock ( Check the [ : Multi function lock] setting ( ). >, < >, or < ). Touch operation is not possible. Make sure [ : Touch control] is set to [Standard] or [Sensitive] ( ).
Display problems The menu screen shows fewer tabs and items. Tabs and items on the menu screen vary for still photos and movies. The display starts with [ ] My Menu, or the [ ] tab alone is displayed. [Menu display] on the [ ] tab is set to [Display from My Menu tab] or [Display only My Menu tab]. Set [Normal display] ( ). The file name's first character is an underscore (“_”). Set [ : Color space] to [sRGB]. If [Adobe RGB] is set, the first character will be an underscore ( ).
The screen does not display a clear image. If the screen is dirty, use a soft cloth to clean it. The screen display may seem slightly slow in low temperatures or may look black in high temperatures, but it will return to normal at room temperature.
Playback problems Part of the image blinks in black. [ : Highlight alert] is set to [Enable] ( ). A red box is displayed on the image. [ : AF point disp.] is set to [Enable] ( ). During image playback, the AF points are not displayed. AF points are not displayed when the following types of images are played back: • Images taken with Multi Shot Noise Reduction applied. • Cropped images. • Images from HDR shooting with [Auto Image Align] set to [Enable]. The image cannot be erased.
Movie playback stops by itself. Extended movie playback or movie playback under high ambient temperature may cause the camera's internal temperature to rise, and movie playback may stop automatically. If this happens, playback is disabled until the camera's internal temperature decreases, so turn off the power and let the camera cool down a while. The movie appears to freeze momentarily.
Dots of light appear on the image. White, red, or blue dots of light may appear in captured images if the sensor is affected by cosmic rays or similar factors. Their appearance may be reduced by performing [Clean now ] under [ : Sensor cleaning] ( ).
Sensor cleaning problems The shutter makes a sound during sensor cleaning. Although there is a mechanical sound from the shutter during cleaning after [Clean now ] is selected, no image is recorded to the card ( ). Automatic sensor cleaning does not work. Repeatedly turning the power switch < > and < prevent the [ ] icon from being displayed ( ).
Computer connection problems I cannot import images to a computer. Install EOS Utility (EOS software) on the computer ( ). Make sure the main EOS Utility window is displayed. If the camera is already connected via Wi-Fi, it cannot communicate with any computer connected with an interface cable. Check the version of the application. Communication between the connected camera and computer does not work. When using EOS Utility (EOS software), set [ 881 : Time-lapse movie] to [Disable] ( ).
Problems with the multi-function shoe A message was displayed on the screen when I attached an accessory. If [Communication error Reattach accessory] is displayed, reattach the accessory. In case this message is displayed again after reattachment, make sure the terminals of the multi-function shoe and accessory are clean and dry. If you cannot remove the dirt or moisture, contact a Canon Service Center.
Error Codes (1) Error number (2) Cause and countermeasures If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Err xx) and request service.
ISO Speed in Movie Recording In [ ] mode ISO speed is set automatically in a range of ISO 100–12800. Setting [Max for Auto] in [ : ISO speed settings] to [H (25600)] ( ) expands the maximum speed in the automatic setting range to H (equivalent to ISO 25600). The minimum speed in the automatic setting range is ISO 200 when [ : Highlight tone priority] is set to [Enable] or [Enhanced] ( ). The maximum limit is not expanded, even when expansion is set in [Max for Auto].
Information Display Still Photo Shooting Screen Movie Recording Screen Scene Icons Playback Screen Still Photo Shooting Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
(1) Maximum burst (2) Number of available shots/Sec. until self-timer shoots (3) Focus bracketing/HDR/Multiple exposures/Multi Shot Noise Reduction/Bulb timer/Interval timer/Dual Pixel RAW shooting (4) Shooting mode (5) AF area (6) AF operation (7) Image quality (8) Movie recording size (9) Metering mode (10) Still image aspect ratio (11) Electronic level (12) AF point (1-point AF) (13) No.
(26) (27) (28) (29) (30) (31) (32) (33) (34) (35) (26) AEB/FEB (27) View Assist (28) HDR PQ (29) Flash ready/FE lock/High-speed sync (30) Accessory attached indicator (31) Drive mode (32) Electronic shutter (33) AE lock (34) Shutter speed (35) Aperture value (36) Wi-Fi function (37) GPS (38) Exposure simulation (39) Bluetooth function (40) ISO speed (41) Highlight tone priority (42) Wi-Fi signal strength (43) Exposure compensation (44) Exposure level indicator (36) (37)
Movie Recording Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
(27) (28) (29) (19) (20) (21) (22) (23) (24) (25) (26) (19) View Assist (20) HDR PQ (21) Audio recording level indicator (manual) (22) Movie self-timer (23) AE lock (24) Shutter speed (25) Overheat control (26) Aperture value (27) Wi-Fi function (28) Wi-Fi signal strength (29) Bluetooth function (30) Magnify button (31) ISO speed (32) Highlight tone priority (33) Exposure compensation (34) Exposure level indicator (metering levels) (30) (31) (32) (33) (34) Caution You can s
Note Other icons may be displayed temporarily after setting adjustments.
Scene Icons In < > shooting mode, the camera detects the type of scene and sets all settings accordingly. The detected scene type is indicated in the upper left of the screen. People Subject In Background Subjects Other Than People Motion*1 Nature/ Outdoor Scene Background Color In Motion*1 Close*2 Bright Gray Backlit Blue Sky Included Light blue Backlit *3 Sunset *3 Orange Spotlight Dark With Tripod*1 Dark blue *4 *5 *3 *3 * 1: Not displayed during movie recording.
Playback Screen Basic information display for still photos (1) (2) (3) (4) (5) (6) (10) (11) (12) (13) (14) (15) (16) (7) (8) (9) (1) HDR output status/View Assist (2) Bluetooth function (3) Wi-Fi signal strength (4) Wi-Fi function (5) Battery level (6) Current image no./Total images/No. of images found (7) Shutter speed (8) Aperture value (9) Exposure compensation amount (10) Already sent to a computer/smartphone (11) Rating (12) Image protection (13) Folder no.-File no.
Caution If the image was taken by another camera, certain shooting information may not be displayed. It may not be possible to play back images taken with this camera on other cameras.
Detailed information display for still photos (1) (10) (2) (3) (11) (12) (4) (13) (5) (14) (15) (6) (16) (7) (17) (18) (8) (9) (1) Aperture value (2) Picture Style/Settings (3) Shutter speed (4) White balance correction/Bracketing (5) Shooting mode/Multiple exposure/Frame Grab (6) White balance (7) Auto Lighting Optimizer (8) First image of scene (9) Image quality/Edited image/Cropping (10) Exposure compensation amount (11) Shooting date and time (12) Histogram (Brightness/R
Detailed information display for movies (6) (1) (2) (3) (4) (5) (7) (8) (1) Movie playback (2) Movie recording mode/High Frame Rate mode (3) Movie recording size (4) Frame rate (5) Compression method (6) Movie orientation information (7) Recording time/Time code (8) Movie recording format * For simplicity, explanations are omitted for items that are also included in basic/detailed information display for still photos, which are not shown here.
Specifications Type Type: Digital single-lens non-reflex AF/AE camera Lens mount: Canon RF mount Compatible lenses: Canon RF and RF-S lens groups * Using Mount Adapter EF-EOS R: Canon EF or EF-S lenses (EF-M lenses not compatible) Lens focal length: Approx. 1.6 times the focal length indicated on the lens Image sensor Type: CMOS sensor Effective pixels*1*2 Max. approx. 24.2 megapixels Total pixels*1 Approx. 25.5 megapixels Screen size Approx. 22.3 × 14.
Recording media Recording media SD, SDHC, SDXC memory cards SD speed class Supported UHS speed class Supported UHS-I Supported UHS-II Supported Card slot: Equipped with a single slot * Supports UHS-II Still photo recording Still photo pixel count Recorded pixels Image quality Aspect ratio JPEG/ HEIF RAW 3:2 4:3 16:9 1:1 24.0 megapixels (6000 × 4000) Approx. 21.3 megapixels*1 (5328 × 4000) Approx. 20.2 megapixels*1 (6000 × 3368) 16.0 megapixels (4000 × 4000) Approx. 10.
Still photo file size / Number of shots available Image quality JPEG*2 HEIF*3 File size [Approx. MB] Available shots [Approx.]*1 8.7 3511 4.6 6617 4.7 6439 2.6 11407 3.1 9761 1.8 16130 1.8 16264 9.1 3369 7.0 4389 5.4 5639 4.3 7172 3.7 8221 3.0 10104 2.2 14117 27.0 1142 14.0 2230 RAW*2 RAW+JPEG*2 + + RAW+HEIF*3 + + 27.0 + 8.7 861 14.0 + 8.7 1362 29.9 + 9.1 785 16.9 + 9.
Maximum burst for continuous shooting [Approx.] Number of shots available when set to [Drive mode: shooting ] without slower continuous Mechanical shutter / Electronic 1st-curtain Approx. 15 shots/sec. Shutter mode Continuous shooting speed Card used for recording Electronic shutter Approx. 23 shots/sec.
Movie recording Movie recording format: MP4 Estimated recording time, movie bit rate, and file size HDR PQ: OFF Total recording time (Approx.) Movie recording size Movie recording Frame rate (fps) NTSC 4K UHD 4K UHD Crop 4K UHD (Time-lapse movies) Full HD (High Frame Rate movies) 29.97 23.98 59.94 29.97 PAL Compression method 59.94 Full HD (Time-lapse movies) 29.97 9 hr. 27 min. 120 860 4 hr. 43 min. 18 hr. 52 min. 60 431 18 min. 1 hr. 14 min. 4 hr. 56 min. 230 1647 35 min.
HDR PQ: ON Total recording time (Approx.) Movie recording size Movie recording Frame rate (fps) NTSC 4K UHD 4K UHD Crop 4K UHD (Time-lapse movies) Full HD (High Frame Rate movies) 29.97 23.98 59.94 29.97 PAL Movie bit rate (Approx. Mbps) File size (Approx. MB/min.) 6 hr. 40 min. 170 1218 50 min. 3 hr. 20 min. 13 hr. 20 min. 85 610 IPB (Standard) 12 min. 50 min. 3 hr. 20 min. 340 2434 IPB (Light) 25 min. 1 hr. 40 min. 6 hr. 40 min. 170 1218 ALL-I 9 min. 36 min. 2 hr.
Card performance requirements (movie recording) [write/read speed] Movie recording size Resolution Frame rate (fps) NTSC PAL 59.94 50.00 SD card Compression method 8 bit 10 bit (HDR PQ) IPB (Standard) UHS Speed Class 3 or higher Video Speed Class V60 or higher IPB (Light) UHS Speed Class 3 or higher 4K UHD IPB (Standard) 29.97 23.98 25.00 119.88 100.00 IPB (Standard) Full HD 59.94 4K UHD (Time-lapse movies) 29.97 Full HD (Time-lapse movies) 29.
Built-in and external microphones Built-in microphone: Stereo microphones External microphone (External microphone IN terminal): 3.5 mm diameter stereo mini jack External microphone (Multi-function shoe): Compatible with Directional Stereo Microphone DM-E1D Viewfinder Type: OLED color electronic viewfinder Screen size: Approx. 1.00 cm (0.39 inch) Dot count: Approx. 2,360,000 dots Magnification / angle of view: Approx. 0.95× / Approx 28° (with 3:2 display, an RF50mm F1.
Autofocus Focusing method: Dual Pixel CMOS AF Focusing brightness range Still photo shooting: EV –4.0 to 20 Conditions: When used with an f/1.2 lens,* center AF point, One-Shot AF, at room temperature and ISO 100 * Except for RF lenses with a Defocus Smoothing (DS) coating. Movie recording: EV –3.5 to 20 Conditions: When used with an f/1.2 lens,* center AF point, One-Shot AF, at room temperature and ISO 100, recording in Full HD (29.97 / 25.
Exposure control Metering functions under various shooting conditions Item Metering sensor Still photo shooting Movie recording 384-zone (24×16) metering using image sensor output signals Evaluative metering Partial metering Metering mode Spot metering Center-weighted average Metering brightness range (At room temperature, ISO 100) ○ ○ * When face is detected ○ * Approx. 5.8 % in the center of the screen ○ * Approx. 2.
ISO Auto details for still photos Shooting mode Variable control of maximum ISO Auto limit for E-TTL Using flash No flash Compatible lenses ISO 100*1*2–32000*2 Incompatible lenses ISO 100*1*2–6400*2 ISO 100*1*2–1600*2 ISO 100–6400 ISO 100–3200*3 Creative Zone ISO 400*4 ISO 100–6400 Basic Zone Varies by shooting mode Varies by shooting mode * 1: ISO 200 when set to [Highlight tone priority: Enable/Enhanced]. * 2: Varies depending on the [Maximum] and [Minimum] settings for [Auto range].
ISO speed (recommended exposure index) in movie recording Manual ISO speed setting for movies ISO speed Normal ISO speed ISO 100–12800 (in 1/3- or 1-stop increments) Expanded ISO speed H (equivalent to ISO 16000–25600) (in 1/3-stop increments) * Maximum and minimum ISO speed when set manually corresponds to the [ISO speed range] setting. * The setting range is ISO 200–12800 when [Highlight tone priority] is configured.
Shutter Shutter functionality in still photo shooting Type: Electronically controlled focal-plane shutter Rolling shutter, using the image sensor Shutter mode Flash Mechanical shutter Possible Electronic 1st curtain Possible Electronic shutter Disabled Shutter speed / X-sync speed Shutter mode Mechanical shutter Electronic 1st curtain Electronic shutter Setting range Set increment X-sync 1/4000–30 sec., Bulb 1/3 stop, 1/2 stop 1/200 sec. 1/4000–30 sec., Bulb 1/3 stop, 1/2 stop 1/250 sec.
Built-in flash Type: Retractable flash Retraction method: Manual Guide no.: Guide no. of approx. 6 (ISO 100/m) / 19.7 (ISO 100/feet) Flash exposure compensation: ±2 in 1/3-stop increments Out of flash range (Example) (Approx.) Lens: RF-S18-45mm F4.5-6.3 IS STM ISO speed Wide-angle end f/4.5 m Telephoto end f/6.3 ft. m ft. 100 0.2–1.1 0.7–3.6 0.4–0.8 1.3–2.6 1600 0.4–4.4 1.3–14.4 0.4–3.2 1.3–10.5 25600 1.8–17.8 5.9–58.4 1.3–12.7 4.3–41.7 * Rounded to the first decimal place.
External flash Accessory shoe contacts: 21 pins for accessories compatible with the multi-function shoe, 5 pins for X-sync and communication Flash exposure compensation: ±3-stops in 1/3- or 1/2-stop increments Drive Drive mode and continuous shooting speed Drive modes Operating modes Single shooting Mechanical shutter Electronic 1st curtain Electronic shutter ○ High-speed continuous shooting + High-speed continuous shooting Low-speed continuous shooting One-Shot AF Servo AF One-Shot AF Servo AF On
Cloud RAW image processing A feature for uploading images to image.canon for cloud-based RAW processing. Requires some preparation, such as pairing the camera and submitting information for billing purposes. Frame grab from 4K movies Individual frames of 4K movies recorded with this camera can be saved as approx. 8.3megapixel (3840×2160) still photos (JPEG or HEIF*). * From normal movies, still photos are saved as JPEGs, and from HDR PQ movies, as HEIF images. * Only 4K and 4K Crop movies can be extracted.
External interface Digital terminal Terminal type USB Type-C Transmission Hi-Speed USB (USB 2.0) equivalent Applications • For computer communication / smartphone communication • USB battery charging / camera power supply HDMI output terminal: HDMI micro OUT terminal (Type D) External microphone input terminal: Equipped with the 3.
Power source Battery Compatible battery packs LP-E17 Quantity used 1 Battery check: Automatic battery check with 4-level display when the power switch is set to ON Battery information Power supply Type Remaining capacity 4-level indicator Recharge performance 3 levels USB battery charging/Camera power supply: Using USB Power Adapter PD-E1 AC power source Power source section AC Adapter AC-E6N Connected section DC Coupler DR-E18 Number of shots available Battery life (Approx.
Available operating time Conditions of use Temperature Available operating time Time available for bulb exposure +23°C / 73°F Time available for Live View display (on-screen recording) +23°C / 73°F Approx. 2 hr. 50 min. +23°C / 73°F Approx. 2 hr. 0°C / 32°F Approx. 1 hr. 50 min. +23°C / 73°F Approx. 3 hr. Time available for movie recording * Movie Servo AF: Disable Available movie playback time (normal playback) • IPB (Standard) Full HD • 29.97 fps / 25.00 fps Approx. 2 hr. 40 min.
Dimensions and weight Dimensions (W) × (H) × (D) Approx. 122.5 × 87.8 × 83.4mm / 4.82 × 3.46 × 3.28 in. * Based on CIPA guidelines. Weight Body (including battery and SD card) Approx. 429 g / 15.14 oz. * Based on CIPA guidelines. Body only Approx. 382 g / 13.48 oz. * Not including body cap or shoe cover.
Wi-Fi (Wireless LAN) communication Supported standards (Equivalent to IEEE 802.11b/g/n standards) Wi-Fi standards IEEE 802.11b Transmission method DSSS modulation Maximum link speed 11 Mbps IEEE 802.11g 54 Mbps OFDM modulation IEEE 802.11n 72.
Trademarks and Licensing Trademarks About MPEG-4 Licensing Accessories Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. App Store and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play and Android are trademarks of Google LLC. IOS is a trademark or registered trademark of Cisco in the U.S.
About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.
Accessories Use of genuine Canon accessories is recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).
