Owner's Manual

Table Of Contents
Caution
During movie recording, avoid changing the shutter speed, aperture value, or ISO
speed, which may record changes in the exposure or create more noise at high
ISO speeds.
When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec.
to 1/125 sec. is recommended. The faster the shutter speed, the less smooth the
subject's movement will look.
If you change the shutter speed while recording under fluorescent or LED lighting,
image flicker may be recorded.
Note
Exposure compensation with ISO Auto can be set in a range of ±3 stops as follows.
Tap the exposure level indicator
[ : Exposure comp.]
Turn the control ring while pressing the shutter button halfway
When ISO Auto is set, you can press the < > button to lock the ISO speed. After
locking during movie recording, ISO speed lock can be canceled by pressing the
< > button again.
If you press the < > button and recompose the shot, you can see the exposure
level difference on the exposure level indicator ( ) compared to when the < >
button was pressed.
350