Owner's Manual

4.
Set [No. of shots].
Select [No. of shots].
As you set the number, refer to the time required ([ ]) and playback
time ([ ]).
Select the digit.
Press the < > button to display [ ].
Set a value, then press the < > button. (Returns to [ ].)
Can be set in a range of [0002]–[3600].
Make sure the playback time ([ ]) is not displayed in red.
Select [OK] to register the setting.
The playback time ([ ]) is displayed in red if the card does not have
enough free space to record the specified number of shots. Although
the camera can continue recording, the recording will stop when the
card becomes full.
Playback time ([ ]) is displayed in red if the [No. of shots] setting
results in a file size exceeding 4 GB for a card not formatted in exFAT
( ). If you keep recording in this condition and the movie file size
reaches 4 GB, the time-lapse movie recording will stop.
Note
For details on cards that can record time-lapse movies (card
performance requirements), see Card performance requirements.
If the number of shots is set to 3600, the time-lapse movie will be
approx. 2 min. in NTSC and approx. 2 min. 24 sec. in PAL.
378