Owner's Manual

Manually selecting a subject for focus
1.
Check the tracking frame.
A tracking frame [ ] appears over any subjects detected.
Tracking frames [ ] away from AF points are displayed in gray.
Once the tracked subject is near an AF point, even if it is outside the
AF point, the tracking frame turns white (distinguishing it as an active
frame), which enables selection as the main subject. The AF point
turns gray.
Gray display of tracking frames [ ] does not apply in movie recording.
2.
Focus and shoot/record.
Once you press the shutter button halfway and the subject is in focus,
the AF point turns green and the camera beeps.
An orange AF point indicates that the camera could not focus on
subjects.
446