Owner's Manual

Note
Selecting a subject by touch with [ : AF area] set to [Whole area AF] changes
the tracking frame to [ ] and locks on to that subject for tracking across the entire
screen.
To release locked tracking, tap [ ].
Pressing the shutter button halfway when the AF point does not overlap the
tracking frame [ ] will focus using the active, white AF frame.
When AF operation is set to Servo AF, pressing the shutter button halfway focuses
using Whole area AF.
For human subjects, the active [ ] may cover only a part of the face, not the whole
face.
The size of tracking frames varies depending on the subject.
No tracking frame is displayed when [ : Subject tracking] is set to [Off],
regardless of the [
: Subject to detect] setting.
Caution
Tapping the screen to focus will focus with [One-Shot AF], regardless of the AF
operation setting.
If the subject's face is significantly out of focus, face detection will not be possible.
Adjust the focus manually ( ) so that the face can be detected, then perform AF.
AF may not detect subjects or people's faces at the edges of the screen.
Recompose the shot to center the subject or bring the subject closer to the center.
447