Owner's Manual

3.
Aim the camera at the subject.
A tracking frame is displayed around their eye.
To choose an eye to focus on when [ : AF area] is set to [Whole
area AF], either tap the screen or use < >. As you use < >, the
tracking frame changes again to [
].
You can also tap the screen to choose an eye, when [ : AF area] is
set to [Whole area AF] or during tracking in progress.
If your selected eye is not detected, an eye to focus on is selected
automatically.
4.
Take the picture.
Caution
Subject eyes may not be detected correctly, depending on the subject and shooting
conditions.
No tracking frame is displayed when [ : Subject tracking] is set to [Off], even if
[ : Subject to detect] is set to an option other than [None].
Eyes are not detected when [ : Subject to detect] is set to [None].
451