Owner's Manual

Tracking with the Button
You can press a button assigned to [Start/stop tracking] in [ : Customize buttons] to
track subjects with a tracking frame [ ]. This example is based on assigning the < >
button ( ).
1.
Check the AF point.
The AF point (1) will appear.
With Expand AF area: or Expand AF area: Around, adjacent AF
points are also displayed.
With Flexible Zone AF, the specified Zone AF frame is displayed.
2.
Press the <
> button.
The AF point changes to a tracking frame [ ], which locks on to that
subject for tracking and follows the subject within the screen if it moves.
To cancel tracking, press the < > button again.
The tracking frame changes to [ ] when multiple subjects can be
detected, and you can use < > to choose a subject to focus on.
Once tracking begins, the subject is tracked across the entire screen,
regardless of the specified AF area.
453