Owner's Manual

Table Of Contents
Manually Setting AF Points or Zone AF Frames
You can manually set the AF point or Zone AF frame. Screens such as these are shown
when set to Flexible Zone AF 1.
1.
Check the AF point or Zone AF frame.
An AF point or Zone AF frame (1) appears.
2.
Move the AF point or Zone AF frame.
Use < > to move the AF point or Zone AF frame into position for
focusing (but note that with some lenses, it may not move to the edge
of the screen).
To center the AF point or Zone AF frame, press < > straight in.
You can also focus by tapping a position on the screen.
To center the AF point or Zone AF frame, tap [ ].
You can resize Zone AF frames used for Flexible Zone AF by pressing
the < > button, followed by the < > button, then the < >
button again. Adjust the width with the
< > dial and height with the
< > dial, then press the < > button. To restore the default Zone
AF frame size, press the < > button.
457