Owner's Manual

Table Of Contents
22: No response from DNS server
What to check on the camera
On the camera, the DNS address is set to [Manual setting]. Is this the correct
setting?
If no DNS server is used, set the camera's DNS address setting to [Disable] ( ).
On the camera, does the DNS server's IP address setting match the server's
actual address?
Configure the IP address on the camera to match the actual DNS server address
( , ).
What to check on the DNS server
Is the power of the DNS server on?
Turn the DNS server on.
Are the DNS server settings for IP addresses and the corresponding names
correct?
On the DNS server, make sure IP addresses and the corresponding names are
entered correctly.
Is the DNS server working correctly?
Check the DNS server settings to make sure the server is working correctly as a
DNS server.
If applicable, ask your network administrator to ensure the DNS server is available.
What to check on the network as a whole
Does your network include a router or similar device that serves as a gateway?
If applicable, ask your network administrator for the network gateway address and
set it on the camera ( , ).
Make sure that the gateway address setting is correctly entered on all network
devices including the camera.
749