Owner's Manual

3.
Aim the camera at what you will shoot (the subject).
An AF point (1) may be displayed on the subject, under some shooting
conditions.
When an AF point is displayed on the screen, aim it over the subject.
4.
Focus on the subject.
Press the shutter button halfway to focus.
If < > blinks, manually raise the built-in flash.
You can also focus by tapping a person's face or other subject on the
screen (Touch AF).
Under low light, the AF-assist beam ( ) is automatically activated if
needed.
Once the subject is in focus, that AF point turns green and the camera
beeps (One-Shot AF).
An AF point in focus on a moving subject turns blue and tracks subject
movement (Servo AF).
94