Instruction Manual

5. Master Flash ON/OFF
The master unit’s flash firing can be enabled (ON) or disabled (OFF).
(1) (’^ On)
(2)
(*”.
This setting enables the master unit to fire a flash.
• This setting is caiied "Master fiash ON."
• This setting automatically sets the master unit's slave ID to A.
OFF): This setting (Master flash OFF) prevents the master unit
from firing a flash. It can still transmit wireless signals to
trigger the slave units.
TTL nzoevniMrtr
V MODE + _________ — SEL/SCT ZOOM
|^_!_rSE
4 Press the <SEL/SET > button and
* select .
• Pressing the < SEL/SET > button changes
the selection in the following loop:
------ (OH) -
2
3
Press the < + > or <-> button to set
either On or 0 FF .
Press the <SEL/SET> button.
will blink.
’"I or “I will appear.
If master flash OFF is set, ■ <■ 3
104