Instruction Manual
6. Wireless Flash Range
After the master and slave units have been set, position them within the
wireless flash range shown below.
• Use the mini stand (provided) for the slave unit(s). The mini stand also has a tripod socket.
• Use the bounce feature to turn the body of the slave unit so that the sensor is exposed to the
master unit.
• For an indoor setup, the positioning can be less precise since the wireless signals can bounce off
the walls.
• After positioning the master and slave unit(s), fire a lest flash to make sure the wireless flash
system works.
• Do not place any objects between the master unit and slave unit(s) which may obstruct the
wireless transmission.
1
2
Set the master unit’s flash mode to
M.
Set the camera as desired for flash
photography.
105