Instruction Manual

Custom Function Settings
Custom Functions
Function
Custom
Function No.
Setting
Description
FEB cancellation
after completion
CF-1
0 Enabled
1
Disabled
FEB sequence CF-2
0
Correct exposure, underexposure, overexposure
1 Underexposure, correct exposure, overexposure
Flash metering
system
CF-3
0 E-m
1 TTL
Slave unit SE mode
activation
CF-4
0
Activate after 60 min. of non-operation.
1
Activate after 10 min. of non-operation.
Slave unit SE mode
cancellation
CF-5
0 Enable SE mode cancellation by master unit for 1 hour.
1
Enable SE mode cancellation by master unit lor 8 hours.
Modeling flash
CF-6
0 Enabled
1
Disabled
S
* With a Type-A camera, the CF-3-1 setting will not enable wireless operation with
autoflash.
• With a Type-B camera, TTL autoflash will be set regardless of the CF-3 setting.
113