Instruction Manual

Specifications
Slave unit SE mode While the slave unit's SE mode is In effect, the slave unit turns on when a
cancellation: flash is fired.
The slave units SE mode can be canceled by the following wireless operations:
(1) When the master units test firing button is pressed.
(2) When the camera's FE lock button is pressed.
Power source: Internal power sources:
(1) Size-AA alkaline LR6 batteries (6 V) x 4
(2) Size-AA Nicad KR15/51 batteries x 4
• Size-AA lithium FR6 batteries (6 V) x 4
External power sources: (1) Compact Battery Pack CP-E2
Size-AA alkaline LR6 (AM-3) batteries (9 V) x 6
(2) Transistor Pack E
Battery Magazine TP with size-C alkaline LRU (AM-2) batteries (9 V) x 6
Ni-Cd Pack TP (NR-SC Ni-Cd batteries x 6 in sealed pack)
SE mode: With the power switch set to SE. the Speedlite enters the SE mode as
follows:
• On-camera master unit enters the SE mode after 90 sec. of non-use.
• Slave unit enters SE mode after 60 min. (or 10 min. with CF-4) of non-use.
Custom Functions:
Function
Custom
Function No.
Setting
Description
FEB
cancelation
aSercocnpleion
CF-1
0 Enabled
1 Disabled
FEB
sequence
CF-2
0
Correct exposure, underexposure, overexposure.
1 Underexposure, correct exposure, overexposure.
Flash
metering
system
CF-3
0
E-TTL
1 TTL
Slave unit
SE mode
activation
CF-4
0
Activate after 60 min. of non-operation.
1 Activate after 10 min. of non-operation.
Slave unit
SE mode
cancellation
CF-5
0
Enable SE mode cancellation by master unit lor 1 hour.
1
Enable SE mode cancellation by master unit for 8 hours.
Modeling
flash
CF-6
0
Enabled
Disabled
Dimensions (mm) and Weight:
80 (W) X 138 (H) X 112 (D). 405 g
3.1 (W) X 5.4 (H) X 4.4 (D) in, 14.2 OZ
’ All data are based on Canon's Standard Test Method.
• Subject to change without notice.
120