Instruction Manual

Using the Zoom Button and Wide Panei

Using the Wide Panel

Pull out the built-in wide panei and flip it

down to cover the fiash head. The fiash

head’s zoom setting wiii be set to 17mm

automaticaiiy.

• Using the wide panel disables the <ZOOM>

button.

* Use the wide panel with flash head at the normal

or 7° downward tilt position.

If the built-in wide panel is used and the flash head is turned or tilted for bounce flash,

the flash result may look uneven. The LCD panel display will blink as a warning.

Do not pull out the wide panel too hard. Othenvise, the wide panel may come off.

If the wide panel comes off, the

<ZOOM> button will not work. If this

happens, follow the procedure below.

• Use your linger to push in Ihe panel as

shown by the arrow.

• The < ZOOM > button will work again,

but the entire LCD panel display will

keep blinking. Take Ihe Speedlite to the

nearest Canon Service Center for

repair.