User`s guide
Flow of Mail Box Operations
2-30
2
Introduction to the Mail Box Functions
NOTE
•
If you notice a difference between the document size specified when scanning originals and the
actual print size, you can try to eliminate this error by making a Zoom Fine Adjustment in
Adjustment/Cleaning (from the Additional Functions screen). (See Chapter 4, "Customizing
Settings," in the Reference Guide.)
•
You can change the print density or cancel printing while the machine is printing.
•
To cancel printing, press [Cancel]. (You cannot cancel printing by pressing .)
•
To reserve the next print job, press [Done]
➞
select the inbox containing the document you want
to print
➞
select the document
➞
press [Print]. (See "Reserving Jobs," on p. 2-42.)
9
If the optional Card Reader-C1 is installed, remove the control card.
NOTE
For instructions on using the optional Card Reader-C1, see Chapter 3, "Optional Equipment," in
the Reference Guide.
10
If Department ID Management is set, press .
NOTE
For instructions on using Department ID Management, see Chapter 6, "System Manager
Settings," in the Reference Guide.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 30 Tuesday, May 24, 2005 12:12 PM