User`s guide

Changing the Copy (Zoom) Ratio

3-20

Basic Copying and Mail Box Features

Use the numeric keys on the touch panel display to enter values for the

original size and copy size.

❑

Press [Original Size] ➞ enter a value.

❑ Press [Copy Size] ➞ enter a value.

❑ Press [OK].

You can enter either the width or the length of the original size. If you enter the width for the

original size, make sure to enter the width for the copy (record) size as well, and vice versa.

The machine automatically calculates the correct copy (zoom) ratio based on the values you

entered; however, the original image may be cut off slightly depending on the paper (record)

size.

If the computation results in a zoom ratio greater than 200%, place your original on the

platen glass.

If the computation results in a zoom ratio less than 25% or greater than 400%, a message

appears telling you that values below 25% will be set to 25%, and values above 400% will be

set to 400%.

The selected mode is set, the display returns to the Regular Copy Basic Features screen

and the copy (zoom) ratio generated by the machine is displayed.

NOTE

•

For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the

Reference Guide.

•

To specify the horizontal (X) and vertical (Y) axis independently, press [XY Zoom].

iR6570_CMB_Upgrade_ENG_Post_Final.book Page 20 Tuesday, May 24, 2005 12:12 PM