User`s guide

Collating Copies/Prints
3-46
3
Basic Copying and Mail Box Features
Page Order (Staple)
IMPORTANT
The Staple mode can be set only if an optional finisher is attached.
Copying
1 Place your originals ➞ press [Finisher].
If necessary, see the screen shot in step 1 of "Copying" in "Page Order (Collate)," on p. 3-36.
NOTE
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to 'On', the Collate
or Offset Collate mode is automatically set when you place your originals in the feeder. (See
"Auto Collate," on p. 8-15.)
2 Specify the stapling settings.
If you want hole punches made, press [Hole Punch].
● If the optional Finisher-T1 is attached:
❑ Press [Staple] ➞ [OK].
If the optional Finisher-T1 is attached
If the optional Finsher-T1 and Puncher Unit-L1 are attached
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 46 Tuesday, May 24, 2005 12:12 PM