User`s guide
Collating Copies/Prints
3-51
3
Basic Copying and Mail Box Features
3
Press .
If the original is placed on the platen glass, follow the instructions that appear on the touch
panel display ➞ press once for each original. When scanning is complete, press [Done].
Copying starts.
NOTE
•
To cancel this setting, press [Finisher]
➞
[Cancel].
•
To cancel all the settings and return the machine to the Standard mode, press .
Mail Box
1
When using the Mail Box function, instead of placing originals,
follow the procedure below.
❑
Select the desired User Inbox number and the document to print.
❑ Press [Print].
❑ Press [Change Pr. Settings].
If necessary, see the screen shots in steps 1 to 6 of "Printing Documents Stored in an
Inbox," on p. 2-23.
The Change Print Settings screen is displayed.
2
Specify the Staple settings in accordance with steps 1 to 3 of
"Copying," on p. 3-46.
3
Press [Start Print].
If there is a current or reserved print job, the document is placed in the queue and is printed
after the current or reserved job is complete.
Printing starts.
NOTE
•
To cancel this setting, press [Finisher]
➞
[Cancel].
•
To cancel all settings and return the machine to Standard Local Print Settings, press [Initial
Settings]. To return to the Inbox Selection screen, press .
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 51 Tuesday, May 24, 2005 12:12 PM