User`s guide

Cover/Sheet Insertion
4-17
4
Special Copying and Mail Box Features
NOTE
• The screens that appear on your machine may differ from those shown here, depending on the
setting in step 2.
• A chapter page or tab paper is always copied/printed on only one side.
• If you select [Leave Blank] for the front and/or back cover and/or sheet insertion, the machine
inserts a sheet of paper from the paper source that you selected in step 4 to be used as the
copy's/print's front and/or back cover. You can also select the paper source for the sheet insertion
in step 8.
- If you are using paper that already has printing on it (e.g., company logo) as your front and/or
back cover and/or sheet insertion, then you must select [Leave Blank]. Otherwise, the machine
will copy/print your original's first or last page on the preprinted paper.
• If you select [Print on Front Side], [Print on Back Side], or [Copy on Both Side] for the front and/or
back cover and/or sheet insertion, the machine inserts a sheet of paper from the paper source
that you selected in step 4, and prints your original on its front side, back side, or on both sides.
This will then be used as the copy's/print's front cover. You can also select the paper source for
the sheet insertion in step 8.
7 Press [Add].
8 Enter the page number where you want sheet insertions,
chapter pages, or tab paper to be inserted.
● If you select [Sheet Insertion] and [Leave Blank]:
❑ Enter the page number where you want the sheet insertion added using - (numeric
keys), and press [OK].
You can change the paper source and the side(s) to be copied that you selected in steps 4
and 6 if necessary.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 17 Tuesday, May 24, 2005 12:12 PM