User`s guide

Cover/Job Separator
4-22
4
Special Copying and Mail Box Features
Cover/Job Separator
If you select multiple documents and set the Merge Documents mode, you can specify the
Cover/Job Separator mode. The Cover/Job Separator mode automatically adds front and back
covers, or job separator sheets to divide each document, using a different type of paper from
that used for the main document.
IMPORTANT
• The Cover/Job Separator mode cannot be used with the following mode(s).
- Mail Box: Group, Offset Group, Rotate Collate, Rotate Group, Saddle Stitch, Cover/Sheet Insertion,
Booklet, Form Composition, Tab Paper Creation
• You can set the Cover/Job Separator mode only if you select multiple documents and set the Merge
Documents mode. (See "Merging Documents," on p. 3-67.)
• You cannot print on the job separator sheets.
• If you select the Staple mode when the optional Finisher-T1 or Saddle Finisher-T2 is attached, you
cannot staple more than 30 sheets of A3 or A4R paper, or 50 sheets of A4 paper, including sheet
insertions.
NOTE
• The Cover/Job Separator mode is available for the Mail Box function only.
• Job separator sheets are not counted as prints.
■ Front Cover
This setting adds a front cover sheet to each set of prints. You may also print on the front cover sheet.
Selected Documents
Prints
Printed
Front Cover
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 22 Tuesday, May 24, 2005 12:12 PM